А. И. Дмитриев - Publications, H-index & Citations

А. И. Дмитриев

Institute of Strength Physics and Materials Science SB RAS

33H指数

240论文数

3.2K被引数

收录论文 62

发表时间

The Influence of Mixing Modes on Structure Formation and Mechanical Properties of Ti-Al-Fe-O-C Powder Materials During Vacuum Sintering 真空烧结过程中混合模式对Ti-Al-Fe-O-C粉末材料结构形成和力学性能的影响

Journal of Manufacturing and Materials Processing

IF3.3

2026-09-08

OAAI

Elena N. Korosteleva; Kirill O. Akimov; Andrey I. Dmitriev

Investigation of Structure and Property Formation Features in Ni3Al Intermetallic Compound Due to SHS-Compaction SHS-致密化过程中Ni3Al金属间化合物结构与性能形成特征的研究

Journal of Manufacturing and Materials Processing

IF3.3

2026-08-30

OAAI

Kirill O. Akimov; Konstantin V. Ivanov; Andrey I. Dmitriev

Influence of Hot-Pressing Temperature on the Microstructure and Mechanical Properties of LPBF-Manufactured Al-10Sn-10Pb Alloy 热压温度对LPBF制造Al-10Sn-10Pb合金微观结构和力学性能的影响

Journal of Manufacturing and Materials Processing

IF3.3

2026-05-28

OAAI

K. O. Akimov; A. L. Skorentsev; N. M. Rusin; V. E. Liharev; A. Yu. Nikonov; D. P. Il’yashchenko; A. I. Dmitriev

Wear and Friction Reduction on Polyethersulfone Matrix Composites Containing Polytetrafluoroethylene Coated with ZrW2O8 Particles at Elevated Temperatures 聚醚砜基体复合材料在高温下加入聚四氟乙烯涂层ZrW2O8颗粒的磨损和摩擦减少

Lubricants

IF2.9

2026-03-04

OAAI

Andrey I. Dmitriev; Sergei Yu. Tarasov; Dmitry G. Buslovich; Sergey V. Panin; Nikolai L. Savchenko; Lyudmila A. Kornienko; Evgeny Yu. Filatov; Evgeny N. Moskvichev; Dmitry V. Lychagin

Effect of Post-Build Annealing on the Microstructure and Mechanical Properties of LPBF-Processed AlSn10Pb10 Alloy 后处理退火对LPBF处理AlSn10Pb10合金微观结构和力学性能的影响

Journal of Manufacturing and Materials Processing

IF3.3

2026-02-27

OAAI

Kirill O. Akimov; Alexander L. Skorentsev; Nikolay M. Rusin; Vadim E. Likharev; Dmitry P. Ilyashchenko; Andrey I. Dmitriev

Effect of Laser Energy Density During LPBF on the Structure and Mechanical Properties of Al–15Sn–5Pb Alloy 激光能量密度在LPBF过程中对Al–15Sn–5Pb合金结构和力学性能的影响

Materials 2025, Vol. 18, Page 5268

IF3.2

2025-11-21

OAAI

Nikolay M. Rusin; Alexander L. Skorentsev; Kirill O. Akimov; Vadim E. Likharev; Dmitry P. Il’yashchenko; Andrey I. Dmitriev

Influence of laser power during laser powder bed fusion on the structure and properties of Al-40Sn alloy prepared from a mixture of elemental powders

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-01-01

PREAI

Rusin, N. M.; Akimov, K. O.; Skorentsev, A. L.; Dmitriev, A. I.

Effect of N2 to total pressure ratio on the structure, mechanical and tribological properties of magnetron-sputtered Ti-Al-Ta-Si-N coatings

SURFACE & COATINGS TECHNOLOGY

IF6.1

2024-09-01

PREAI

Shugurov, A. R.; Kuzminov, E. D.; Derbin, A. Yu.; Panin, A. V.; Dmitriev, A. I.

Effect of constrained conditions, crystallographic and geometric factors on deformation patterns in FCC single crystals. Molecular dynamics study

COMPUTATIONAL MATERIALS SCIENCE

IF3.3

2024-09-01

PREAI

Lychagin, Dmitry V.; Nikonov, Anton Yu.; Dmitriev, Andrey I.

The effect of Si content on microstructure and mechanical properties of Ti-Al-Ta-Si-N coatings

VACUUM

IF3.9

2023-10-01

PREAI

Shugurov, A. R.; Kuzminov, E. D.; Garanin, Yu. A.; Panin, A. V.; Dmitriev, A. I.

Modeling Wear and Friction Regimes on Ceramic Materials with Positive and Negative Thermal Expansion 对具有正负热膨胀的陶瓷材料的磨损和摩擦状态进行建模

LUBRICANTS

IF2.9

2023-09-21

OAAI

Grigoriev, Aleksandr S.; Shilko, Evgeny V.; Dmitriev, Andrey I.; Tarasov, Sergei Y.

Contribution of Tin to the Strain Hardening of Self-Lubricating Sintered Al-30Sn Alloy and Its Wear Resistance under Dry Friction

MATERIALS

IF3.2

2023-02-05

OAAI

Rusin, Nikolay M.; Skorentsev, Alexander L.; Dmitriev, Andrey I.

Improvement of Mechanical Properties and Adhesion of Ti-Al-Si-N Coatings by Alloying with Ta

LUBRICANTS

IF2.9

2022-08-07

OAAI

Shugurov, Artur R.; Kuzminov, Evgenii D.; Garanin, Yuriy A.; Panin, Alexey, V; Dmitriev, Andrey, I

THE EFFECT OF ELECTRON-BEAM TREATMENT ON THE DEFORMATION BEHAVIOR OF THE EBAM TI-6AL-4V UNDER SCRATCHING

FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING

IF11.8

2022-07-28

OAAI

Shugurov, Artur R.; Nikonov, Anton Y.; Dmitriev, Andrey I.

The effect of ultrasonic impact treatment on deformation and fracture of electron beam additive manufactured Ti-6Al-4V under uniaxial tension 超声冲击处理对电子束增材制造Ti-6Al-4V单轴拉伸变形和断裂的影响

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-01-01

PREAI

Panin, Alexey, V; Kazachenok, Marina S.; Dmitriev, Andrey, I; Nikonov, Anton Yu; Perevalova, Olga B.; Kazantseva, Lyudmila A.; Sinyakova, Elena A.; Martynov, Sergey A.

Tribotechnical Properties of Sintered Antifriction Aluminum-Based Composite under Dry Friction against Steel

MATERIALS

IF3.2

2021-12-27

OAAI

Rusin, Nikolay M.; Skorentsev, Alexander L.; Krinitcyn, Maksim G.; Dmitriev, Andrey I.

Analysis of the Quasi-Static and Dynamic Fracture of the Silica Refractory Using the Mesoscale Discrete Element Modelling

MATERIALS

IF3.2

2021-12-01

OAAI

Grigoriev, Aleksandr S.; Zabolotskiy, Andrey V.; Shilko, Evgeny V.; Dmitriev, Andrey I.; Andreev, Kirill

Characteristic Features of Ultrafine-Grained Ti-45 wt.% Nb Alloy under High Cycle Fatigue

MATERIALS

IF3.2

2021-09-17

OAAI

Mairambekova, Aikol M.; Eroshenko, Anna Y.; Oborin, Vladimir A.; Bannikov, Mikhail, V; Chebodaeva, Valentina V.; Terekhina, Alena, I; Naimark, Oleg B.; Dmitriev, Andrey, I; Sharkeev, Yurii P.

Advances in Laser Additive Manufacturing of Ti-Nb Alloys: From Nanostructured Powders to Bulk Objects Ti-nb合金的激光增材制造进展: 从纳米结构粉末到块状物体

NANOMATERIALS

IF4.3

2021-04-29

OAAI

Khimich, Margarita A.; Prosolov, Konstantin A.; Mishurova, Tatiana; Evsevleev, Sergei; Monforte, Xavier; Teuschl, Andreas H.; Slezak, Paul; Ibragimov, Egor A.; Saprykin, Alexander A.; Kovalevskaya, Zhanna G.; Dmitriev, Andrey I.; Bruno, Giovanni; Sharkeev, Yurii P.

NUMERICAL MODEL OF A LOCAL CONTACT OF A POLYMER NANOCOMPOSITE AND ITS EXPERIMENTAL VALIDATION

FACTA UNIVERSITATIS-SERIES MECHANICAL ENGINEERING

IF11.8

2021-04-01

OAAI

Dmitriev, Andrey, I

研究方向