logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
E

Eiichi Sato

japan aerospace exploration agency (jaxa)

34H指数
398论文数
3.7K被引数
收录论文 55
发表时间
logo
Large-displacement post-buckling response and cyclic reliability of Cu-Al-Mn shape memory alloy actuators for spacecraft deployable thermal radiators航天器可展开散热器cu-al-mn形状记忆合金执行器的大位移后屈曲响应和循环可靠性
errACTA ASTRONAUTICA
IF3.4
err2025-03-01
err0
PREAI
errMatsueda, Rina; Ong, Fei Shen; Oshima, Sota; Tobe, Hirobumi; Sato, Eiichi; Kitazono, Koichi
err分享
err收藏
Strength enhancement strategies in brazing Ti alloys to non-oxide ceramics: An overview of Ti-6Al-4V/Si3N4 joints
errJOURNAL OF THE AMERICAN CERAMIC SOCIETY
IF3.8
err2025-02-09
err0
errOAAI
errOng, Fei Shen; Tobe, Hirobumi; Sato, Eiichi
err分享
err收藏
Simultaneous intermetallics suppression and residual-stress relaxation of heat-resistant Nb-interlayer-inserted Ti-6Al-4V/Si3N4 joints via one-step transient liquid phase bonding and brazing
errJOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
IF14.3
err2023-03-01
err8
errOAAI
errOng, Fei Shen; Tobe, Hirobumi; Sato, Eiichi
err分享
err收藏
Effect of oxidation on the bending fatigue behavior of an advanced SiC/SiC CMC component at 1000 °C in air
errJOURNAL OF THE EUROPEAN CERAMIC SOCIETY
IF6.2
err2022-08-01
err18
errOAAI
errPatel, Amit; Sato, Eiichi; Takagi, Takeshi; Shichijo, Naohiro
err分享
err收藏
Strength optimization of low-pressure transient liquid phase bonded Ti-6Al-4V similar joint with Cu-Ni multi-interlayerCu-ni多层中间层低压瞬态液相结合Ti-6Al-4V相似接头的强度优化
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2022-06-01
err5
errOAAI
errNishi, Ryotaro; Ong, Fei Shen; Tobe, Hirobumi; Sato, Eiichi
err分享
err收藏
Strength optimization of two-step-bonded Ti-6Al-4V/Si3N4 joint with Nb interlayer via transient-liquid-phase bonding and active-metal brazing
errJOURNAL OF THE EUROPEAN CERAMIC SOCIETY
IF6.2
err2022-06-01
err12
errOAAI
errOng, Fei Shen; Nishi, Ryotaro; Tobe, Hirobumi; Sato, Eiichi
err分享
err收藏
Facilitation of detwinning through controlling crystal structure in Ti-Zr-Ni-Pd high temperature shape memory alloys
errACTA MATERIALIA
IF9.3
err2022-05-01
err14
PREAI
errTobe, Hirobumi; Kojima, Shunsuke; Sato, Eiichi
err分享
err收藏
Optical three-dimensional displacement measurement based on moire methodology and its application to space structures
errOPTICS AND LASERS IN ENGINEERING
IF3.7
err2022-01-01
err9
PREAI
errRi, Shien; Yoshida, Takeshi; Tsuda, Hiroshi; Sato, Eiichi
err分享
err收藏
Residual stress induced failure of Ti-6Al-4V/Si3N4 joints brazed with Ag-Cu-Ti filler: The effects of brazing zone's elasto-plasticity and ceramics' intrinsic properties
errJOURNAL OF THE EUROPEAN CERAMIC SOCIETY
IF6.2
err2021-10-01
err33
errOAAI
errOng, Fei Shen; Rheingans, Bastian; Goto, Kenta; Tobe, Hirobumi; Ohmura, Takahito; Janczak-Rusch, Jolanta; Sato, Eiichi
err分享
err收藏
Diffusional and dislocation accommodation mechanisms in superplastic materials
errACTA MATERIALIA
IF9.3
err2020-09-01
err99
PREAI
errMasuda, Hiroshi; Sato, Eiichi
err分享
err收藏
In-situ observation of damage evolution in polycarbonate subjected to hypervelocity impact聚碳酸酯在超高速冲击下损伤演化的原位观察
errINTERNATIONAL JOURNAL OF IMPACT ENGINEERING
IF5.7
err2020-08-01
err7
PREAI
errKawai, Nobuaki; Nagano, Mikio; Hasegawa, Sunao; Sato, Eiichi
err分享
err收藏
Microstructural evolution and mechanical characterization of Nb-interlayer-inserted Ti-6Al-4V/Si3N4 joints brazed with AuNiTi filler
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2020-03-01
err21
PREAI
errOng, Fei Shen; Tobe, Hirobumi; Fujii, Go; Sato, Eiichi
err分享
err收藏
Diffusional mass flux accommodating two-dimensional grain boundary sliding in ODS ferritic steel
errACTA MATERIALIA
IF9.3
err2019-09-01
err29
errOAAI
errMasuda, Hiroshi; Tobe, Hirobumi; Sato, Eiichi; Sugino, Yoshito; Ukai, Shigeharu
err分享
err收藏
Intermetallics evolution and fracture behavior of Nb interlayer inserted Si3N4/Ti joints brazed with AgCuTi filler
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2019-08-01
err31
PREAI
errOng, Fei Shen; Tobe, Hirobumi; Sato, Eiichi
err分享
err收藏
Three-dimensional characterization of superplastic grain boundary sliding inside Al-Zn-Mg-Cu alloy sheetAl-zn-mg-cu合金板材超塑性晶界滑移的三维表征
errSCRIPTA MATERIALIA
IF5.6
err2019-04-01
err20
errOAAI
errMasuda, Hiroshi; Tobe, Hirobumi; Hara, Toru; Sato, Eiichi
err分享
err收藏
Transient creep behavior and dislocation cell structure development during creep-fatigue deformation of fully annealed Cu-Cr-Zr alloy
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2018-11-01
err6
PREAI
errDeguchi, Masaya; Yamamoto, Koji; Tobe, Hirobumi; Sato, Eiichi
err分享
err收藏
Dynamic anisotropic grain growth during superplasticity in Al-Mg-Mn alloy
errSCRIPTA MATERIALIA
IF5.6
err2018-05-01
err53
errOAAI
errMasuda, Hiroshi; Kanazawa, Takaaki; Tobe, Hirobumi; Sato, Eiichi
err分享
err收藏
Transgranular dislocation activities and substructural evolutions accommodating two-dimensional grain boundary sliding in ODS ferritic steel
errACTA MATERIALIA
IF9.3
err2017-06-01
err32
errOAAI
errMasuda, Hiroshi; Tobe, Hirobumi; Sato, Eiichi; Sugino, Yoshito; Ukai, Shigeharu
err分享
err收藏
Two-dimensional grain boundary sliding and mantle dislocation accommodation in ODS ferritic steel
errACTA MATERIALIA
IF9.3
err2016-11-01
err48
PREAI
errMasuda, Hiroshi; Tobe, Hirobumi; Sato, Eiichi; Sugino, Yoshito; Ukai, Shigeharu
err分享
err收藏
Damage propagation mechanism in low-cycle creep fatigue of Cu-Cr-Zr alloy
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2016-06-01
err14
PREAI
errDeguchi, Masaya; Tobe, Hirobumi; Sato, Eiichi
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
N
Noriaki Ohuchi
H 指数: 56 · 论文数: 569
T
Tatsuki Ohji
H 指数: 54 · 论文数: 635
S
Sunao Hasegawa
H 指数: 51 · 论文数: 766
H
Haruo Ohtani
H 指数: 50 · 论文数: 220
Y
Yoshikazu Suzuki
H 指数: 48 · 论文数: 649
查看更多