Akbar Heidarpour - Publications, H-index & Citations

Mechanical properties and tribological performance of A356/Cr3C2-NiCr surface composite developed by high-velocity oxy-fuel and post friction stir processing treatment

IF5.6

2022-04-01

PREAI

Heidarpour, A.; Faraji, M.; Haghighi, A.

SURFACES AND INTERFACES

IF6.3

2022-02-01

PREAI

Mazaheri, Yousef; Malmir, Reza; Jalilvand, Mohammad Mahdi; Sheikhi, Mohsen; Heidarpour, Akbar

Structural and morphological characterization of the layered carbide-derived-carbon nanostructures obtained by HF etching of Ti2AlC

SYNTHETIC METALS

IF4.6

2020-09-01

PREAI

Heidarpour, Akbar; Aghamohammadi, Hamed; Ghasemi, Samad

Mechanism of TiC formation in laser surface treatment of the commercial pure titanium pre-coated by carbon using PVD process

Tribological behavior of AZ31/ZrO2 surface nanocomposites developed by friction stir processing

IF6.3

2020-09-01

PREAI

Bahiraei, Mahsa; Mazaheri, Yousef; Sheikhi, Mohsen; Heidarpour, Akbar

TRIBOLOGY INTERNATIONAL

IF6.9

2020-03-01

PREAI

Mazaheri, Yousef; Jalilvand, Mohammad Mandi; Heidarpour, Akbar; Jahani, Amir Reza

A new approach to synthesis Ti2AlC MAX phase using PVD coating and post-laser treatment

Theoretical analysis and experimental Validation of selective oxalate precipitation

IF6.1

2020-03-01

PREAI

Bahiraei, Mahsa; Mazaheri, Yousef; Sheikhi, Mohsen; Heidarpour, Akbar

MINERAL PROCESSING AND EXTRACTIVE METALLURGY-TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY

IF1

2020-02-23

PREAI

Ghasemi, S.; Rafiei, N.; Heidarpour, A.

On the surface reinforcing of A356 aluminum alloy by nanolayered Ti3AlC2 MAX phase via friction stir processing 纳米Ti3AlC2 MAX相搅拌摩擦强化A356铝合金表面的研究

Tribological behavior of epoxy composites filled with nanodiamond and Ti3AlC2 -TiC particles: A comparative study

IF6.1

2019-11-01

PREAI

Manochehrian, A.; Heidarpour, A.; Mazaheri, Y.; Ghasemi, S.

Development of Cu-TiO2 surface nanocomposite by friction stir processing: Effect of pass number on microstructure, mechanical properties, tribological and corrosion behavior

IF5.6

2019-05-01

PREAI

Aghamohammadi, Hamed; Heidarpour, Akbar; Jamshidi, Rasoul; Bayat, Omid

The shape evolution of TiCX prepared by mechanical alloying of Ti-Al-C system after HF treatment

IF6.3

2019-04-01

PREAI

Heidarpour, Akbar; Mazaheri, Yousef; Roknian, Masoud; Ghasemi, Samad

Development of A356/Al2O3 + SiO2 surface hybrid nanocomposite by friction stir processing

IF5.6

2019-03-01

PREAI

Heidarpour, Akbar; Aghamohammadi, Hamed; Jamshidi, Rasoul; Ghasemi, Samad

Tribological and corrosion behavior of flame sprayed Al-10 wt% Ti3SiC2 composite coating on carbon steel

IF6.1

2019-02-01

PREAI

Jalilvand, Mohammad Mandi; Mazaheri, Yousef; Heidarpour, Akbar; Roknian, Masoud

The phase and morphological evolution of Ti3SiC2 MAX phase powder after HF treatment

IF6.1

2019-01-01

PREAI

Jamshidi, R.; Bayat, O.; Heidarpour, A.

A novel approach to in situ synthesis of WC-Al2O3 composite by high energy reactive milling

IF5.6

2018-10-01

PREAI

Aghamohammadi, Hamed; Heidarpour, Akbar; Jamshidi, Rasoul

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2017-04-01

PREAI

Heidarpour, A.; Shahin, N.; Kazemi, Sh.

Comparison of anti-corrosive properties between hot alkaline nitrate blackening and hydrothermal blackening routes

In situ fabrication mechanism of a dense Sr and Ca doped lanthanum chromite interconnect on Ni-YSZ anode of a solid oxide fuel cell during co-sintering

IF6.3

2016-08-01

PREAI

Fattah-alhosseini, A.; Khan, H. Yazdani; Heidarpour, A.

Synthesis and sintering of Sr- and Ca-doped lanthanum chromite ultrafine powder for SOFC interconnect

IF5.6

2013-03-01

PREAI

Heidarpour, A.; Saidi, A.; Abbasi, M. H.; Choi, G. M.

JOURNAL OF MATERIALS SCIENCE

IF3.9

2012-09-19

PREAI

Heidarpour, A.; Abbasi, M. H.; Saidi, A.; Choi, G. M.

A novel approach to co-sintering of doped lanthanum chromite interconnect on Ni-YSZ anode substrate for SOFC applications

Bulk Al-Zn/Al2O3 nanocomposite prepared by reactive milling and hot pressing methods

IF6.3

2012-01-01

PREAI

Heidarpour, A.; Choi, G. M.; Abbasi, M. H.; Saidi, A.