K.‐D. Bouzakis - Publications, H-index & Citations

K.‐D. Bouzakis

aristotle university of thessaloniki

42H指数

277论文数

1.2W被引数

收录论文 96

发表时间

Enhancing the Wear Resistance of CrAlN-Coated Tools in Milling and Turning Through Annealing with Optimized Duration 通过优化退火时间增强CrAlN涂层工具在铣削和车削中的耐磨性

COATINGS

IF2.8

2025-03-07

OAAI

Skordaris, Georgios; Tsakalidis, Dimitrios; Bouzakis, Konstantinos-Dionysios; Stergioudi, Fani; Bouzakis, Antonios

Extracting information from the cutting force signal to explain and exploit its discrepancy between up and down slot milling at the same chip thickness

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2024-10-01

PREAI

Bouzakis, K. -d.; Gokcen, M. -g.; Bouzakis, E.; Bouzakis, A.; Ipekoglu, M.; Osmanoglu, E.; Batuk, A. -u.

Stress, strain and strain-rate cemented carbide properties determined with a fem-supported evaluation of impact test imprints

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2021-01-01

PREAI

Bouzakis, Antonios; Skordaris, Georgios; Bouzakis, Konstantinos-Dionysios; Gokcen, Mehmet-Gokhan; Boumpakis, Apostolos; Batuk, Ahmet-Ugur; Sisman, Suleyman

Near-interface cracking in a TiN coated high speed steel due to combined shear and compression under cyclic impact loading

SURFACE & COATINGS TECHNOLOGY

IF6.1

2020-07-01

PREAI

Gsellmann, Matthias; Kluensner, Thomas; Mitterer, Christian; Marsoner, Stefan; Skordaris, Georgios; Bouzakis, Konstantinos; Leitner, Harald; Ressel, Gerald

Cutting performance improvement of MTCVD coated cemented carbide inserts via appropriate heat treatment

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2020-01-01

PREAI

Skordaris, G.; Bouzakis, K. D.; Stergioudi, F.; Kouparanis, S.; Boumpakis, A.; Bouzakis, A.

Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2019-01-01

PREAI

Skordaris, G.; Bouzakis, K-D; Kotsanis, T.; Boumpakis, A.; Stergioudi, E.; Christofilos, D.; Lemmer, O.; Koelker, W.; Woda, M.

Bias voltage effect on the mechanical properties, adhesion and milling performance of PVD films on cemented carbide inserts

WEAR

IF6.1

2018-06-01

PREAI

Skordaris, G.; Bouzakis, K-D; Charalampous, P.; Kotsanis, T.; Bouzakis, E.; Bejjani, R.

Bias voltage optimum adjustment considering coatings' strength and adhesion requirements when cutting various steels

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2018-01-01

PREAI

Skordaris, G.; Bouzakis, K-D; Kotsanis, T.; Charalampous, P.; Bouzakis, E.; Bejjani, R.

Film thickness effect on mechanical properties and milling performance of nano-structured multilayer PVD coated tools

SURFACE & COATINGS TECHNOLOGY

IF6.1

2016-12-01

PREAI

Skordaris, G.; Bouzakis, K. -D.; Kotsanis, T.; Charalampous, P.; Bouzakis, E.; Lemmer, O.; Bolz, S.

Effect of structure and residual stresses of diamond coated cemented carbide tools on the film adhesion and developed wear mechanisms in milling

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2016-01-01

PREAI

Skordaris, G.; Bouzakis, K. -D.; Charalampous, P.; Kotsanis, T.; Bouzakis, E.; Lemmer, O.

Fatigue and adhesion characterization of DLC coatings on steel substrates by perpendicular and inclined impact tests

SURFACE & COATINGS TECHNOLOGY

IF6.1

2015-08-01

PREAI

Bouzakis, K. -D.; Charalampous, P.; Skordaris, G.; Dimofte, F.; Ene, N. M.; Ehinger, R.; Gardner, S.; Modrzejewski, B. S.; Fetty, J. R.

A dynamic FEM simulation of the nano-impact test on mono- or multi-layered PVD coatings considering their graded strength properties determined by experimental-analytical procedures

SURFACE & COATINGS TECHNOLOGY

IF6.1

2015-03-01

PREAI

Skordaris, G.; Bouzakis, K. -D.; Charalampous, P.

Collaborative design in the era of cloud computing

ADVANCES IN ENGINEERING SOFTWARE

IF5.7

2015-03-01

PREAI

Andreadis, Georgios; Fourtounis, Georgios; Bouzakis, Konstantinos-Dionysios

Brittleness and fatigue effect of mono- and multi-layer PVD films on the cutting performance of coated cemented carbide inserts

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2014-01-01

PREAI

Skordaris, G.; Bouzakis, K. -D.; Charalampous, P.; Bouzakis, E.; Paraskevopoulou, R.; Lemmer, O.; Bolz, S.

Fatigue strength of diamond coatings' interface assessed by inclined impact test

SURFACE & COATINGS TECHNOLOGY

IF6.1

2013-12-01

PREAI

Bouzakis, K. -D.; Skordaris, G.; Bouzakis, E.; Makrimallakis, S.; Kombogiannis, S.; Lemmer, O.

Effect of silicon content on PVD film mechanical properties and cutting performance of coated cemented carbide inserts 硅含量对涂层硬质合金刀片PVD膜力学性能和切削性能的影响

SURFACE & COATINGS TECHNOLOGY

IF6.1

2013-12-01

PREAI

Bouzakis, K. -D.; Bouzakis, E.; Kombogiannis, S.; Paraskevopoulou, R.; Skordaris, G.; Makrimallakis, S.; Katirtzoglou, G.; Pappa, M.; Gerardis, S.; M'Saoubi, R.; Andersson, J. M.

Coated tools' performance in up and down milling stainless steel, explained by film mechanical and fatigue properties

WEAR

IF6.1

2013-06-01

PREAI

Bouzakis, K. D.; Makrimallakis, S.; Skordaris, G.; Bouzakis, E.; Kombogiannis, S.; Katirtzoglou, G.; Maliaris, G.

Fast determination of parameters describing manufacturing imperfections and operation wear of nanoindenter tips

SURFACE & COATINGS TECHNOLOGY

IF6.1

2013-01-01

PREAI

Bouzakis, K. -D.; Pappa, M.; Maliaris, G.; Michailidis, N.