M.W. Joosten

Deakin University

H指数:17

被引数:804

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Extension of scaled boundary finite element method for delamination simulations in laminated composites under three-dimensional framework

在三维框架下扩展边界有限元法用于层合复合材料分层模拟

International Journal of Solids and Structures

IF3.8

2026-09-290

PRE

Joint scaling of cohesive strength and CF22 fatigue parameters for accelerated fatigue cohesive-zone simulations

粘结强度与CF22疲劳参数的联合缩放以加速疲劳粘结区模拟

Engineering Fracture Mechanics

IF5.3

2026-08-170

OAAI

Intraply hybridisation effects on the translaminar fracture behaviour of 3D-printed semi-woven composites

层内混杂效应对3D打印半编织复合材料层间断裂行为的影响

Composite Structures

IF7.1

2026-07-010

PRE

Influence of post-processing on the Mode I and Mode II static fracture toughness of additively manufactured carbon fiber composites

后处理对增材制造碳纤维复合材料模式I和模式II静态断裂韧性的影响

Composite Structures

IF7.1

2025-09-220

OAAI

Investigation of pseudo-ductile behaviour in 3D printed glass/carbon composites using interply and intraply hybridisation

研究通过层间和层内混杂3D打印玻璃/碳复合材料的准延性行为

composites part a applied science and manufacturing

IF0

2025-06-120

Comparative analysis of MEMS (Micro-Electro-Mechanical Sensor) and IEPE (Integrated Electronics Piezo-Electric) accelerometers for measurement of wide spectrum damping

MEASUREMENT

IF5.6

2025-01-011

PRE

Investigating the mode one interlaminar performance of semi-woven 3D printed hybrid composites

COMPOSITE STRUCTURES

IF7.1

2025-01-010

OAAI

Investigating the tensile properties of 3D printed semi-woven intraply hybrid composites reinforced with carbon/glass continuous fibres

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2024-02-013

PRE

Investigating the translaminar fracture toughness of 3D printed semi-woven and non-woven continuous carbon fibre composites

COMPOSITE STRUCTURES

IF7.1

2023-02-0116

PRE

3D printed continuous fibre composite repair of sandwich structures

COMPOSITE STRUCTURES

IF7.1

2022-06-0112

PRE

Predicting fatigue damage in composites subjected to general loading conditions

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2022-05-0116

PRE

A segment-to-segment cohesive contact network approach for mesoscale composites failure modelling

用于中尺度复合材料失效建模的分段到分段粘性接触网络方法

COMPOSITE STRUCTURES

IF7.1

2022-03-012

PRE

Tow wise modelling of non-conventional automated fibre placement composites: short beam shear study

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2022-03-0110

PRE

3D printed continuous fibre-reinforced composites: Design and characterisation of advanced pseudo-ductile hybrid laminates

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2021-07-0129

PREAI

An embedded meshing technique (SET) for analysing local strain distributions in textile composites

用于分析纺织复合材料中局部应变分布的嵌入式网格技术 (SET)

COMPOSITE STRUCTURES

IF7.1

2019-02-0112

OAAI

Effect of environmental conditions on the failure mechanisms and energy absorption of open-section crush elements under quasi-static loading

COMPOSITE STRUCTURES

IF7.1

2019-02-0113

PREAI

An enhanced ply damage model for failure prediction in unidirectional composite structures

单向复合材料结构失效预测的增强铺层损伤模型

COMPOSITE STRUCTURES

IF7.1

2019-01-013

PREAI

A cohesive network approach for modelling fibre and matrix damage in composite laminates

COMPOSITE STRUCTURES

IF7.1

2018-12-0116

OAAI

Effect of residual stress on the matrix fatigue cracking of rapidly cured epoxy/anhydride composites

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2017-10-0124

PREAI

Prediction of mode I delamination resistance of z-pinned laminates using the embedded finite element technique

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

IF8.9

2016-12-0130

PREAI

M.W. Joosten

个人简介

教育背景

工作经历

荣誉奖项

研究方向