logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Mateusz Kopeć

polish academy of sciences

17H指数
125论文数
1.1K被引数
收录论文 54
发表时间
logo
Finite element simulations and experimental validation of LENS-deposited IN625 yield surface identification under sequential tension/compression–torsion probing using a novel anisotropic UMAT framework有限元模拟与实验验证：利用新型各向异性UMAT框架对LENS沉积IN625在顺序拉压-扭转探针下的屈服面识别
errJournal of Materials Research and Technology-JMR&T
IF6.6
err2026-07-24
err0
errOAAI
errPankaj Kumar; Ved Prakash Dubey; Tomasz Durejko; Xiaochuan Liu; Mateusz Kopec; Zbigniew L. Kowalewski
err分享
err收藏
A Comprehensive Review on Aluminide Coatings for Ni-Based Superalloys: From Processing to Performance镍基高温合金用铝化物涂层：从制备到性能的全面综述
errCoatings
IF2.8
err2026-04-21
err0
errOAAI
errKarolina Piotrowska; Mateusz Kopec
err分享
err收藏
Functionally Graded Nickel-Based Coatings: A Comprehensive Review功能梯度镍基涂层：综合评述
errCoatings
IF2.8
err2026-04-06
err0
errOAAI
errMateusz Kopec
err分享
err收藏
Microstructural studies on early-stage deformation in thin-walled LPBF-manufactured SS316L considering its printing orientation
errMATERIALS TODAY COMMUNICATIONS
IF4.5
err2026-01-01
err0
errOAAI
errDubey, Ved Prakash; Przygucka, Dominika; Pawlik, Marzena; Kowalewski, Zbigniew L.; Wood, Paul; Kopec, Mateusz
err分享
err收藏
Microstructure and corrosion resistance of hafnium-doped aluminide layers deposited on IN 713C nickel alloy using CVD method: experimental and ab initio studies采用CVD方法在IN 713C镍合金上沉积的铪掺杂铝化物层的微观结构与耐腐蚀性能：实验与从头算研究
errArchives of Civil and Mechanical Engineering
IF4.4
err2025-11-20
err0
errOAAI
errR. Sitek; J. Kamiński; A. Wadowski; M. Kopec; B. Adamczyk-Cieślak; P. Bazarnik; M. Drajewicz; W. J. Nowak; J. S. Wróbel
err分享
err收藏
Superior fatigue response of LENS-manufactured Ti-5553 alloy
errMANUFACTURING LETTERS
IF2
err2025-10-01
err0
errOAAI
errKopec, Mateusz; Durejko, Tomasz
err分享
err收藏
Rayleigh Optic Strain Sensor for Creep Monitoring瑞利光学应变传感器用于蠕变监测
errAPPLIED SCIENCES-BASEL
IF2.5
err2025-09-06
err0
errOAAI
errKopec, Mateusz; Mierzejewska, Izabela; Grzywa, Arkadiusz; Gontarczyk, Aleksandra; Kowalewski, Zbigniew L.
err分享
err收藏
Assessment of 10CrMo9-10 Power Engineering Steel Degradation State by Using Small Punch Test通过小冲压测试评估10CrMo9-10动力工程钢的退化状态
errMaterials 2025, Vol. 18, Page 4133
IF3.2
err2025-09-04
err0
errOAAI
errKamil Majchrowicz; Barbara Romelczyk-Baishya; Monika Wieczorek-Czarnocka; Szymon Marciniak; Milena Mras; Dominik Kukla; Mateusz Kopec; Zbigniew Pakieła
err分享
err收藏
Printing orientation effects on microstructure in LPBF-manufactured SS316L subjected to fatigueLPBF制造的SS316L在疲劳作用下打印方向对微观结构的影响
errMRS COMMUNICATIONS
IF2.3
err2025-09-01
err0
errOAAI
errKopec, Mateusz; Przygucka, Dominika; Pawlik, Marzena; Wood, Paul; Jozwiak, Stanislaw; Kowalewski, Zbigniew L.
err分享
err收藏
High strain rate response of CP-titanium under low-temperature conditions: experiment and modeling低温条件下CP-titanium的高应变率响应：实验与建模
errArchives of Civil and Mechanical Engineering
IF4.4
err2025-08-29
err0
errOAAI
errMateusz Kopec; Magdalena Łazińska; Jacek Janiszewski
err分享
err收藏
Yield surface and texture evolution in Ti-Cu Bimetal: Effects of tension and Tension-Cyclic torsion Pre-DeformationTi-Cu双金属的屈服面与织构演化：拉伸与拉伸-循环扭转预变形的影响
errInternational Journal of Solids and Structures
IF3.8
err2025-08-25
err0
errOAAI
errVed Prakash Dubey; Mateusz Kopec; Magdalena Łazińska; Zbigniew L. Kowalewski
err分享
err收藏
Effect of the printing orientation on the yield surface and its evolution reflecting plastic pre-deformation of additively manufactured stainless steel 316L增材制造不锈钢316L中，打印方向对反映塑性预变形的屈服面及其演化过程的影响
errinternational journal of advanced manufacturing technology
IF0
err2025-08-16
err0
errOAAI
errVed Prakash Dubey; Mateusz Kopec; Dominika Przygucka; Marzena Pawlik; Paul Wood; Zbigniew L. Kowalewski
err分享
err收藏
Unravelling enhanced mechanical properties of LENS-manufactured Ti-5553 alloy through interlayer dwell control without post-processing heat treatment通过层间停留时间控制，无需后续热处理，揭示LENS制造的Ti-5553合金的增强力学性能
errJournal of Alloys and Compounds
IF6.3
err2025-08-08
err0
PREAI
errIzabela Mierzejewska; Tomasz Durejko; Anna Antolak-Dudka; Dariusz Zasada; Mateusz Kopec
err分享
err收藏
The effect of multilevel spherical triggers on the crashworthiness capacity of thin-walled structures多级球形触发器对薄壁结构抗撞性能的影响
errAEROSPACE SCIENCE AND TECHNOLOGY
IF5.8
err2025-06-13
err0
PREAI
errRogala, M; Ferdynus, M; Kopec, M
err分享
err收藏
Fractography of Haynes 282 alloy manufactured by DMLS after tensile and HCF拉伸和HCF后DMLS制造的Haynes 282合金的断口形貌
errJOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
IF4.3
err2025-06-06
err0
PREAI
errMacek, Wojciech; Sitek, Ryszard; Podulka, Przemyslaw; Lesiuk, Grzegorz; Zhu, Shun-Peng; Liu, Xiaochuan; Kopec, Mateusz
err分享
err收藏
A high throughput in-situ measurement of heat transfer in successive non-isothermal forming of sheet alloys
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-11-01
err1
errOAAI
errLiu, Xiaochuan; Jin, Shaomeng; Ming, Ming; Fan, Chuanwei; Liu, Heli; Politis, Denis J.; Kopec, Mateusz
err分享
err收藏
Entire fracture surface topography parameters for fatigue life assessment of 10H2M steel
errJOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
IF4.3
err2024-10-01
err11
PREAI
errMacek, Wojciech; Kopec, Mateusz; Laska, Aleksandra; Kowalewski, Zbigniew L.
err分享
err收藏
Digital image correlation approach for low-cycle fatigue life monitoring of 13HMF power engineering steel
errOPTICS AND LASERS IN ENGINEERING
IF3.7
err2024-10-01
err0
errOAAI
errKopec, Mateusz
err分享
err收藏
High-temperature oxidation behaviour of additively manufactured and wrought HAYNES 282
errJOURNAL OF MATERIALS SCIENCE
IF3.9
err2024-09-12
err0
errOAAI
errKopec, Mateusz; Mierzejewska, Izabela; Gorniewicz, Dominika; Sitek, Ryszard; Jozwiak, Stanislaw
err分享
err收藏
Fracture surface topography measurements analysis of low-alloyed corrosion resistant steel after bending-torsion fatigue tests
errPRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
IF3.7
err2024-08-01
err4
PREAI
errPodulka, Przemyslaw; Macek, Wojciech; Zima, Beata; Kopec, Mateusz; Branco, Ricardo; Achtelik, Henryk
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
S
Shun‐Peng Zhu
H 指数: 68 · 论文数: 321
J
Jianguo Lin
H 指数: 61 · 论文数: 579
B
Bin Wang
H 指数: 48 · 论文数: 241
刘刚 封面图
刘刚 (Gang Liu)
H 指数: 37 · 论文数: 497
Y
Yaoqi Wang
H 指数: 37 · 论文数: 266
查看更多