logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Marcello Gelfi

department of mechanical and industrial engineering

24H指数
127论文数
2.2K被引数
收录论文 32
发表时间
logo
Failure analysis of a hot stamped CuZn40Pb2 brass hydraulic component
errEngineering Failure Analysis
IF5.7
err2026-01-25
err0
PREAI
errLevy Bertoletti; Marcello Gelfi; Luca Girelli; Annalisa Pola
err分享
err收藏
Effect of different heat treatments on the high temperature tensile behavior and electrical/thermal conductivity of HPDC castings in high recycled content AlSi10MnMg alloy不同热处理对高回收含量AlSi10MnMg合金高压压铸件的高温拉伸行为及电/热导率的影响
errJournal of Alloys and Compounds
IF6.3
err2025-12-04
err0
errOAAI
errElena Mingotti; Luca Girelli; Marialaura Tocci; Riccardo Arcaleni; Matteo Dongellini; Lorella Ceschini; Marcello Gelfi; Annalisa Pola
err分享
err收藏
Root-Cause Analysis of a Failed LPBF Conformal Cooling Insert for Die Casting失败选区激光粉末床熔融（LPBF）型腔冷却镶块的根因分析
errInternational Journal of Metalcasting
IF2.5
err2025-11-23
err0
errOAAI
errLuca Marchini; Marcello Gelfi; Luigi Solazzi; Annalisa Pola
err分享
err收藏
Innovative application of steelmaking slag from ladle furnace as filler for recycled nitrile butadiene rubber industrial scrap钢包炉炼钢渣在回收丁腈橡胶工业废料中的创新应用作为填料
errJournal of Environmental Chemical Engineering
IF7.2
err2025-09-24
err0
errOAAI
errAnna Gobetti; Giorgio Ramorino; Marcello Gelfi; Laura Eleonora Depero; Annalisa Zacco; Matteo Fenotti; Giovanna Cornacchia
err分享
err收藏
Experimental Validation of HTC Value on a 27-Tonne Polygonal Steel Ingot by Numerical Simulation通过数值模拟对27吨多边形钢锭HTC值的实验验证
errInternational Journal of Metalcasting
IF2.5
err2025-08-29
err0
errOAAI
errAnna Mantelli; Annalisa Pola; Marcello Gelfi; Cristian Viscardi; Flavio Ricchini; Massimo Svanera; Francesco Bergamaschi
err分享
err收藏
Silicon Tetrachloride as innovative working fluid for high temperature Rankine cycles: Thermal Stability, material compatibility, and energy analysis四氯化硅作为高温朗肯循环的创新工作流体: 热稳定性，材料兼容性和能量分析
errAPPLIED THERMAL ENGINEERING
IF6.9
err2024-07-01
err10
errOAAI
errDoninelli, M.; Di Marcoberardino, G.; Iora, P.; Gelfi, M.; Invernizzi, C. M.; Manzolini, G.
err分享
err收藏
Development of Heat Treatments for Selective Laser Melting Ti6Al4V Alloy: Effect on Microstructure, Mechanical Properties, and Corrosion Resistance (vol 22, 2000359, 2020)
errADVANCED ENGINEERING MATERIALS
IF3.3
err2024-05-17
err0
errOAAI
errCecchel, S.; Ferrario, D.; Cornacchia, G.; Gelfi, M.
err分享
err收藏
White steel slag from ladle furnace as calcium carbonate replacement for nitrile butadiene rubber: A possible industrial symbiosis
errRESULTS IN ENGINEERING
IF7.9
err2023-06-01
err8
errOAAI
errGobetti, Anna; Cornacchia, Giovanna; Gelfi, Marcello; Ramorino, Giorgio
err分享
err收藏
Wear Behavior of AlSi10Mg Alloy Produced by Laser-Based Powder Bed Fusion and Gravity Casting激光基粉末床熔融和重力铸造生产AlSi10Mg合金的磨损行为
errADVANCED ENGINEERING MATERIALS
IF3.3
err2021-08-25
err24
errOAAI
errTonolini, Pietro; Montesano, Lorenzo; Tocci, Marialaura; Pola, Annalisa; Gelfi, Marcello
err分享
err收藏
Development of Heat Treatments for Selective Laser Melting Ti6Al4V Alloy: Effect on Microstructure, Mechanical Properties, and Corrosion Resistance
errADVANCED ENGINEERING MATERIALS
IF3.3
err2020-06-03
err34
PREAI
errCecchel, Silvia; Ferrario, Davide; Cornacchia, Giovanna; Gelfi, Marcello
err分享
err收藏
Effect of heat treatment on microstructure and erosion resistance of white cast irons for slurry pumping applications
errWEAR
IF6.1
err2019-06-01
err30
PREAI
errGelfi, Marcello; Pola, Annalisa; Girelli, Luca; Zacco, Annalisa; Masotti, Marianovella; La Vecchia, Giovina Marina
err分享
err收藏
Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy与相应铸造合金相比，增材制造AlSi10Mg的热处理参数研究
errMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
IF7
err2019-01-01
err191
PREAI
errGirelli, Luca; Tocci, Marialaura; Gelfi, Marcello; Pola, Annalisa
err分享
err收藏
A356-T6 wheels: Influence of casting defects on fatigue design
errFATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
IF3.2
err2018-05-10
err20
PREAI
errTebaldini, M.; Petrogalli, C.; Donzella, G.; Gelfi, M.; La Vecchia, G. M.
err分享
err收藏
Investigation of cavitation erosion resistance of AlSi10Mg alloy for additive manufacturing
errWEAR
IF6.1
err2018-05-01
err37
PREAI
errGirelli, Luca; Tocci, Marialaura; Montesano, Lorenzo; Gelfi, Marcello; Pola, Annalisa
err分享
err收藏
Influence of the Manufacturing Process on Defects in the Galvanized Coating of High Carbon Steel Wires制造工艺对高碳钢丝镀锌层缺陷的影响
errMATERIALS
IF3.2
err2017-03-06
err8
errOAAI
errGelfi, Marcello; Solazzi, Luigi; Poli, Sandro
err分享
err收藏
Comparison of the sliding wear of a novel Zn alloy with that of two commercial Zn alloys against bearing steel and leaded brass
errWEAR
IF6.1
err2016-12-01
err21
PREAI
errPola, Annalisa; Montesano, Lorenzo; Gelfi, Marcello; La Vecchia, Giovina Marina
err分享
err收藏
Fatigue design of heavy section ductile irons: Influence of chunky graphite大断面球墨铸铁的乏力设计: 块状石墨的影响
errMATERIALS & DESIGN
IF7.9
err2016-12-01
err30
PREAI
errFoglio, E.; Lusuardi, D.; Pola, A.; La Vecchia, G. M.; Gelfi, M.
err分享
err收藏
Comprehensive Numerical Simulation of Filling and Solidification of Steel Ingots
errMATERIALS
IF3.2
err2016-09-09
err9
errOAAI
errPola, Annalisa; Gelfi, Marcello; La Vecchia, Giovina Marina
err分享
err收藏
Micromilling of Lamellar Ti6Al4V: Cutting Force Analysis
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2015-06-15
err13
PREAI
errGelfi, M.; Attanasio, A.; Ceretti, E.; Garbellini, A.; Pola, A.
err分享
err收藏
Tribological and corrosion behavior of CrN coatings: Roles of substrate and deposition defects
errSURFACE & COATINGS TECHNOLOGY
IF6.1
err2014-11-01
err52
PREAI
errPetrogalli, C.; Montesano, L.; Gelfi, M.; La Vecchia, G. M.; Solazzi, L.
err分享
err收藏

研究方向

暂无研究方向
合作学者
合作期刊
E
Elza Bontempi
H 指数: 59 · 论文数: 433
G
Giampaolo Manzolini
H 指数: 56 · 论文数: 332
L
Laura E. Depero
H 指数: 50 · 论文数: 452
L
Lorella Ceschini
H 指数: 43 · 论文数: 290
C
Claudio Giardini
H 指数: 41 · 论文数: 387
查看更多