Kubilay Aslantaş - Publications, H-index & Citations

Kubilay Aslantaş

Afyon Kocatepe University

34H指数

145论文数

3.5K被引数

收录论文 44

发表时间

Performance of DLC-Coated Micro-Tools in Micro-Milling of Titanium-Based Biomedical Alloys DLC涂层微工具在钛基生物医学合金微铣削中的性能

International Journal of Precision Engineering and Manufacturing

IF3.6

2026-08-10

PREAI

Kubilay Aslantas; Burak Dikici; Ekrem Oezkaya

Effect of overhang distance and tool geometry on chatter in boring of Ti-6Al-4 V alloy 在Ti-6Al-4V合金镗孔中悬伸距离和刀具几何形状对颤振的影响

Journal of the Brazilian Society of Mechanical Sciences and Engineering

IF2.1

2026-05-06

OAAI

Cetindag, Huseyin Alp; Aslantas, Kubilay; Oezkaya, Ekrem; Cicek, Adem

Characterization of the friction behavior of wrought and hot isostatic pressed laser powder bed fusion Ti6Al4V alloys 锻造和热等静压激光粉末床熔融Ti6Al4V合金的摩擦行为表征

CIRP Journal of Manufacturing Science and Technology

IF5.4

2025-09-16

PREAI

Necati Uçak; Kubilay Aslantas; Adem Çiçek; José Outeiro

Review of chatter control techniques in turning and boring 车削和镗削中颤振控制技术的综述

international journal of advanced manufacturing technology

IF0

2025-08-13

PREAI

Hüseyin Alp Çetindağ; Ekrem Oezkaya; Adem Çiçek; Kubilay Aslantas

In vitro evaluation of bond strength between dental ceramics and titanium frameworks produced by additive and subtractive methods 体外评价增材制造和减材制造方法生产的牙科陶瓷与钛支架之间的粘接强度

BMC ORAL HEALTH

IF3.1

2025-05-22

OAAI

Uz, Nergiz; Isisag, Ozer; Percin, Sevilcan; Aslantas, Kubilay; Kilicli, Volkan

Optimization of Cutting Parameters to Minimize Wall Deformation in Micro-Milling of Thin-Wall Geometries

MICROMACHINES

IF3

2025-03-06

OAAI

Hascelik, Ahmet; Aslantas, Kubilay; Yalcin, Bekir

Investigation of the effects of heat treatment and hot isostatic pressing in micro-drilling of Ti6Al4V alloy fabricated by laser powder bed fusion 热处理和热等静压对激光粉末床熔融Ti6Al4V合金微钻孔的影响研究

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY

IF3.7

2024-12-01

PREAI

Balci, Ahmet; Cicek, Adem; Ucak, Necati; Aslantas, Kubilay

Effect of cutting conditions on tool wear and wear mechanism in micro-milling of additively manufactured titanium alloy 切削条件对增材制造钛合金微铣削刀具磨损及磨损机理的影响

TRIBOLOGY INTERNATIONAL

IF6.9

2024-05-01

PREAI

Aslantas, K.; Hascelik, A.; Ercetin, A.; Danish, Mohd; Alatrushi, Luqman K. H.; Rubaiee, Saeed; Bin Mahfouz, Abdullah

The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2024-04-01

PREAI

Morkavuk, Sezer; Aslantas, Kubilay; Gemi, Lokman; Koklue, Ugur; Yazman, Sakir

Constitutive modelling of Ti6Al4V alloy fabricated by laser powder bed fusion and its application to micro cutting simulation

MECHANICS OF MATERIALS

IF4.1

2023-10-01

PREAI

Ucak, Necati; Cicek, Adem; Outeiro, Jose; Aslantas, Kubilay; Cetin, Baris

Optimization of Machining Parameters to Minimize Cutting Forces and Surface Roughness in Micro-Milling of Mg13Sn Alloy 优化加工参数以最小化微铣削Mg13Sn合金的切削力和表面粗糙度

MICROMACHINES

IF3

2023-08-12

OAAI

Ercetin, Ali; Aslantas, Kubilay; Ozgun, Ozgur; Percin, Mustafa; Chandrashekarappa, Manjunath Patel Gowdru

Optimization of Micro-Drilling of Laminated Aluminum Composite Panel (Al-PE) Using Taguchi Orthogonal Array Design

MATERIALS

IF3.2

2023-06-22

OAAI

Yalcin, Bekir; Yuksel, Ali; Aslantas, Kubilay; Der, Oguzhan; Ercetin, Ali

Comparative Analysis of Minimum Chip Thickness, Surface Quality and Burr Formation in Micro-Milling of Wrought and Selective Laser Melted Ti64

MICROMACHINES

IF3

2023-05-30

OAAI

Karakilinc, Ucan; Ergene, Berkay; Yalcin, Bekir; Aslantas, Kubilay; Ercetin, Ali

A comparative study on the machinability of β-type novel Ti29Nb13Ta4.6Zr (TNTZ) biomedical alloys under micro-milling operation

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2023-04-01

PREAI

Aslantas, Kubilay; Demir, Bilge; Guldibi, Ahmet Serdar; Niinomi, Mitsuo; Dikici, Burak

Effect of Micro-Dimple Geometry on the Tribological Characteristics of Textured Surfaces

LUBRICANTS

IF2.9

2022-11-23

OAAI

Ali, Saood; Kurniawan, Rendi; Moran, Xu; Ahmed, Farooq; Danish, Mohd; Aslantas, Kubilay

Performance evaluation of DLC and NCD coatings in micro-milling of Al7075-T6 alloy

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2022-09-01

PREAI

Aslantas, Kubilay; Hascelik, Ahmet; Cicek, Adem

An experimental investigations on effects of cooling/lubrication conditions in micro milling of additively manufactured Inconel 718

TRIBOLOGY INTERNATIONAL

IF6.9

2022-09-01

PREAI

Danish, Mohd; Aslantas, Kubilay; Hascelik, Ahmet; Rubaiee, Saeed; Gupta, Munish Kumar; Yildirim, Mehmet Bayram; Ahmed, Anas; Bin Mahfouz, Abdullah

Machinability of 3D printed metallic materials fabricated by selective laser melting and electron beam melting: A review

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2022-08-01

PREAI

Ucak, Necati; cicek, Adem; Aslantas, Kubilay

Static Cyclic Fatigue Resistance in Abrupt Curvature, Surface Topography, and Torsional Strength of R-Pilot and ProGlider Glide Path Instruments

JOURNAL OF ENDODONTICS

IF3.6

2021-12-01

PREAI

Keskin, Cangul; Ozdemir, Ozgur S.; Aslantas, Kubilay; Toplu, Defne; Keles, Ali; Inan, Ugur

Measurement of Micro Burr and Slot Widths through Image Processing: Comparison of Manual and Automated Measurements in Micro-Milling

SENSORS

IF3.5

2021-06-28

OAAI

Akkoyun, Fatih; Ercetin, Ali; Aslantas, Kubilay; Pimenov, Danil Yurievich; Giasin, Khaled; Lakshmikanthan, Avinash; Aamir, Muhammad

研究方向