Carlos García-Mateo - Publications, H-index & Citations

Carlos García-Mateo

National Center for Metallurgical Research

52H指数

218论文数

8.8K被引数

收录论文 74

发表时间

The role of prior austenite grain size in the kinetics and morphology of carbide-free bainite 奥氏体晶粒尺寸在无碳化物贝氏体动力学和形态中的作用

Journal of Materials Research and Technology-JMR&T

IF6.6

2026-07-02

OAAI

Mattia Franceschi; Jose A. Jimenez; Daniel dos Santos Avila; Carlos Garcia-Mateo

Multi-step phase transformations in a medium carbon steel with large prior austenite grain size 中碳钢中粗大奥氏体晶粒尺寸下的多步相变

Journal of Materials Research and Technology

IF6.6

2026-05-29

OAAI

Ehsan Tolouei; Simin Dourandish; Carlos Garcia-Mateo; Mohammad Jahazi

Effect of Double Annealing on the Microstructure and Mechanical Properties of a Medium Manganese Steel 双重退火对中锰钢微观结构和力学性能的影响

Steel Research International

IF2.5

2026-03-01

PREAI

Franceschi, Mattia; Jimenez, Jose A.; Garcia-Mateo, Carlos; Rana, Radhakanta

Influence of bainitic transformation temperature on microstructure evolution during isothermal holding and subsequent cooling 贝氏体转变温度对等温保持及后续冷却过程中微观结构演化的影响

Materials Chemistry and Physics

IF4.7

2025-07-07

PREAI

Ehsan Tolouei; Mohammad Saadati; Jean-Benoit Morin; Carlos Garcia-Mateo; Mohammad Jahazi

Study of bainite and martensite tempering in a medium C high Si steel. microstructural disparities and equilibrium convergence 中C高Si钢贝氏体和马氏体回火的研究 [j].微观结构差异与均衡收敛

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-09-01

OAAI

Franceschi, Mattia; Morales-Rivas, Lucia; Cordova-Tapia, Erick; Jimenez, Jose A.; Dabala, Manuele; Garcia-Mateo, Carlos

Effect of prior martensite on bainitic transformation of high Si hypereutectoid steel 马氏体对高Si过共析钢贝氏体转变的影响

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-05-01

OAAI

Garcia-Mateo, Carlos; Sourmail, Thomas; Philippot, Amandine; Morales-Rivas, Lucia; Jimenez, Jose A.

Effect of prior martensite formation on the bainite transformation kinetics in high-strength 3% Mn multiphase steel

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

IF3.1

2022-11-25

OAAI

Morawiec, M.; Skowronek, A.; Kozlowska, A.; Garcia-Mateo, C.; Grajcar, A.

Effect of Mn on the chemical driving force and bainite transformation kinetics in medium-manganese alloys

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

IF3.1

2022-10-06

OAAI

Morawiec, M.; Opara, J.; Garcia-Mateo, C.; Jimenez, J. A.; Grajcar, A.

Bainite plate thickness reduction and microstructure tailoring by double austempering of Al-rich 3Mn steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-09-01

OAAI

Skowronek, Adam; Cordova-Tapia, Erick; Tobajas-Balsera, Pilar; Garcia-Mateo, Carlos; Jimenez, Jose A.; Petrov, Roumen; Grajcar, Adam

Study of the isothermal bainitic transformation and austenite stability in an advanced Al-rich medium-Mn steel

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING

IF4.4

2022-07-04

OAAI

Morawiec, M.; Ruiz-Jimenez, V.; Garcia-Mateo, C.; Jimenez, J. A.; Grajcar, A.

Effect of the ausforming deformation mode on bainitic transformation in a medium carbon high silicon steel

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2022-05-01

OAAI

Eres-Castellanos, Adriana; Zorgani, Muftah; Shahriari, Davood; Romanica, Radu; Antonio Jimenez, Jose; Garcia-Mateo, Carlos; Jahazi, Mohammad

Modelling the formation of austenite in the intercritical interval in ductile iron

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2022-01-01

OAAI

Machado, Harold D.; Toda-Caraballo, Isaac; Garcia-Mateo, Carlos; Aristizabal-Sierra, Ricardo

Microstructural evolution during tempering of an ausformed carbide-free low temperature bainitic steel

MATERIALS & DESIGN

IF7.9

2021-11-01

OAAI

Zorgani, M.; Garcia-Mateo, C.; Jahazi, M.

Bainitic Ferrite Plate Thickness Evolution in Two Nanostructured Steels 两种纳米结构钢的贝氏体铁素体板厚演变

MATERIALS

IF3.2

2021-08-03

OAAI

Ruiz-Jimenez, Victor; Jimenez, Jose A.; Caballero, Francisca G.; Garcia-Mateo, Carlos

The role of plastic strains on variant selection in ausformed bainitic microstructures studied by finite elements and crystal plasticity simulations 通过有限元和晶体塑性模拟研究塑性应变对奥氏体贝氏体组织中变体选择的作用

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2021-07-01

OAAI

Eres-Castellanos, Adriana; Hidalgo, Javier; Morales-Rivas, Lucia; Caballero, Francisca G.; Garcia-Mateo, Carlos

Effects of ausforming temperature on carbide-free bainite transformation and its correlation to the transformation plasticity strain in a medium C-Si-rich steel 成形温度对中富c-si钢无碳化物贝氏体相变的影响及其与相变塑性应变的关系

MATERIALS CHARACTERIZATION

IF5.5

2021-06-01

OAAI

Zorgani, M.; Garcia-Mateo, C.; Jahazi, M.

Explaining the dilatometric behavior during bainite transformation under the effect of variant selection 在变体选择的影响下解释贝氏体转变过程中的膨胀行为

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2021-05-01

OAAI

Eres-Castellanos, Adriana; Morales-Rivas, Lucia; Caballero, Francisca G.; Garcia-Mateo, Carlos

Low-carbon cast microalloyed steel intercritically heat-treated at different temperatures: microstructure and mechanical properties 低碳铸造微合金钢在不同温度下的临界热处理: 微观结构和力学性能

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING

IF4.4

2021-04-17

OAAI

Torkamani, Hadi; Raygan, Shahram; Garcia Mateo, Carlos; Palizdar, Yahya; Rassizadehghani, Jafar; Vivas, Javier; San-Martin, David

Wear behavior of nanostructured carbo- austempered cast steels under rolling-sliding conditions

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2021-03-01

OAAI

Rios-Diez, Oscar; Aristizabal-Sierra, Ricardo; Serna-Giraldo, Claudia; Eres-Castellanos, Adriana; Garcia-Mateo, Carlos

Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach 评估三种无碳化物贝氏体钢的比例影响因素: 一种互补的理论和实验方法

MATERIALS & DESIGN

IF7.9

2021-01-01

OAAI

Eres-Castellanos, Adriana; Hidalgo, Javier; Zorgani, Muftah; Jahazi, Mohammad; Toda-Caraballo, Isaac; Caballero, Francisca G.; Garcia-Mateo, Carlos

研究方向