A.F. Yetim - Publications, H-index & Citations

A.F. Yetim

mechanical engineering

33H指数

87论文数

2.8K被引数

收录论文 51

发表时间

Tribological Behavior of Composites Obtained by Infiltrating Ti3C2 MXene-Reinforced Epoxy into Ti6Al4V Metal Matrices Fabricated via Metal Additive Manufacturing under Various Environments 通过将Ti3C2 MXene增强环氧树脂浸渗到通过金属增材制造制备的Ti6Al4V金属基体中获得的复合材料的摩擦学行为研究不同环境下的情况

International Journal of Precision Engineering and Manufacturing

IF3.6

2026-03-16

OAAI

Kerem Turalioglu; Tuba Yetim; Ali Fatih Yetim

Influence of processing parameters and testing temperatures on thermomechanical coupling properties of additively manufactured Ti6Al4V-ELI auxetic structures: experimental and numerical study 加工参数和测试温度对增材制造Ti6Al4V-ELI负泊松比结构热机械耦合性能的影响：实验与数值研究

Smart Materials and Structures

IF3.8

2026-01-02

PREAI

Kemal Solak; Hilmi Tekdir; Suleyman Nazif Orhan; Ali Fatih Yetim

Fatigue performance of additively manufactured gyroid and diamond lattice structures with varying porosities 增材制造的多孔结构（gyroid和diamond晶格结构）在不同孔隙率下的疲劳性能

The International Journal of Advanced Manufacturing Technology

IF0

2025-09-09

PREAI

Gürkan Kaya; Fatih Yıldız; İsmail Hakkı Korkmaz; Ali Fatih Yetim; İrfan Kaymaz

The Effect of Constant and Variable Temperatures on Fatigue Behavior of Ti6Al4V-ELI Alloy Produced by Laser Powder Bed Fusion Additive Manufacturing 激光粉末床熔融增材制造生产的Ti6Al4V-ELI合金在恒定和变化温度下的疲劳行为研究

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2025-05-08

PREAI

H. Tekdir; A. F. Yetim; F. Yıldız; I. Kaymaz; I. H. Korkmaz

Enhancing high cycle fatigue performance of plasma nitrided AISI 4140 steel by post-aging treatment and direct current magnetic field

MATERIALS TODAY COMMUNICATIONS

IF4.5

2024-08-01

PREAI

Yetim, A. F.; Kovaci, H.; Tekdir, H.; Kavasoglu, Y. Secer; Bozkurt, Y. B.; Celik, A.

The effect of doping different amounts of boron on the corrosion resistance and biocompatibility of TiO2 nanotubes synthesized on SLM Ti6Al4V samples 掺杂不同量的硼对在SLM Ti6Al4V样品上合成的TiO2纳米管的耐腐蚀性和生物相容性的影响

SURFACES AND INTERFACES

IF6.3

2024-07-01

PREAI

Acar, M. T.; Comakli, O.; Yazici, M.; Arslan, M. E.; Yetim, A. F.; Celik, A.

Effects of process parameters on selective laser melting of Ti6Al4V-ELI alloy and parameter optimization via response surface method

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2023-10-01

PREAI

Kaya, Gurkan; Yildiz, Fatih; Korkmaz, Ismail Hakki; Kaymaz, Irfan; Yetim, Ali Fatih; Ergueder, Tevfik Oguzhan; Sen, Cagdas

Investigation of mechanical, tribological and magnetic properties after plasma nitriding of AISI 316L stainless steel produced with different orientations angles by selective laser melting

SURFACE & COATINGS TECHNOLOGY

IF6.1

2023-08-01

PREAI

Yazici, Mustafa; Comakli, Onur; Yetim, Tuba; Yetim, Ali Fatih; Celik, Ayhan

Experimental and numerical study on a novel fanless air-to-air solar thermoelectric refrigerator equipped with boosted heat exchanger

RENEWABLE ENERGY

IF9.1

2023-05-01

PREAI

Afshari, Faraz; Mandev, Emre; Muratcobanoglu, Burak; Yetim, Ali Fatih; Ceviz, Mehmet Akif

A comprehensive study on the fatigue properties of duplex surface treated Ti6Al4V by plasma nitriding and DLC coating

SURFACE & COATINGS TECHNOLOGY

IF6.1

2023-04-01

PREAI

Yetim, A. F.; Kovaci, H.; Uzun, Y.; Tekdir, H.; Celik, A.

Effect of bilayer numbers on structural, mechanical, tribological and corrosion properties of TiO2-SiO2 multilayer film-coated β-type Ti45Nb alloys

CERAMICS INTERNATIONAL

IF5.6

2023-01-01

PREAI

Comakli, Onur; Yazici, Mustafa; Demir, Merve; Yetim, Ali Fatih; Celik, Ayhan

Synthesis and characterization of wear and corrosion resistant Ni-doped Al2O3 nanocomposite ceramic coatings by sol-gel method

SURFACE & COATINGS TECHNOLOGY

IF6.1

2022-08-01

PREAI

Yetim, Tuba; Turalioglu, Kerem; Taftali, Merve; Tekdir, Hilmi; Kovaci, Halim; Yetim, Ali Fatih

Tribocorrosion properties and mechanism of a shot peened AISI 4140 low-alloy steel

SURFACE & COATINGS TECHNOLOGY

IF6.1

2022-06-01

PREAI

Bozkurt, Y. B.; Kovaci, H.; Yetim, A. F.; celik, A.

Corrosion Properties of Ceramic-Based TiO2 Films on Plasma Oxidized Ti6Al4V/316L Layered Implant Structured Manufactured by Selective Laser Melting 选择性激光熔化制备的等离子氧化Ti6Al4V/316L层状植入物上陶瓷基TiO2薄膜的腐蚀性能

JOURNAL OF BIONIC ENGINEERING

IF5.8

2021-08-03

PREAI

Tekdir, Hilmi; Yetim, Tuba; Yetim, Ali Fatih

Improvements in the static/dynamic strength of porcelain fused to metal dental crowns with surface protrusions produced by selective laser melting

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2021-05-01

PREAI

Taftali, Merve; Turalioglu, Kerem; Yetim, A. Fatih; Uzun, Yakup; Akpinar, Salih; Yildiz, Fatih

Corrosion and tribocorrosion properties of duplex surface treatments consisting of plasma nitriding and DLC coating

TRIBOLOGY INTERNATIONAL

IF6.9

2021-04-01

PREAI

Kovaci, H.; Bozkurt, Y. B.; Yetim, A. F.; Baran, O.; Celik, A.

Additive manufacturing of multiple layered materials (Ti6Al4V/316L) and improving their tribological properties with glow discharge surface modification

VACUUM

IF3.9

2021-02-01

PREAI

Tekdir, H.; Yetim, A. F.

The tribological and corrosion properties of anodized Ti6Al4V/316L bimetallic structures manufactured by additive manufacturing

SURFACE & COATINGS TECHNOLOGY

IF6.1

2021-01-01

PREAI

Turalioglu, K.; Taftali, M.; Tekdir, H.; Comakli, O.; Yazici, M.; Yetim, T.; Yetim, A. F.

Improving structural, tribological and electrochemical properties of Ti6Al4V alloy with B-doped TiO2 thin films

TRIBOLOGY INTERNATIONAL

IF6.9

2020-06-01

PREAI

Celik, A.; Acar, M. T.; Yetim, T.; Kovaci, H.; Yetim, A. F.

The effect of surface plastic deformation produced by shot peening on corrosion behavior of a low-alloy steel 喷丸表面塑性变形对低合金钢腐蚀行为的影响

SURFACE & COATINGS TECHNOLOGY

IF6.1

2019-02-01

PREAI

Kovaci, H.; Bozkurt, Y. B.; Yetim, A. F.; Aslan, M.; Celik, A.

研究方向