Bahador Bahrami - Publications, H-index & Citations

Bahador Bahrami

Sharif University of Technology

23H指数

71论文数

1.4K被引数

收录论文 43

发表时间

Inverse design of composite TPMS structures using multi-objective Bayesian optimization framework 基于多目标贝叶斯优化框架的复合TPMS结构逆向设计

Composite Structures

IF7.1

2026-09-04

PREAI

Bahador Bahrami; Hossein Talebi; Fatemeh Ardakani; Majid R. Ayatollahi

Machine learning prediction of failure load in composite and metallic single-lap adhesive joints 机器学习预测复合材料和金属单搭接胶接接头的失效载荷

International Journal of Adhesion and Adhesives

IF3.5

2026-01-08

PREAI

Bahador Bahrami; Saba abbaszadeh; Hossein Talebi; Majid R. Ayatollahi; Mohammad Reza Khosravani

Combined effects of loading rate, adherend stiffness, and surface roughness on the fracture of epoxy adhesive joints

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY

IF3.7

2025-12-01

PREAI

Darvishi, Irana; Nourani, Amir; Bahrami, Bahador

Mixed-mode fracture prediction of notched components using phase-field approach 使用相场方法对缺口分量进行混合模式断裂预测

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2025-01-01

PREAI

Bahrami, Bahador; Ahmadian, Hossein; Mehraban, Mohammad R.; Ayatollahi, Majid R.

A simple, fast, and robust criterion for predicting fracture load and crack growth path in notched elastoplastic plates under mixed-mode loading 一种简单，快速且强大的准则，用于预测混合模式载荷下缺口弹塑性板的断裂载荷和裂纹扩展路径

THEORETICAL AND APPLIED FRACTURE MECHANICS

IF5.6

2024-10-01

PREAI

Hasaninia, M.; Torabi, A. R.; Bahrami, B.

An investigation of machine learning algorithms for estimating fracture toughness of asphalt mixtures 用于估计沥青混合料断裂韧性的机器学习算法的研究

CONSTRUCTION AND BUILDING MATERIALS

IF8

2024-07-01

PREAI

Talebi, Hossein; Bahrami, Bahador; Ahmadian, Hossein; Nejati, Morteza; Ayatollahi, Majid R.

A novel approach combining the extended finite element method and the finite element over-deterministic method to predict mixed-mode fracture of rock by using unstructured coarse mesh 一种结合扩展有限元法和有限元超确定性方法的新方法，通过使用非结构化粗网格预测岩石的混合模式断裂

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2024-06-25

PREAI

Mehraban, Mohammad Reza; Ayatollahi, Majid Reza; Ghouli, Saeid; Bahrami, Bahador

Experimental and theoretical investigation of the influence of post-curing on mixed mode fracture properties of 3d-printed polymer samples 后固化对3d打印聚合物样品混合模式断裂性能影响的实验和理论研究

SCIENTIFIC REPORTS

IF3.9

2024-06-08

OAAI

Bahrami, Bahador; Talebi, Hossein; Momeni, M. M.; Ayatollahi, M. R.

Mixed mode brittle fracture prediction in cracks under frictional condition 摩擦条件下裂纹中的混合模式脆性断裂预测

THEORETICAL AND APPLIED FRACTURE MECHANICS

IF5.6

2024-02-01

PREAI

Bahrami, B.; Ayatollahi, M. R.; Gholizadeh, A. H.; Mirzaei, A. M.; Mehraban, M. R.

Data-driven based fracture prediction of notched components

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

IF3.7

2023-11-20

PREAI

Talebi, Hossein; Bahrami, Bahador; Daneshfar, Mohammad; Bagherifard, Sara; Ayatollahi, Majid R.

A new strategy for predicting fracture of U-notched specimens made of Al-6061-T6 and Al-5083 using extended finite element method

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2023-06-22

PREAI

Bagheri, Pedram; Torabi, Ali Reza; Bahrami, Bahador

Artificial neural network in prediction of mixed-mode I/II fracture load 人工神经网络在混合模式I/II断裂载荷预测中的应用

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

IF9.4

2023-06-01

PREAI

Bahrami, Bahador; Talebi, Hossein; Ayatollahi, Majid R.; Khosravani, Mohammad Reza

Non-local and local criteria based on the extended finite element method (XFEM) for fracture simulation of anisotropic 3D-printed polymeric components

RAPID PROTOTYPING JOURNAL

IF3.6

2023-05-29

PREAI

Bahrami, Bahador; Mehraban, Mohammad Reza; Koloor, Seyed R.; Ayatollahi, Majid R.

Experimental stress determination of blunt notches under combinations of modes I and II loading

ENGINEERING STRUCTURES

IF6.4

2023-03-01

PREAI

Alavi, S. K.; Ayatollahi, M. R.; Daneshfar, M.; Bahrami, B.

A Non-local XFEM-Based Methodology for Modeling Mixed-mode Fracturing of Anisotropic Rocks 基于非局部XFEM的各向异性岩石混合模式破裂建模方法

ROCK MECHANICS AND ROCK ENGINEERING

IF6.6

2022-11-19

PREAI

Mehraban, Mohammad R.; Bahrami, B.; Ayatollahi, M. R.; Nejati, M.

Experimental and theoretical assessment of crack kinking in marble stones in the presence of a V-notch under mode I loading

CONSTRUCTION AND BUILDING MATERIALS

IF8

2022-11-01

PREAI

Bahrami, B.; Bahadori, A.; Petru, M.; Nejati, M.; Ayatollahi, M. R.

On the use of Brazilian disk specimen for measuring mixed-mode I/II translaminar fracture toughness of notched glass/epoxy composite laminates: A comprehensive study 关于使用巴西圆盘试样测量缺口玻璃/环氧树脂复合层压板的混合模式I/II跨层断裂韧性: 一项综合研究

THEORETICAL AND APPLIED FRACTURE MECHANICS

IF5.6

2022-10-01

PREAI

Torabi, A. R.; Bahrami, B.; Motamedi, M. A.; Hasanvand, H.

On the effects of higher order stress terms in pure mode III loading of bi-material notches

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2022-08-29

PREAI

Bahrami, Bahador; Ayatollahi, Majid R.; Mehraban, Mohammad R.; Nejati, Morteza; Berto, Filippo

On the prediction of the stress field in adhesive joints using a combined analytical-numerical method

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

IF3.5

2022-07-01

PREAI

Bahrami, B.; Ayatollahi, M. R.; Alavi, S. K.; da Silva, L. F. M.

In-situ optical approach to predict mixed mode fracture in a polymeric biomaterial 原位光学方法预测聚合物生物材料中的混合模式骨折

THEORETICAL AND APPLIED FRACTURE MECHANICS

IF5.6

2022-04-01

PREAI

Ghouli, Saeid; Ayatollahi, Majid R.; Bahrami, Bahador; Jamali, Jamaloddin

研究方向