Antonio J. Sánchez Egea - Publications, H-index & Citations

Antonio J. Sánchez Egea

department of mechanical engineering

22H指数

76论文数

1.2K被引数

收录论文 22

发表时间

Design, manufacture and experimental validation of an electromagnetic device for the vibratory insertion of needles 电磁装置的设计、制造及针对针头振动插入的实验验证

The International Journal of Advanced Manufacturing Technology

IF0

2025-11-25

PREAI

Erick D. Chávez Pereda; Hernán A. González Rojas; Antonio J. Sánchez Egea; Paula Ramos Herrero; Silvia Garcia Vilana

Wire cutting as a viable substitute for machining standardized V-notches for Charpy specimens 线切割作为制备夏比试样标准V型缺口的可行替代方法

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

IF3.1

2025-02-28

OAAI

Spanu, Florencia; Cantero, Mariano; Lorusso, Hernan; Simoncelli, Alejandro; Migliorino, Diego; Krahmer, Daniel Martinez; Egea, Antonio J. Sanchez

Dynamic Modeling of Needle-Tissue Interaction Applied to Soft Tissue Damage During Needle Extraction

IEEE ACCESS

IF3.6

2025-01-01

OAAI

Pereda, Erick D. Chavez; Rojas, Hernan A. Gonzalez; Egea, Antonio J. Sanchez

Mechanical and Chemical Characterisation of TiN and AlTiSiN Coatings on a LPBF Processed IN718 Substrate

MATERIALS

IF3.2

2021-08-17

OAAI

Colombo-Pulgarin, Juan C.; Sanchez Egea, Antonio J.; Celentano, Diego J.; Martinez Krahmer, Daniel; Martynenko, Vitaliy; Lopez de Lacalle, Norberto

Milling force model for asymmetric end-mills during high-feed milling on AISI-P20

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2021-06-29

OAAI

Russo, Diego; Urbicain, Gorka; Sanchez Egea, Antonio J.; Simoncelli, Alejandro; Martinez Krahmer, Daniel

Analysis of the Part Distortions for Inconel 718 SLM: A Case Study on the NIST Test Artifact

MATERIALS

IF3.2

2020-11-11

OAAI

Martinez, Silvia; Ortega, Naiara; Celentano, Diego; Sanchez Egea, Antonio J.; Ukar, Eneko; Lamikiz, A.

Surface Damaging of Brass and Steel Pins when Sliding over Nitrided Samples Cut by Finishing and Roughing EDM Conditions

MATERIALS

IF3.2

2020-07-17

OAAI

Martynenko, Vitaliy; Martinez Krahmer, Daniel; Napoles Alberro, Amelia; Cabo, Amado; Perez, Daniela; Zayas Figueras, Enrique E.; Gonzalez Rojas, Hernan A.; Sanchez Egea, Antonio J.

Dry machinability analyses between free cutting, resulfurized, and carbon steels

MATERIALS AND MANUFACTURING PROCESSES

IF4.7

2020-02-26

OAAI

Martinez Krahmer, D.; Urbicain, G.; Sanchez Egea, A. J.

Estimation of Specific Cutting Energy in an S235 Alloy for Multi-Directional Ultrasonic Vibration-Assisted Machining Using the Finite Element Method

MATERIALS

IF3.2

2020-01-24

OAAI

Florez Garcia, Luis C.; Gonzalez Rojas, Hernan A.; Sanchez Egea, Antonio J.

Bio-Inspired Functional Surface Fabricated by Electrically Assisted Micro-Embossing of AZ31 Magnesium Alloy

MATERIALS

IF3.2

2020-01-16

OAAI

Wang, Xinwei; Xu, Jie; Wang, Chunju; Sanchez Egea, Antonio J.; Li, Jianwei; Liu, Chen; Wang, Zhenlong; Zhang, Tiejun; Guo, Bin; Cao, Jian

Marker-Less Monitoring Protocol to Analyze Biomechanical Joint Metrics During Pedaling

IEEE ACCESS

IF3.6

2020-01-01

OAAI

Serrancoli, Gil; Bogatikov, Peter; Huix, Joana Pales; Barbera, Ainoa Forcada; Egea, Antonio J. Sanchez; Ribe, Jordi Torner; Kanaan-Izquierdo, Samir; Susin, Antoni

Angular Velocity Analysis Boosted by Machine Learning for Helping in the Differential Diagnosis of Parkinsons Disease and Essential Tremor

IEEE ACCESS

IF3.6

2020-01-01

OAAI

Loaiza Duque, Julian D.; Sanchez Egea, Antonio J.; Reeb, Theresa; Gonzalez Rojas, Hernan A.; Gonzalez-Vargas, Andres M.

Joining metrics enhancement when combining FSW and ball-burnishing in a 2050 aluminium alloy

SURFACE & COATINGS TECHNOLOGY

IF6.1

2019-06-01

OAAI

Sanchez Egea, A. J.; Rodriguez, A.; Celentano, D.; Callej, A.; Lopez de Lacalle, L. N.

On the microstructure effects when using electropulsing versus furnace treatments while drawing inox 308L

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2019-04-01

OAAI

Sanchez Egea, A. J.; Jorba Peiro, J.; Walter Signorelli, Javier; Gonzalez Rojas, H. A.; Javier Celentano, Diego

Model Based on an Effective Material-Removal Rate to Evaluate Specific Energy Consumption in Grinding

MATERIALS

IF3.2

2019-03-21

OAAI

Napoles Alberro, Amelia; Gonzalez Rojas, Hernan A.; Sanchez Egea, Antonio J.; Hameed, Saqib; Pena Aguilar, Reyna M.

Current-Induced Ductility Enhancement of a Magnesium Alloy AZ31 in Uniaxial Micro-Tension Below 373 K

MATERIALS

IF3.2

2018-12-31

OAAI

Wang, Xinwei; Egea, Antonio J. Sanchez; Xu, Jie; Meng, Xianyu; Wang, Zhenlong; Shan, Debin; Guo, Bin; Cao, Jian

Influence of the Regime of Electropulsing-Assisted Machining on the Plastic Deformation of the Layer Being Cut

MATERIALS

IF3.2

2018-05-25

OAAI

Hameed, Saqib; Gonzalez Rojas, Hernan A.; Perat Benavides, Jose I.; Napoles Alberro, Amelia; Sanchez Egea, Antonio J.

On the Cutting Performance of Segmented Diamond Blades when Dry-Cutting Concrete 干式切割混凝土时分段金刚石刀片的切割性能

MATERIALS

IF3.2

2018-02-09

OAAI

Sanchez Egea, A. J.; Martynenko, V.; Martinez Krahmer, D.; Lopez de Lacalle, L. N.; Benitez, A.; Genovese, G.

A hybrid mixed double-sided incremental forming method for forming Ti6Al4V alloy

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2016-01-01

OAAI

Valoppi, Beatrice; Sanchez Egea, Antonio J.; Zhang, Zixuan; Gonzalez Rojas, Hernan A.; Ghiotti, Andrea; Bruschi, Stefania; Cao, Jian

Mechanical and metallurgical changes on 308L wires drawn by electropulses

MATERIALS & DESIGN

IF7.9

2016-01-01

PREAI

Sanchez Egea, Antonio J.; Gonzalez Rojas, Hernan A.; Celentano, Diego J.; Jorba Peiro, Jordi

研究方向