logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
S

Shrikrishna N. Joshi

indian institute of technology system (iit system)

34H指数
196论文数
4.1K被引数
收录论文 23
发表时间
logo
Implication of thermo-physical modelling in pulsed laser-produced micro-dimples on titanium alloy脉冲激光制备钛合金微凹坑的热物理模型意义
errInternational Journal of Interactive Design and Manufacturing - IJIDeM
IF2.5
err2026-07-01
err0
PREAI
errSingh, Brijesh Kumar; Kapil, Sajan; Joshi, Shrikrishna N.
err分享
err收藏
Investigating Surface Modification Response Morphologies of Jalore Pink Granite During Laser Scanning and Manual Burst-Mode Repetitive Pulsing研究激光扫描和手动突发模式重复脉冲过程中Jalore Pink Granite表面改性响应形貌
errRock Mechanics and Rock Engineering
IF6.6
err2026-02-12
err0
PREAI
errAntash Kishore Sinha; Shrikrishna N. Joshi
err分享
err收藏
A thermo-physical model for computation of in situ arc pressure during the submerged arc-based additive manufacturing一种用于计算埋弧基增材制造过程中原位电弧压力的热物理模型
errProgress in Additive Manufacturing
IF5.4
err2025-10-22
err0
PREAI
errSuraj Goala; Shrikrishna N. Joshi
err分享
err收藏
Investigations into crack evolution during controlled continual laser-based rock processing关于受控连续激光基岩石加工过程中裂纹演化的研究
errGeomechanics for Energy and the Environment
IF3.7
err2025-09-14
err0
PREAI
errAntash K. Sinha; Shrikrishna N. Joshi
err分享
err收藏
Hybrid wire arc directed energy deposition and machining approach for realizing density-based functionally graded materials with enhanced strength-to-weight ratios混合丝材电弧定向能量沉积与加工方法，用于实现基于密度的具有增强强度-重量比的梯度功能材料
errCIRP Journal of Manufacturing Science and Technology
IF5.4
err2025-06-17
err0
PREAI
errRitam Sarma; Atul Singh Rajput; Sajan Kapil; Shrikrishna Nandkishor Joshi
err分享
err收藏
Thermo-flow modeling of geometry evolution considering the velocity flow fields during pulsed-laser processing
errINTERNATIONAL JOURNAL OF THERMAL SCIENCES
IF5
err2025-03-01
err0
PREAI
errSingh, Brijesh Kumar; Kapil, Sajan; Joshi, Shrikrishna N.
err分享
err收藏
Critical raw material-free multi-principal alloy design for a net-zero future
errSCIENTIFIC REPORTS
IF3.9
err2025-01-24
err0
errOAAI
errSingh, Swati; Bai, Mingwen; Matthews, Allan; Goel, Saurav; Joshi, Shrikrishna N.
err分享
err收藏
Strain engineering: A sustainable alternative to avoid using strategic and critical raw materials in developing high-performance alloys
errMATERIALS TODAY ADVANCES
IF8
err2024-12-01
err0
errOAAI
errSingh, Swati; Bai, Mingwen; Matthews, Allan; Joshi, Shrikrishna N.; Goel, Saurav
err分享
err收藏
A comparative analysis of trochoidal toolpath with traditional toolpaths used in wire arc-based directed energy deposition process
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-07-27
err0
PREAI
errSarma, Ritam; Kapil, Sajan; Joshi, Shrikrishna N.
err分享
err收藏
Evolution of near homogenous mechanical and microstructural properties in wire-arc based directed energy deposition of low carbon steel following trochoidal trajectory toolpath
errJOURNAL OF MATERIALS PROCESSING TECHNOLOGY
IF7.5
err2023-06-01
err4
PREAI
errSarma, Ritam; Singh, Amit Kumar; Kapil, Sajan; Bag, Swarup; Joshi, Shrikrishna N.
err分享
err收藏
Phase prediction and experimental realisation of a new high entropy alloy using machine learning
errSCIENTIFIC REPORTS
IF3.9
err2023-03-23
err33
errOAAI
errSingh, Swati; Katiyar, Nirmal Kumar; Goel, Saurav; Joshi, Shrikrishna N.
err分享
err收藏
Determining alloyed layer thickness in electric discharge alloying by inverse estimation of energy distribution
errINTERNATIONAL JOURNAL OF THERMAL SCIENCES
IF5
err2022-07-01
err0
PREAI
errDevarani, Ngangkham; Joshi, Shrikrishna N.
err分享
err收藏
Challenges and issues in continuum modelling of tribology, wear, cutting and other processes involving high-strain rate plastic deformation of metals
errJOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
IF3.5
err2022-06-01
err7
errOAAI
errMir, Amir; Luo, Xichun; Llavori, Inigo; Roy, Anish; Zlatanovic, Danka Labus; Joshi, Shrikrishna N.; Goel, Saurav
err分享
err收藏
Assessment of ignition risk in dry helical hole milling of AZ31 magnesium alloy considering the machining temperature and chip morphology
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-05-01
err6
PREAI
errBolar, Gururaj; Adhikari, Raviraja; Nayak, Sadvidya N.; Joshi, Shrikrishna N.
err分享
err收藏
Measurement and analysis of molybdenum wire erosion and deformation during wire electric discharge machining of Ti-6Al-4V alloyTi-6Al-4V电火花加工钼丝腐蚀变形的测量与分析
errMEASUREMENT
IF5.6
err2021-07-01
err10
PREAI
errDas, Sanghamitra; Joshi, Shrikrishna Nandkishor
err分享
err收藏
Machinability of Inconel 718: A critical review on the impact of cutting temperaturesInconel 718的可加工性: 对切削温度影响的严格审查
errMATERIALS AND MANUFACTURING PROCESSES
IF4.7
err2021-03-22
err96
PREAI
errMahesh, Kore; Philip, Jibin T.; Joshi, S. N.; Kuriachen, Basil
err分享
err收藏
Electric discharge alloying of titanium and aluminium on AISI P20 mold steel钛和铝在AISI P20模具钢上的放电合金化
errSURFACE & COATINGS TECHNOLOGY
IF6.1
err2021-01-01
err18
PREAI
errDevarani, Ngangkham; Joshi, Shrikrishna N.
err分享
err收藏
Fabrication of microchannel on polycarbonate below the laser ablation threshold by repeated scan via the second harmonic of Q-switched Nd:YAG laser
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2020-07-01
err12
PREAI
errSingh, Sanasam Sunderlal; Khare, Alika; Joshi, Shrikrishna N.
err分享
err收藏
Estimation of wire strength based on residual stresses induced during wire electric discharge machining
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2020-05-01
err22
PREAI
errDas, Sanghamitra; Joshi, Shrikrishna N.
err分享
err收藏
Measurement and analysis of cutting force and product surface quality during end-milling of thin-wall components薄壁零件立铣过程中切削力及产品表面质量的测量与分析
errMEASUREMENT
IF5.6
err2018-06-01
err78
PREAI
errBolar, Gururaj; Das, Argha; Joshi, Shrikrishna N.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
J
J. Paulo Davim
H 指数: 91 · 论文数: 860
A
A. Matthews
H 指数: 78 · 论文数: 541
Xichun Luo 封面图
Xichun Luo (Xichun Luo)
H 指数: 51 · 论文数: 348
S
Saurav Goel
H 指数: 44 · 论文数: 230
U
Uday Shanker Dixit
H 指数: 37 · 论文数: 321
查看更多