logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Mustafa Özgür Bora

kocaeli university

20H指数
185论文数
2.1K被引数
收录论文 41
发表时间
logo
Thermomechanical Properties of Carbon and Glass Fiber-Reinforced Epoxy Composites as Function of Drilling Parameters碳纤维和玻璃纤维增强环氧复合材料的力学热性能与钻削参数的关系
errPolymers
IF4.9
err2026-09-22
err0
errOAAI
errSatılmış Ürgün; Sinan Fidan; Eser Yarar; Mehmet İskender Özsoy; Mustafa Özgür Bora
err分享
err收藏
Combined Effects of Thermal Cycling Aging and Reinforcement Content on the Ball-On-Disk Wear of Additively Manufactured Polylactic Acid Composites热循环老化与增强体含量对增材制造聚乳酸复合材料球-盘磨损的协同影响
errPolymer Composites
IF4.7
err2026-08-31
err0
errOAAI
errSinan Fidan; Satılmış Ürgün; Nevin Gamze Karsli; Taner Yilmaz; Mustafa Özgür Bora; Mehmet İskender Özsoy
err分享
err收藏
Influence of Thermal Cycling on Friction, Wear, and Damage Evolution of Fused Deposition Modeling of 3D-Printed Glass Fiber Reinforced Polylactic Acid Composites热循环对3D打印玻璃纤维增强聚乳酸复合材料熔融沉积成型件的摩擦、磨损及损伤演化的影响
errPolymer Composites
IF4.7
err2026-08-15
err0
errOAAI
errSinan Fidan; Satılmış Ürgün; Nevin Gamze Karsli; Taner Yılmaz; Mustafa Özgür Bora; Mehmet İskender Özsoy
err分享
err收藏
Geometry-Driven Deformation and Degradation Behavior of Crimped Electrical Connections Under Coupled Environmental and Chemical Loading几何驱动下的压接电气连接在耦合环境与化学载荷作用下的变形与退化行为
errMaterials
IF3.2
err2026-06-01
err0
errOAAI
errCevher Sunguray; Satılmış Ürgün; Sinan Fidan; Mustafa Özgür Bora
err分享
err收藏
Comparison of surface treatment protocols for a 3D-printable resin for definitive crowns: Effects on surface roughness and bonding performance3D打印树脂用于最终牙冠的表面处理方案比较：对表面粗糙度和粘接性能的影响
errJournal of Prosthodontics
IF1.5
err2026-05-29
err0
errOAAI
errEngin Sacu DDS; Mehmet Can Ararat DDS; Sinan Fidan PhD; Satılmış Ürgün PhD; Mustafa Özgür Bora PhD; Neslihan Tekce DDS, PhD
err分享
err收藏
Primer Adhesion on Laser-Textured AA2024-T3: Effects of Texture Geometry via Reciprocating Sliding Tests激光纹理AA2024-T3上的底漆附着力：通过往复滑动测试研究纹理几何形状的影响
errCoatings
IF2.8
err2026-04-29
err0
errOAAI
errÖzer Coşkun; Sinan Fidan; Mustafa Özgür Bora; Satılmış Ürgün; Mehmet İskender Özsoy; Yezen Kandur
err分享
err收藏
Effect of Spraying Distance on the Scratch Wear Behavior of 8YSZ and Gd-Yb-Y Co-Doped ZrO2 TBCs喷涂距离对8YSZ和Gd-Yb-Y共掺杂ZrO2 TBCs划痕磨损行为的影响
errCoatings
IF2.8
err2026-04-06
err0
errOAAI
errAli Haydar Güneş; Sinan Fidan; Şaban Hakan Atapek; Mustafa Özgür Bora; Satılmış Ürgün; Mehmet İskender Özsoy; Sedat İriç; Tuğçe Yayla Yazıcı
err分享
err收藏
Effect of S2-Glass/Epoxy Thickness on Buckling of GLAREs Under Pre-Cyclic Hygrothermal LoadingS2-玻璃/环氧厚度对预循环湿热载荷下GLARE屈曲的影响
errPolymer Composites
IF4.7
err2026-03-05
err0
PREAI
errSedat Süsler; Mustafa Özgür Bora; Cem Uçan; Halit S. Türkmen
err分享
err收藏
Tribological Performance of Glass/Kevlar Hybrid Epoxy Composites: Effects of Pressurized Water-Immersion Aging Under Reciprocating Sliding WearÖzsoy, M.İ.; Bora, M.Ö.; Ürgün, S.; Fidan, S.; Güleç, E. 玻璃/凯夫拉混杂环氧复合材料的摩擦学性能：在往复滑动磨损下受压水浸老化的影响。Polymers 2025, 17, 2944. [Google Scholar] [CrossRef]
errPolymers
IF4.9
err2026-03-03
err0
errOAAI
errMehmet İskender Özsoy; Mustafa Özgür Bora; Satılmış Ürgün; Sinan Fidan; Erman Güleç
err分享
err收藏
Improving the fire resistance of semi-rigid polyurethane foams with cellulose-based layer coatings通过纤维素基层涂层提高半刚性聚氨酯泡沫的耐火性能
errCellulose
IF4.8
err2026-02-24
err0
PREAI
errRoyal Guliyev; Nalan Tekin; Mustafa Özgür Bora; Yavuz Emre Yağcı
err分享
err收藏
Effects of Pressurized Water Aging on Reciprocating Friction and Wear of FDM 3D-Printed PLA and Glass Fiber Reinforced PLA Composites加压水老化对FDM 3d打印PLA和玻璃纤维增强PLA复合材料往复摩擦磨损的影响
errPolymers
IF4.9
err2026-02-05
err0
errOAAI
errSinan Fidan; Satılmış Ürgün; Nevin Gamze Karsli; Taner Yilmaz; Mustafa Özgür Bora; Mehmet İskender Özsoy
err分享
err收藏
Influence of Form Factor on Microstructural, Mechanical and Electrical Properties of Electrically Conductive Polyvinylidene Fluoride Processed by Arburg Plastic Freeforming形状因子对Arburg塑料自由成型加工的导电聚偏氟乙烯的微观结构，机械和电气性能的影响
errPolymers
IF4.9
err2026-01-29
err0
errOAAI
errNurettin Arikan; Kevin Klier; Ibrahim Mutlu; Michael Hartung; Yavuz Emre Yagci; Mustafa Ozgur Bora; Hans-Peter Heim
err分享
err收藏
Validating a Hashin-Based Shell Model for LVI of Woven E-Glass/Epoxy Laminates基于Hashin的壳模型在 woven E-Glass/epoxy 层合板低速冲击（LVI）中的验证
errPolymer Composites
IF4.7
err2026-01-16
err0
PREAI
errMehmet İskender Özsoy; Sinan Fidan; Satılmış Ürgün; Mustafa Özgür Bora; Ender Can Yakar
err分享
err收藏
Tribological Response of Basalt/Carbon Hybrid Laminated Composites After Water-Immersion Aging: Influence of Stacking Sequence Under Reciprocating Wear玄武岩/碳纤维混杂层合复合材料经水浸老化的摩擦学响应：堆叠顺序对往复磨损的影响
errPolymers 2026, Vol. 18, Page 57
IF4.9
err2025-12-26
err0
errOAAI
errSinan Fidan; Satılmış Ürgün; Mehmet İskender Özsoy; Mustafa Özgür Bora; Togayhan Kutluk; Erman Güleç
err分享
err收藏
Tribological Response of Glass Fiber/Polyester Composites After Pressurized Water-Immersion Aging Assessed by Reciprocating and Ball-on-Disc Wear Testing高压水浸老化后玻璃纤维/聚酯复合材料的摩擦学响应评估：通过往复和球盘磨损测试
errPolymers 2025, Vol. 17, Page 2503
IF4.9
err2025-09-21
err0
errOAAI
errSinan Fidan; Satılmış Ürgün; Mehmet İskender Özsoy; Mustafa Özgür Bora; Erman Güleç
err分享
err收藏
Scratch Resistance and Tribological Enhancement of Epoxy Composites Reinforced with Chopped Glass Fiber and Nano Silica Through Taguchi Analysis通过田口分析评价短切玻璃纤维和纳米二氧化硅增强环氧复合材料的耐刮擦性能和摩擦学性能提升
errPolymers 2025, Vol. 17, Page 2550
IF4.9
err2025-09-21
err0
errOAAI
errElanur Ozun; Reyhan Ceylan; Mustafa Özgür Bora; Sinan Fidan; Satılmış Ürgün; Mehmet İskender Özsoy; Erman Güleç
err分享
err收藏
Effect of thermo-mechanical treatments on the structural properties and tribological behavior of precipitation hardenable Cu-4Ti (wt%) alloy热-机械处理对析出硬化Cu-4Ti（wt%）合金的结构性能和摩擦学行为的影响
errTribology International
IF6.9
err2025-09-02
err0
PREAI
errJarosław Konieczny; Krzysztof Labisz; Ş. Hakan Atapek; Sinan Fidan; M. Özgür Bora; Satılmış Ürgün
err分享
err收藏
Determination of upper limits of crack formation in surface hardening of Ti6Al4V by low power fiber laser parameter optimization in air and nitrogen environment通过低功率光纤激光参数优化，在空气和氮气环境中确定Ti6Al4V表面硬化中裂纹形成的上限
erroptics and laser technology
IF0
err2025-08-31
err0
PREAI
errErhan Akman; Mustafa Özgür Bora; Sinan Fidan
err分享
err收藏
Stabilizing effect of sepiolite in the preparation of flame-resistant expanded perlite/semi-rigid polyurethane foam composites在制备阻燃膨胀珍珠岩/半刚性聚氨酯泡沫复合材料中坡缕石(或称海泡石)的稳定化效应
errPolymer International
IF3.6
err2025-07-17
err0
PREAI
errRoyal Guliyev; Nalan Tekin; Mustafa Özgür Bora; Yavuz Emre Yağcı
err分享
err收藏
Effect of laser induced remelting on the scratch behavior of spark plasma sintered nickel aluminide alloy激光诱导重熔对火花等离子烧结镍铝化物合金划痕行为的影响
errMaterials Chemistry and Physics
IF4.7
err2025-06-26
err0
PREAI
errGülşah Aktaş Çelik; Fatih Aksu; F. Betül Yılmaz Güler; Satılmış Ürgün; Sinan Fidan; M. Özgür Bora; Yunus Erbay; Ş. Hakan Atapek
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
T
Tamer Sınmazçelik
H 指数: 25 · 论文数: 215
A
A. Demir
H 指数: 23 · 论文数: 81
E
Egemen Avcu
H 指数: 23 · 论文数: 181
E
Erhan Akman
H 指数: 22 · 论文数: 125
H
Halit S. Türkmen
H 指数: 21 · 论文数: 123
查看更多