V. G. Efremenko - Publications, H-index & Citations

V. G. Efremenko

slovak academy of sciences

25H指数

138论文数

1.3K被引数

收录论文 35

发表时间

Mechanical Degradation and Tempering-Induced Recovery of Nanobainitic Steel After Moderate Sub-Zero Exposure 中温处理后经适度低温暴露纳米贝氏体钢的机械降解与回火诱导恢复

Crystals

IF2.4

2026-05-11

PREAI

Efremenko, Vasily; Chabak, Yuliia; Petrisinec, Ivan; Brykov, Mikhailo; Efremenko, Alexey; Franceschi, Mattia; Ingber, Jerome; Kunert, Maik; Jimenez, Jose Antonio

Hydrogen-Induced Effects on Tensile Properties and Impact Toughness in Additively Manufactured vs. Wrought Austenitic Stainless Steels 氢致效应对增材制造与轧制奥氏体不锈钢拉伸性能和冲击韧性的影响

Corrosion and Materials Degradation

IF2.4

2026-02-24

PREAI

Efremenko, Bohdan; Chabak, Yuliia; Falat, Ladislav; Efremenko, Vasily; Syrotyuk, Andriy; Petrisinec, Ivan; Kromka, Frantisek; Kulyk, Volodymyr

Enhancing Dry-Sliding Wear Performance of a Powder-Metallurgy-Processed Metal Matrix-Carbide Composite via Laser Surface Modification Chabak, Y.; Efremenko, V.; Barma, Y.; Petrišinec, I.; Efremenko, B.; Kromka, F.; Sili, I.; Kovbasiuk, T. 通过激光表面改性提升粉末冶金制备的“金属基体-碳化物”复合材料的干滑动磨损性能。Eng 2025, 6, 313. [Google Scholar] [CrossRef]

ENG

IF2.4

2025-11-05

OAAI

Chabak, Yuliia; Efremenko, Vasily; Barma, Yevhen; Petrisinec, Ivan; Efremenko, Bohdan; Kromka, Frantisek; Sili, Ivan; Kovbasiuk, Taras

Effect of Laser Surface Melting on the Microstructure and Corrosion Resistance of Laser Powder Bed Fusion and Wrought Ti-6Al-4V Alloys 激光表面熔化对激光粉末床熔合和轧制Ti-6Al-4V合金微观结构和耐腐蚀性能的影响

Coatings 2025, Vol. 15, Page 1285

IF2.8

2025-11-03

OAAI

Angeliki G. Lekatou; Vaia Sarika; Bohdan Efremenko; Yuliia Chabak; Vasily Efremenko; Ivan Petrišinec; Sevasti Emmanouilidou; Kyriaki Tsirka

Low-Alloyed Spring Steel: Nanostructure and Strength After Austempering 低合金弹簧钢：等温淬火后的纳米结构与强度

Metals 2025, Vol. 15, Page 1061

IF2.5

2025-10-02

OAAI

Mikhailo Brykov; Vasily Efremenko; Isabella Gallino; Ivan Petrišinets; Oleksii Kapustyan; Olexandr Klymov; Alexey Efremenko; Vasyl’ Girzhon

Microstructure, electrochemical, wear and corrosive wear performance of laser-based powder bed fusion and wrought biomedical Ti−6Al−4V alloys 激光粉末床熔融和锻造生物医学Ti−6Al−4V合金的微观结构、电化学、磨损和腐蚀磨损性能

Transactions of Nonferrous Metals Society of China

IF4.7

2025-08-29

OAAI

A.G. LEKATOU; B.V. EFREMENKO; V. HAOUI; V.G. EFREMENKO; S. EMMANOUILIDOU; V.I. ZURNADZHY; I. PETRYSHYNETS; Yu.G. CHABAK; I.I. SILI

Austempering vs. Q&P: Comparative effects on microstructure and mechanical properties of complex-alloyed TRIP-assisted steel 等温淬火与淬火及部分回火：对复杂合金化TRIP辅助钢微观结构和力学性能的比较影响

Materials Today Communications

IF4.5

2025-07-01

PREAI

V.G. Efremenko; Yu.G. Chabak; I. Petryshynets; I. Sili; T.M. Kovbasiuk; A.V. Efremenko; M.N. Brykov; M. Dabalá; M. Franceschi; H. Halfa; A.G. Lekatou

Laser beam surface modification of additively manufactured Ni-based superalloy: Correlations of microstructure and tribological/ corrosion properties

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2025-03-01

OAAI

Efremenko, V. G.; Lekatou, A. G.; Efremenko, B. V.; Chabak, Yu. G.; Petryshynets, I.; Margariti, D.; Emmanouilidou, S. N.; Puchy, V.

Microstructure Evolution, Tensile/Nanoindentation Response, and Work-Hardening Behaviour of Prestrained and Subsequently Annealed LPBF 316L Stainless Steel

MATERIALS

IF3.2

2025-02-28

OAAI

Efremenko, Bohdan; Chabak, Yuliia; Petryshynets, Ivan; Efremenko, Vasily; Wu, Kaiming; Arshad, Sundas; Kromka, Frantisek

Role of Quenching Temperature Selection in the Improvement of the Abrasive (Al2O3) Wear Resistance of Hybrid Multi-Component Cast Irons

MATERIALS

IF3.2

2024-07-28

OAAI

Chabak, Yuliia; Efremenko, Vasily; Petryshynets, Ivan; Golinskyi, Michail; Shimizu, Kazumichi; Efremenko, Bohdan; Kudin, Vadim; Azarkhov, Alexander

Increasing the Strength and Impact Toughness of Carbon Steel Using a Nanosized Eutectoid Resulting from Time-Controlled Quenching

MATERIALS

IF3.2

2024-07-26

OAAI

Brykov, Michail; Mierzwinski, Dariusz; Efremenko, Vasily; Girzhon, Vasyl'; Shalomeev, Vadim; Shyrokov, Oleksandr V.; Petryshynets, Ivan; Klymov, Olexandr; Kapustyan, Oleksii

Increasing Exploitation Durability of Two-Layer Cast Mill Rolls and Assessment of the Applicability of the XGBoost Machine Learning Method to Manage Their Quality

MATERIALS

IF3.2

2024-07-01

OAAI

Vlasenko, Tetiana; Glowacki, Szymon; Vlasovets, Vitaliy; Hutsol, Taras; Nurek, Tomasz; Lyktei, Viktoriia; Efremenko, Vasily; Khrunyk, Yuliya

Enhancing the Tensile Properties and Ductile-Brittle Transition Behavior of the EN S355 Grade Rolled Steel via Cost-Saving Processing Routes

MATERIALS

IF3.2

2024-04-23

OAAI

Zurnadzhy, Vadym; Stavrovskaia, Vera; Chabak, Yuliia; Petryshynets, Ivan; Efremenko, Bohdan; Wu, Kaiming; Efremenko, Vasily; Brykov, Michail

Micromechanical, corrosion and wet sliding wear behaviours of Co-28Cr-6Mo alloy: Wrought vs. LPBF

MATERIALS TODAY COMMUNICATIONS

IF4.5

2023-06-01

OAAI

Efremenko, V. G.; Lekatou, A. G.; Chabak, Yu. G.; Efremenko, B. V.; Petryshynets, I.; Zurnadzhy, V. I.; Emmanouilidou, S.; Vojtko, M.

Erosive Wear Behavior of Novel Hybrid Multicomponent Cast Alloys with Different C and B Contents

LUBRICANTS

IF2.9

2023-05-31

OAAI

Purba, Riki Hendra; Kusumoto, Kenta; Shimizu, Kazumichi; Efremenko, Vasily

Investigations of Abrasive Wear Behaviour of Hybrid High-Boron Multi-Component Alloys: Effect of Boron and Carbon Contents by the Factorial Design Method

MATERIALS

IF3.2

2023-03-22

OAAI

Chabak, Yuliia; Petryshynets, Ivan; Efremenko, Vasily; Golinskyi, Michail; Shimizu, Kazumichi; Zurnadzhy, Vadym; Sili, Ivan; Halfa, Hossam; Efremenko, Bohdan; Puchy, Viktor

Microstructure and phase elemental distribution in high-boron multi-component cast irons

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS

IF7.2

2022-01-15

PREAI

Chabak, Yu. G.; Shimizu, K.; Efremenko, V. G.; Golinskyi, M. A.; Kusumoto, K.; Zurnadzhy, V. I.; Efremenko, A. V.

Structural and Tribological Assessment of Biomedical 316 Stainless Steel Subjected to Pulsed-Plasma Surface Modification: Comparison of LPBF 3D Printing and Conventional Fabrication

MATERIALS

IF3.2

2021-12-12

OAAI

Chabak, Yuliia; Efremenko, Bohdan; Petryshynets, Ivan; Efremenko, Vasily; Lekatou, Angeliki G.; Zurnadzhy, Vadym; Bogomol, Iurii; Fedun, Victor; Koval, Karol; Pastukhova, Tatiana

Abrasive Wear of High-Carbon Low-Alloyed Austenite Steel: Microhardness, Microstructure and X-ray Characteristics of Worn Surface 高碳低合金奥氏体钢的磨料磨损: 磨损表面的显微硬度，微观结构和x射线特征

MATERIALS

IF3.2

2021-10-17

OAAI

Brykov, Michail Nikolaevich; Akrytova, Taisiia Oleksandrivna; Osipov, Michail Jurievich; Petryshynets, Ivan; Puchy, Viktor; Efremenko, Vasily Georgievich; Shimizu, Kazumichi; Kunert, Maik; Hesse, Olaf

High-temperature erosive wear characteristics and bonding requirements of hard carbides cast-in insertion multi-component white cast iron 硬质合金插入型多组分白口铸铁的高温腐蚀磨损特性和结合要求

WEAR

IF6.1

2021-07-01

OAAI

Kusumoto, Kenta; Shimizu, Kazumichi; Efremenko, V. G.; Hara, Hiroya; Shirai, Masato; Ito, Jun; Yilagaqi; Purba, Riki

研究方向