Jan Mayén - Publications, H-index & Citations

Jan Mayén

secihti–ciateq a.c.

13H指数

57论文数

766被引数

收录论文 20

发表时间

Solution + Artificial Aging Post-Welding Heat Treatment Partially Restores the Microstructure of GMAW AA6061-T6: A Comparative Optical Microscopy Study 固溶 + 人工时效焊后热处理部分恢复 GMAW AA6061-T6 的显微结构：一项比较光学显微镜研究

Microscopy and Microanalysis

IF3

2026-07-27

OAAI

Victor H Mercado-Lemus; Miguel Pérez-Gaytán; Jan Mayén; Hugo Arcos-Gutiérrez; Isaías E Garduño-Olvera; Rocio Maricela Ochoa-Palacios; Gerardo Altamirano-Guerrero; Juan C Díaz-Guillén; José A Betancourt-Cantera; Maricruz Hernández-Hernández

Influence of Oxidative and Hydrothermal Pre-Treatments on KOH Activation of Coconut Fiber for Enhanced Supercapacitor Performance 氧化和水热预处理的椰子纤维KOH活化对超级电容器性能的影响

Materials

IF3.2

2026-07-02

OAAI

Eduardo Tovar-Martínez; Isabel Pereyra; Miguel Ángel González-López; María Guadalupe Navarro-Rojero; Jan Mayen; Mayra del Ángel-Monroy

Optimization of Metallic Support Geometry for Automotive Doors Using CAD, CAE, and Taguchi Method to Improve Structural Rigidity 利用CAD、CAE和Taguchi方法优化汽车门金属支撑结构几何形状以提高结构刚度

ENG

IF2.4

2025-12-11

OAAI

Guzman-Siles, Abigail; Tovar-Martinez, Eduardo; Navarro-Rojero, Maria Guadalupe; Mercado-Lemus, Victor Hugo; Betancourt-Cantera, Jose Antonio; Pereyra, Isabel; Gonzalez-Lopez, Miguel Angel; Mayen-Chaires, Jan; Garduno, Isaias E.; Del Angel-Monroy, Mayra

Enhancing Injection Molding Process by Implementing Cavity Pressure Sensors and an Iterative Learning Control (ILC) Methodology 通过实施模腔压力传感器和迭代学习控制（ILC）方法，提升注塑成型工艺

Processes 2025, Vol. 13, Page 3010

IF2.8

2025-10-01

OAAI

Diana Angélica García-Sánchez; Jan Mayén Chaires; Hugo Arcos-Gutiérrez; Isaías E. Garduño; Maria Guadalupe Navarro-Rojero; Adriana Gallegos-Melgar; José Antonio Betancourt-Cantera; Maricruz Hernández-Hernández; Victor Hugo Mercado-Lemus

Descriptive and inferential study of hardness, fatigue life, and crack propagation on PLA 3D-printed parts PLA 3d打印零件的硬度，乏力寿命和裂纹扩展的描述性和推论研究

MATERIALS TODAY COMMUNICATIONS

IF4.5

2022-08-01

PREAI

Mayen, Jan; Gallegos-Melgar, Adriana Del Carmen; Pereyra, Isa; Poblano-Salas, Carlos A.; Hernandez-Hernandez, Maricruz; Betancourt-Cantera, J. A.; Mercado-Lemus, V. H.; Monroy, Mayra Del Angel

A model for the estimation of CFRP damage accumulation based on the laminate design variables

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

IF0

2022-05-25

PREAI

Abundez-Pliego, Arturo; Oliveros-Riego, Oscar Fernando; Huegel, Joel C.; Alcudia-Zacarias, Enrique; Arellano-Cabrera, Jose Antonio; Mayen, Jan

Innovative negative-stiffness inerter-based mechanical networks

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

IF9.4

2021-09-01

PREAI

Barredo, Eduardo; Lopez Rojas, Gilberto; Mayen, Jan; Flores-Hernandez, A. A.

Structural analysis and magnetic characterization of ternary alloys (Co-Fe-Ni) synthesized by mechanical alloying

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2020-11-01

OAAI

Betancourt-Cantera, L. G.; Sanchez-De Jesus, F.; Bolarin-Miro, A. M.; Gallegos-Melgar, A.; Mayen, Jan; Betancourt-Cantera, J. A.

A novel high-performance passive non-traditional inerter-based dynamic vibration absorber

JOURNAL OF SOUND AND VIBRATION

IF4.9

2020-10-01

PREAI

Barredo, Eduardo; Larios, J. G. Mendoza; Colin, Jorge; Mayen, Jan; Flores-Hernandez, A. . A. .; Arias-Montiel, M.

Hydrogen embrittlement suscetibility on X-120 microalloyed steel as function of tempering temperature

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

IF8.3

2020-03-01

PREAI

Villalobos, Julio C.; Del-Pozo, Adrian; Mayen, Jan; Serna, Sergio; Campillo, Bernardo

Electrochemical Performance of Fe40Al-X (X = Cr, Ti, Co, Ni) Alloys Exposed to Artificial Saliva

MATERIALS

IF3.2

2020-03-01

OAAI

Dinorah Arrieta-Gonzalez, Cinthya; Ademar Rodriguez-Diaz, Roberto; Mayen, Jan; Fernando Retes-Mantilla, Rogel; Teresa Torres-Mancera, Maria; Adlih Oros-Mendez, Lya; Cruz-Mejia, Hector; Starlin Flores-Garcia, Nestor; Porcayo-Calderon, Jesus

Optimal design for high-performance passive dynamic vibration absorbers under random vibration

ENGINEERING STRUCTURES

IF6.4

2019-09-01

PREAI

Barredo, Eduardo; Mendoza Larios, G.; Mayen, Jan; Flores-Hernandez, A. A.; Colin, Jorge; Arias Montiel, M.

Electrophoretic Deposition of Chitosan Films Doped with Nd2Ti2O7 Nanoparticles as Protective Coatings against Corrosion in Saline Solutions

international journal of mining science and technology

IF4.4

2019-03-17

OAAI

Martinez-Gomez, M.; Quinto-Hernandez, A.; Flores-Garcia, N. S.; Mayen, Jan; Dominguez-Diaz, M.; Martinez, H.; Porcayo-Calderon, J.; Gonzalez-Rodriguez, J. G.; Martinez-Gomez, L.

Closed-form solutions for the optimal design of inerter-based dynamic vibration absorbers

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

IF9.4

2018-08-01

103

PREAI

Barredo, Eduardo; Blanco, Andres; Colin, Jorge; Penagos, Victor M.; Abundez, Arturo; Gerardo Vela, Luis; Meza, Virgilio; Cruz, Roller H.; Mayen, Jan

Part 1: Design and development of new sustainable coatings applied on aluminium 6061 alloy-RRA heat treated for engineering applications

SURFACE & COATINGS TECHNOLOGY

IF6.1

2017-11-01

PREAI

Mayen, Jan; Abundez, Arturo; Porcayo-Calderon, Jesus; Pereyra, Isa; Serna, Sergio; Puente-Lee, Ivan; Manuel Salinas-Bravo, Victor; Torres-Islas, Alvaro

A novel methodology for the angular position identification of the unbalance force on asymmetric rotors by response polar plot analysis

MECHANICAL SYSTEMS AND SIGNAL PROCESSING

IF8.9

2017-10-01

PREAI

Colin Ocampo, Jorge; Wing, Enrique S. Gutierrez; Ramirez Moroyoqui, Felix J.; Abundez Pliego, Arturo; Blanco Ortega, Andres; Mayen, Jan

Fractographic relation between progressive failure and strain measurement techniques for recently developed configuration of carbon fiber/epoxy laminate

POLYMER TESTING

IF6

2017-02-01

PREAI

Mayen, Jan; Abundez, Arturo; Alcudia, Enrique; Antonio Arellano, Jose; Colin, Jorge; Pereyra, Isa; Puente-Lee, Ivan