logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
S

Sumit Ghosh

University of Oulu

26H指数
104论文数
1.6K被引数
收录论文 59
发表时间
logo
Role of retained austenite morphology and stability in hydrogen-assisted cracking and subsequent arrest behavior in nano-bainitic steelsretained austenite 形貌和稳定性在纳米贝氏体钢中氢致开裂及后续止裂行为中的作用
errInternational Journal of Hydrogen Energy
IF8.3
err2026-06-10
err0
errOAAI
errVirendra Kumar Verma; Motomichi Koyama; Vijay Shankar Sridharan; Eiji Akiyama; Jukka Kömi; Sumit Ghosh
err分享
err收藏
Combined Effect of Silicon Content, Prior Deformation and Partitioning Conditions on Retained Austenite and Mechanical Properties of a Quenched and Partitioned 0.4% C Advanced High-Strength Steel硅含量、预变形及分配条件对0.4% C淬火-分配先进高强度钢中残余奥氏体及力学性能的复合影响
errmaterials science and engineering: a
IF0
err2026-03-27
err0
errOAAI
errZeynab Aalipour; Sumit Ghosh; Pentti Karjalainen; Jukka Kömi; Pasi Suikkanen; Vahid Javaheri
err分享
err收藏
Hydrogen diffusion in 0.2-0.4wt% carbon martensitic and martensitic-austenitic advanced high-strength steels0.2-0.4wt%碳马氏体及马氏体-奥氏体先进高强度钢中的氢扩散
errNext Materials
IF0
err2025-12-01
err0
errOAAI
errAho, Niko; Latypova, Renata; Ghosh, Sumit; Kantanen, Pekka; Somani, Mahesh; Komi, Jukka; Pallaspuro, Sakari
err分享
err收藏
Single-Stage Stirling Cryocooler Performance Analysis Using the Regenerator Temperature Corrected Second Order Method
errHEAT TRANSFER ENGINEERING
IF1.6
err2025-10-01
err0
PREAI
errMohanty, Soumya Ranjan; Ghosh, Sumit; Patel, Kishore Singh; Naik, Bukke Kiran
err分享
err收藏
Static recrystallization characteristics and kinetics of austenitic stainless steels under development for LH2 storage applications奥氏体不锈钢在 LH2 储存应用开发中的静态再结晶特性与动力学
errMaterials & Design
IF7.9
err2025-09-12
err0
errOAAI
errMahesh Somani; Sumit Ghosh; Juha Uusitalo; Frank Hoffmann; Marta Muratori; Ali Smith; Ahmed W. Abdelghany
err分享
err收藏
Towards enhanced fatigue performance of advanced high-strength medium-carbon low-alloy steels: A comparative study between banded ultrafine bainitic and martensitic steels为提高先进高强中碳低合金钢的疲劳性能：带状超细贝氏体钢与马氏体钢的比较研究
errmaterials science materials in engineering
IF0
err2025-09-04
err0
PREAI
errBright Mweene; Sumit Ghosh; Mahesh Somani; Ankur Chauhan
err分享
err收藏
Influence of composition on the constitutive flow behaviour of austenitic stainless steels under development for LH2 storage applications成分对用于LH2储存应用的奥氏体不锈钢的本构流动行为的影响
errmaterials science materials in engineering
IF0
err2025-06-28
err0
errOAAI
errAhmed W. Abdelghany; Sumit Ghosh; Tun Tun Nyo; Ali Smith; Frank Hoffmann; Marta Muratori; Mahesh Somani
err分享
err收藏
Investigation of microstructural evolution and carbon redistribution in ausformed nanostructured bainitic steel via 3D atom probe tomography and its structure-property relationship
errMATERIALIA
IF2.9
err2025-03-01
err0
PREAI
errVerma, Abhinesh; Reza, Shahriar; Ghosh, Sumit; Macha, Nagini; Rakha, Khushboo
err分享
err收藏
Effects of volumetric energy density on defect structure and fatigue behaviour of powder bed fusion manufactured 316L stainless steel体积能量密度对粉末床熔融制造的316L不锈钢的缺陷结构和乏力行为的影响
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2025-03-01
err0
errOAAI
errJaskari, Matias; Hamada, Atef; Allam, Tarek; Dzieciol, Krzysztof; Ghosh, Sumit; Schwaiger, Ruth; Karjalainen, Pentti; Jarvenpaa, Antti
err分享
err收藏
Improving fatigue resistance of ultrafine bainitic steel by exploiting segregation-induced bands
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2024-09-01
err0
PREAI
errMweene, Bright; Ghosh, Sumit; Somani, Mahesh; Chauhan, Ankur
err分享
err收藏
Enhancement of strength in laser-joined Al-TRIP and Si-TRIP steels: Microstructural insights and deformation analysis
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-10-01
err6
errOAAI
errHamada, Atef; Khosravifard, Ali; Ghosh, Sumit; Jaskari, Matias; Kreins, Marion; Abd-Elaziem, Walaa; Wahba, Mohamed; Ahmed, Essam; Allam, Tarek
err分享
err收藏
Micro-mechanisms underlying enhanced fatigue life of additively manufactured 316L stainless steel with a gradient heterogeneous microstructure
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-10-01
err10
PREAI
errGhosh, Sumit; Bibhanshu, Nitish; Suwas, Satyam; Chatterjee, Kaushik
err分享
err收藏
High-stress abrasive wear performance of medium-carbon direct-quenched and partitioned, carbide-free bainitic, and martensitic steels中碳直接淬火和分区的无碳化物贝氏体和马氏体钢的高应力磨料磨损性能
errWEAR
IF6.1
err2023-08-01
err14
errOAAI
errHaiko, Oskari; Pallaspuro, Sakari; Javaheri, Vahid; Kaikkonen, Pentti; Ghosh, Sumit; Valtonen, Kati; Kaijalainen, Antti; Komi, Jukka
err分享
err收藏
Micromechanical analysis and finite element modelling of laser-welded 5-mm-thick dissimilar joints between 316L stainless steel and low-alloyed ultra-high-strength steel
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-08-01
err17
errOAAI
errHamada, Atef; Khosravifard, Ali; Ali, Mohammed; Ghosh, Sumit; Jaskari, Matias; Hietala, Mikko; Jarvenpaa, Antti; Newishy, Mohamed
err分享
err收藏
Rapid tempering of a medium-carbon martensitic steel: In-depth exploration of the microstructure - mechanical property evolution中碳马氏体钢的快速回火: 组织力学性能演变的深入探索
errMATERIALS & DESIGN
IF7.9
err2023-07-01
err5
errOAAI
errJavaheri, Vahid; Pallaspuro, Sakari; Sadeghpour, Saeed; Ghosh, Sumit; Sainio, Johannes; Latypova, Renata; Komi, Jukka
err分享
err收藏
Simultaneous enhancement of mechanical properties and resistance to hydrogen-assisted degradation by multiple precipitation and nano-twinning in medium manganese steel
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2023-06-01
err4
PREAI
errAllam, Tarek; Ali, Mohammed; Guo, Xiaofei; Ghosh, Sumit; Haase, Christian; Jaskari, Matias; Jarvenpaa, Antti; Hamada, Atef
err分享
err收藏
Nanostructured bainite transformation characteristics in medium-carbon steel subjected to ausforming and isothermal holding below martensite start temperature
errJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
IF6.6
err2023-03-01
err8
errOAAI
errKaikkonen, Pentti; Ghosh, Sumit; Somani, Mahesh; Komi, Jukka
err分享
err收藏
Dynamic softening kinetics of Al0.3CoCrFeNi high-entropy alloy during high temperature compression and its correlation with the evolving microstructure and micro-texture
errMATERIALS CHARACTERIZATION
IF5.5
err2023-03-01
err7
errOAAI
errPatnamsetty, Madan; Ghosh, Sumit; Somani, Mahesh C.; Peura, Pasi
err分享
err收藏
Surface nanocrystallization enhances the biomedical performance of additively manufactured stainless steel
errJOURNAL OF MATERIALS CHEMISTRY B
IF5.7
err2023-01-01
err7
PREAI
errGhosh, Sumit; Indrakumar, Sushma; Ghosh, Santanu; Gopal, Vasanth; Nilawar, Sagar; Manivasagam, Geetha; Kesave, Jayanth S.; Suwas, Satyam; Chatterjee, Kaushik
err分享
err收藏
A combined 3D-atomic/nanoscale comprehension and ab initio computation of iron carbide structures tailored in Q&P steels via Si alloying
errNANOSCALE
IF5.1
err2023-01-01
err6
errOAAI
errGhosh, Sumit; Rakha, Khushboo; Devi, Assa Aravindh Sasikala; Reza, Shahriar; Pallaspuro, Sakari; Somani, Mahesh; Huttula, Marko; Koemi, Jukka
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
A
Ajay Singh
H 指数: 101 · 论文数: 3.0K
A
Akihiko Chiba
H 指数: 66 · 论文数: 605
S
Satyam Suwas
H 指数: 63 · 论文数: 569
B
Bikramjit Basu
H 指数: 55 · 论文数: 366
K
Kaushik Chatterjee
H 指数: 54 · 论文数: 315
查看更多