logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
J

Jorge Ramos‐Grez

Pontificia Universidad Católica de Chile

22H指数
115论文数
1.7K被引数
收录论文 33
发表时间
logo
Process-related tribological and corrosion behavior of additively manufactured 17-4 PH stainless steel增材制造17-4 PH不锈钢的加工相关摩擦学及腐蚀行为
errWear
IF6.1
err2026-09-19
err0
errOAAI
errChristian Orgeldinger; Armin Seynstahl; Tobias Rosnitschek; Jorge Ramos Grez; Magdalena Walczak; Max Marian; Stephan Tremmel
err分享
err收藏
Superficial and subsuperficial compositional and microstructural modification of additive manufactured AlSi10Mg via low-power, low speed laser surface remelting通过低功率、低速度激光表面重熔对增材制造AlSi10Mg的表面及次表面成分和微观结构进行改性
errThe International Journal of Advanced Manufacturing Technology
IF0
err2026-04-18
err0
PREAI
errCarlos Vásquez-Ojeda; Jorge Ramos-Grez; Nan Yu; Carolyn Atkins
err分享
err收藏
Laser Powder Bed Fusion of WS2/316L Stainless Steel Nanocomposites for an Enhanced Mechanical and Tribological Performance
errLangmuir
IF3.9
err2026-01-30
err0
PREAI
errSangharatna M. Ramteke; Suryank Dwivedi; Jorge Ramos-Grez; Dario F Zambrano; Andreas Rosenkranz; Max Marian
err分享
err收藏
Adiabatic efficiency and mechanical properties optimization for the laser-based powder bed fusion process of 316L stainless steel alloy绝热效率与机械性能优化：316L不锈钢合金的激光粉末床熔融工艺
errMaterials Today Communications
IF4.5
err2025-09-09
err0
PREAI
errIván La Fé-Perdomo; Oscar Loyola; Germán Omar Barrionuevo; Jorge A. Ramos-Grez
err分享
err收藏
A first-principles DFT study and molecular dynamics simulation of the mechanism of water adsorption in polyamide-6基于第一性原理DFT的研究和分子动力学模拟：聚酰胺-6中水吸附机制的探讨
errComputational and Theoretical Chemistry
IF2.8
err2025-08-31
err0
PREAI
errRafael A Mujica; Raiza Hernández-Bravo; José G. Parra; Peter Iza; Nayeli Camacho; Guillermo C Mondragón-Rodríguez; Jorge A Ramos-Grez; Vladimiro Mujica
err分享
err收藏
Machine learning-based estimation of CO2 footprint and environmental-mechanical performance of blended cement concrete基于机器学习对掺合料水泥混凝土的CO2足迹和环境-力学性能的估计
errCase Studies in Construction Materials
IF6.6
err2025-07-01
err0
errOAAI
errFelipe Vargas; Iván La Fé-Perdomo; Jorge A. Ramos-Grez; Ivan Navarrete
err分享
err收藏
Laser bending of wood veneers: Phenomenological and machine-learning approaches case study木材薄木的激光弯曲：现象学方法和机器学习方法案例研究
errOPTICS AND LASER TECHNOLOGY
IF5
err2025-05-14
err0
PREAI
errRamos-Grez, Jorge A.; La Fe-Perdomo, Ivan; Calvo-Sofia, Sergio
err分享
err收藏
Ti3C2Tx and Mo2TiC2Tx MXenes as additives in synovial fluids - towards an enhanced biotribological performance of 3D-printed implantsTi3C2Tx和Mo2TiC2Tx MXenes作为滑液中的添加剂-增强3d打印植入物的生物摩擦学性能
errAPPLIED MATERIALS TODAY
IF6.9
err2024-12-01
err0
errOAAI
errMarian, Max; Esteban, Cotty D. Quiroz; Zambrano, Dario F.; Ramteke, Sangharatna M.; Grez, Jorge Ramos; Wyatt, Brian C.; Patenaude, Jacob; Wright, Bethany G.; Anasori, Babak; Rosenkranz, Andreas
err分享
err收藏
Microstructural differences and mechanical performance of stainless steel 316L conventionally processed versus a selective laser melted常规加工的316L不锈钢与选择性激光熔化的微观结构差异和机械性能
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2024-09-09
err1
PREAI
errBarrionuevo, German Omar; La Fe-Perdomo, Ivan; Ramos-Grez, Jorge A.; Walczak, Magdalena; Mendez, Patricio F.
err分享
err收藏
Influence of the Processing Parameters on the Microstructure and Mechanical Properties of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion
errJOURNAL OF MANUFACTURING AND MATERIALS PROCESSING
IF3.3
err2024-02-09
err6
errOAAI
errBarrionuevo, German Omar; Ramos-Grez, Jorge Andres; Sanchez-Sanchez, Xavier; Zapata-Hidalgo, Daniel; Mullo, Jose Luis; Puma-Araujo, Santiago D.
err分享
err收藏
Suitability of nickel aluminium bronze alloy fabricated by laser powder bed fusion to be used in the marine environment
errCORROSION SCIENCE
IF8.5
err2024-01-01
err10
errOAAI
errArcos, C.; Ramos-Grez, J. A.; Sancy, M.; La Fe-Perdomo, I.; Setchi, R.; Guerra, C.
err分享
err收藏
A novel optimization framework for minimizing the surface roughness while increasing the material processing rate in the SLM process of 316L stainless steel
errRAPID PROTOTYPING JOURNAL
IF3.6
err2023-09-01
err1
PREAI
errLa Fe-Perdomo, Ivan; Ramos-Grez, Jorge Andres; Quiza, Ramon; Jeria, Ignacio; Guerra, Carolina
err分享
err收藏
Ni-Al Bronze in Molten Carbonate Manufactured by LPBF: Effect of Porosity Design on Mechanical Properties and Oxidation
errMATERIALS
IF3.2
err2023-05-22
err5
errOAAI
errArcos, Camila; Guerra, Carolina; Ramos-Grez, Jorge A.; Sancy, Mamie
err分享
err收藏
Theoretical study of the interactions between vibrations of large numbers of FDM 3D printers
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2023-03-30
err0
PREAI
errRamos-Grez, Jorge; Sen, Mihir; Ramos-Cahis, Matias
err分享
err收藏
Applicability of LPBF for producing Cu-11Al-5Ni-4Fe wt.% with shape memory properties
errSMART MATERIALS AND STRUCTURES
IF3.8
err2023-03-03
err2
PREAI
errGuerra, C.; Ramos-Grez, J. A.; La Fe-Perdomo, I; Castillo, A.; Walczak, M.
err分享
err收藏
Predicting the evolution of static yield stress with time of blended cement paste through a machine learning approach
errCONSTRUCTION AND BUILDING MATERIALS
IF8
err2023-03-01
err13
PREAI
errNavarrete, Ivan; La Fe-Perdomo, Ivan; Ramos-Grez, Jorge A.; Lopez, Mauricio
err分享
err收藏
Microstructure simulation and experimental evaluation of the anisotropy of 316 L stainless steel manufactured by laser powder bed fusion激光粉末床熔融制造316 L不锈钢各向异性的微观组织模拟和实验评估
errRAPID PROTOTYPING JOURNAL
IF3.6
err2022-08-23
err16
PREAI
errOmar Barrionuevo, German; Andres Ramos-Grez, Jorge; Walczak, Magdalena; Sanchez-Sanchez, Xavier; Guerra, Carolina; Debut, Alexis; Haro, Edison
err分享
err收藏
Comparative analysis and experimental validation of statistical and machine learning-based regressors for modeling the surface roughness and mechanical properties of 316L stainless steel specimens produced by selective laser melting
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-08-01
err33
PREAI
errLa Fe-Pedomo, Ivan; Ramos-Grez, Jorge A.; Jeria, Ignacio; Guerra, Carolina; Barrionuevo, German Omar
err分享
err收藏
Analytical and Machine Learning-based approaches to estimate the steady-state temperature limit on the surface of Cu powder beds when heated by a concentrated laser energy source
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2022-04-01
err3
PREAI
errRamos-Grez, Jorge A.; La Fe-Perdomo, Ivan; Larrain, Tomas
err分享
err收藏
Selective laser melting: lessons from medical devices industry and other applications
errRAPID PROTOTYPING JOURNAL
IF3.6
err2021-08-23
err24
PREAI
errFe-Perdomo, Ivan La; Ramos-Grez, Jorge Andres; Beruvides, Gerardo; Mujica, Rafael Alberto
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
B
Babak Anasori
H 指数: 109 · 论文数: 307
A
Alicia Durán
H 指数: 59 · 论文数: 525
A
Andreas Rosenkranz
H 指数: 58 · 论文数: 269
V
Vladimiro Mújica
H 指数: 47 · 论文数: 249
G
Germán Barrionuevo
H 指数: 47 · 论文数: 143
查看更多