logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
H

Hamid Reza Karimi

Khorramshahr University of Marine Science and Technology

27H指数
72论文数
1.8K被引数
收录论文 44
发表时间
logo
Morphology-based mechanical degradation model for failure behavior of surface-pitted 6061 aluminum using experimental and finite element analysis基于形态的机械降解模型：利用实验和有限元分析研究表面腐蚀坑6061铝合金的失效行为
errResults in Engineering
IF7.9
err2026-09-10
err0
errOAAI
errReza AleAli; Hamid Reza Karimi; Iman Danaee; Murtadha A. Jabbar
err分享
err收藏
Reinforcement learning driven adaptive graph construction for fault diagnosis of chemical processes强化学习驱动的自适应图构建方法在化工过程故障诊断中的应用
errReliability Engineering & System Safety
IF11
err2025-10-22
err0
PREAI
errCaibo Dong; Dazi Li; Hamid Reza Karimi
err分享
err收藏
Dual-actuator-type active noise control in vibro-acoustic systems with openings带开口的振动声学系统中的双执行器式主动噪声控制
errScientific Reports
IF3.9
err2025-09-02
err0
errOAAI
errKhaled Said Ahmed Maamoun; Chung Kwan Lai; Stanislaw Wrona; Marek Pawelczyk; Hamid Reza Karimi
err分享
err收藏
Mechanical characteristics of interpenetrating phase composites (IPCs) made of 3D-printed polylactic-acid scaffolds and epoxy resin matrix, the effect of infill pattern and density由3D打印聚乳酸支架和环氧树脂基体构成的互穿相复合材料(IPCs)的机械特性，以及填充模式和密度的效应
errResults in Engineering
IF7.9
err2025-08-31
err0
errOAAI
errReza Ale Ali; Hamid Reza Karimi
err分享
err收藏
Shear strength and shear energy measurement of brittle materials using two novel disc and beam shape configurations under asymmetrical three-point bend loading脆性材料在不对称三点弯曲加载下，利用两种新型圆盘和梁形构型进行剪切强度和剪切能量测量
errConstruction and Building Materials
IF8
err2025-08-15
err0
PREAI
errHamid Reza Karimi; M.R.M. Aliha; Amir Mousavi; S.M.N. Ghoreishi; T. Sadowski
err分享
err收藏
Tensile behavior of strain-hardening cementitious composites in elastic, ultimate, and rupture stages, experimental investigation on the accuracy of testing methods应变硬化水泥基复合材料的拉伸行为（包括弹性阶段、极限阶段和断裂阶段）及其测试方法准确性的实验研究
errResults in Engineering
IF7.9
err2025-08-08
err0
PREAI
errHamid Reza Karimi
err分享
err收藏
Detection and adsorption of cefixime and methylene blue in aqueous solution by using hydroxyl-functionalized MOF nanostructure MIL-101通过使用羟基功能化的MOF纳米结构MIL-101，在水溶液中对头孢克肟和亚甲蓝进行检测和吸附。
errmaterials science materials in engineering
IF0
err2025-06-23
err0
PREAI
errMilad Mosallanezhad; Reza Farahmand; Ali Reza Solaimany Nazar; Mehrdad Farhadian; Hamid Reza Karimi
err分享
err收藏
Effect of curing condition on mode-I and mode-II cracking resistance of glass fiber reinforced concrete and their relations with tensile and compressive strengths
errSTRUCTURAL CONCRETE
IF3.3
err2025-02-05
err0
PREAI
errEkramian, Soroush; Karamzadeh, Nima Shahni; Bakhtiari, Morteza; Karimi, Hamid Reza
err分享
err收藏
The effect of non-singular term (T-stress) on mode I/III cracking parameters of brittle materials, Numerical and experimental study using different beam and disc shape specimens made of marble rock
errFORCES IN MECHANICS
IF3.5
err2025-02-01
err1
errOAAI
errMousavi, Amir; Aliha, M. R. M.; Khoramishad, Hadi; Karimi, Hamid Reza
err分享
err收藏
Effect of length-to-height ratio on fracture properties of asymmetrical single-edge notched beam (ASENB) specimen made of ceramic under full range mixed mode I/II loading state
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2024-12-01
err1
PREAI
errQiong, Tang; Isleem, Haytham F.; Karimi, Hamid Reza
err分享
err收藏
PLA-based additively manufactured samples with different infill percentages under freeze-thaw cycles; mechanical, cracking, and microstructure characteristics
errTHEORETICAL AND APPLIED MECHANICS LETTERS
IF3.3
err2024-11-01
err1
errOAAI
errAli, Reza Ale; Karimi, Hamid Reza; Mohamadi, Razie
err分享
err收藏
Cementitious composites in aquatic environments, evaluation of fracture and mechanical behavior in long-term submerging in fresh and saltwater, and simulated splash zone conditions
errCASE STUDIES IN CONSTRUCTION MATERIALS
IF6.6
err2024-07-01
err14
errOAAI
errShabakhty, Naser; Karimi, Hamid Reza; Bakhtiary, Abbas Yeganeh
err分享
err收藏
An investigation on the application of acrylic resin agent for fiber/ matrix bond strengthening in green engineered cementitious composites (ECC)
errCASE STUDIES IN CONSTRUCTION MATERIALS
IF6.6
err2024-07-01
err3
errOAAI
errKaramzadeh, Nima Shahni; Karimi, Hamid Reza; Khedri, Ehsan
err分享
err收藏
Effect of short to long hybrid elastic/hyperelastic (Glass/PP) fibers on high-strength engineered cementitious composites (ECC), along with presenting a constitutive model
errJOURNAL OF BUILDING ENGINEERING
IF7.4
err2024-07-01
err9
PREAI
errShabakhty, Naser; Karimi, Hamid Reza; Bakhtiary, Abbas Yeganeh
err分享
err收藏
Tensile, flexural, and mode-I cracking behavior of interpenetrating phase composites (IPC), developed using additively manufactured PLA-based structures with different infill densities and epoxy resin polymer as matrix
errRESULTS IN ENGINEERING
IF7.9
err2024-06-01
err8
errOAAI
errKhedri, Ehsan; Karimi, Hamid Reza; Aliha, M. R. M.; Nazemzadeh, Nogol; Talebi, Behnam; Aleali, Reza
err分享
err收藏
Mode I/II cracking behavior of additively manufactured interpenetrating phase composites (IPC), an experimental and theoretical study
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2024-06-01
err7
PREAI
errKarimi, Hamid Reza; Khedri, Ehsan; Mousavi, Amir; Taherifar, Amirhesam; Abdoli, Zahrae; Mohamadi, Razie
err分享
err收藏
Cracking resistance of crumb rubber modified green asphalt mixtures, using calcium carbonate nanoparticles and two by-product wax-based warm mix additives
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2024-04-01
err6
PREAI
errBazoobandi, Payam; Mousavi, Seyed Roohollah; Karimi, Farman; Karimi, Hamid Reza; Ghasri, Mehdi; Aliha, M. R. M.
err分享
err收藏
Evaluation of wind-induced turbulence around offshore platforms in different wind speeds and directions, along with safety assessment of helicopter operation and helideck's air-gap optimization
errRESULTS IN ENGINEERING
IF7.9
err2024-03-01
err5
errOAAI
errKarimi, Hamid Reza; Shabakhty, Naser
err分享
err收藏
Statistical evaluation of fracture and mechanical performance of engineered cementitious composites (ECC), containing different percentages of glass, polypropylene, polyvinyl-alcohol fibers, and fly ash
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2024-02-01
err22
PREAI
errShabakhty, Naser; Karimi, Hamid Reza; Bakhtiary, Abbas Yeganeh
err分享
err收藏
Effect of support friction on pure mode I, II, and III fracture toughness of cement concrete tested with edge-notched disc bend specimen支撑摩擦对用边缘缺口圆盘弯曲试样测试的水泥混凝土的纯模式I，II和III断裂韧性的影响
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2024-02-01
err25
PREAI
errBakhshizadeh, M.; Pirmohammad, S.; Karimi, H. R.; Aliha, M. R. M.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
M
Mohammad Reza Ganjali
H 指数: 91 · 论文数: 1.4K
M
Mohammad Reza Saeb
H 指数: 89 · 论文数: 633
V
Vahid Vatanpour
H 指数: 83 · 论文数: 385
A
Ali Maleki
H 指数: 82 · 论文数: 638
T
Toraj Mohammadi
H 指数: 80 · 论文数: 501
查看更多