Fatih Huzeyfe Öztürk - Publications, H-index & Citations

Fatih Huzeyfe Öztürk

Karabük University

10H指数

32论文数

208被引数

收录论文 13

发表时间

Experimental investigation of interfacial behavior of multi-material additively manufactured structures 多材料增材制造结构的界面行为实验研究

Journal of Adhesion Science and Technology

IF3.7

2026-07-28

PREAI

Reyhan Deniz Can; Fatih Huzeyfe Öztürk

Enhancing the Tribological Performance of PLA via Process-Induced Functional Grading in Masked Stereolithography 通过掩模立体光刻过程中的工艺诱导功能梯度提升PLA的摩擦学性能

polymer engineering & science

IF0

2026-04-14

OAAI

Muhammet Mevlüt Karaca; Abdurrahim Temiz; Fatih Huzeyfe Öztürk

Design-dependent mechanical performance of additively manufactured hybrid hierarchical TPMS-based auxetic polymer structures 增材制造依赖设计的基于TPMS的负泊松比聚合物混合分级结构的机械性能

Materials Testing

IF3.5

2026-01-01

PREAI

Ozturk, Fatih Huzeyfe; Aktas, Kerim Gokhan; Karaca, Muhammet Mevlut; Temiz, Abdurrahim; Pehlivan, Fatih

Numerical and Experimental Investigation of Failure Mechanisms in Additively Manufactured Multimaterial Triply Periodic Minimal Surface Polymer Cellular Materials 增材制造的多材料三重周期性最小表面聚合物蜂窝材料失效机理的数值和实验研究

ADVANCED ENGINEERING MATERIALS

IF3.3

2026-01-01

PREAI

Ozturk, Fatih Huzeyfe; Temiz, Abdurrahim; Pehlivan, Fatih

Absorbed energy and maximum force analysis of tube-shaped surface faceted lattice structures under compression loading 压缩载荷下管状表面面化点阵结构的吸收能量与最大力分析

Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science

IF1.7

2026-01-01

PREAI

Temiz, Abdurrahim; Ozturk, Fatih Huzeyfe; Karamanli, Ismail Aykut; Pehlivan, Fatih

Experimental and numerical investigation of joint geometry effects on the mechanical integrity of 3D-printed polymer bonded structures 实验与数值研究：接头几何形状对3D打印聚合物粘接结构力学完整性的影响

International Journal of Mechanics and Materials in Design

IF3.6

2025-12-21

PREAI

Fatih Huzeyfe Öztürk; Muhammet Mevlüt Karaca; Ahmet Fatih Yılmaz; Ali Kafalı

Flexural performance of 3D-Printed auxetic panels: Influence of core design, material, and orientation 3D打印负泊松比面板的弯曲性能：芯层设计、材料和取向的影响

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES

IF2.2

2025-10-01

PREAI

Ozturk, Fatih Huzeyfe; Pehlivan, Fatih; Temiz, Abdurrahim

Design and Evaluation of Hierarchical Strut-Based Lattices with Triply Periodic Minimal Surface-Inspired Shells for Bioinspired Applications

Journal of Materials Engineering and Performance

IF2

2025-10-01

PREAI

Temiz, Abdurrahim; Yilmaz, Ahmet Fatih; Ozturk, Fatih Huzeyfe; Pehlivan, Fatih; Karaca, Muhammet Mevlut

Strut-based design optimization for improving mechanical properties of lattice structures 基于支柱的设计优化以提高点阵结构的力学性能

INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN

IF3.6

2025-04-17

OAAI

Ozturk, Fatih Huzeyfe; Karamanli, Ismail Aykut; Temiz, Abdurrahim

Heat-Treatment and Water Immersion Effect on the Mechanical Properties and Joint Strength of 3D-Printed Polylactic Acid Parts

POLYMERS FOR ADVANCED TECHNOLOGIES

IF3.4

2024-10-30

OAAI

Ozturk, Fatih Huzeyfe; Oz, Ozkan

Optimization of functionally graded solid-network TPMS meta-biomaterials 功能梯度固体网络TPMS超生物材料的优化

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS

IF3.5

2024-09-01

PREAI

Pehlivan, Fatih; Ozturk, Fatih Huzeyfe; Demir, Sermet; Temiz, Abdurrahim

Optimization of adherend thickness and overlap length on failure load of bonded 3D printed PETG parts using response surface method

RAPID PROTOTYPING JOURNAL

IF3.6

2024-07-19

PREAI

Ozturk, Fatih Huzeyfe

Algorithms for grouping machining operations and planning workpiece location under dynamic machining conditions

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH

IF7.3

2010-11-14

PREAI

Kaya, N; Öztürk, F

研究方向