Marek Smaga - Publications, H-index & Citations

Marek Smaga

rptu

20H指数

121论文数

1.4K被引数

收录论文 30

发表时间

Conversion of displacement-controlled VHCF test data to total strain-life curves for metastable austenitic stainless steels at room temperature and 300 °C 在室温及300 °C下，将位移控制的超高周疲劳测试数据转换为奥氏体不锈钢的总应变-寿命曲线

International Journal of Fatigue

IF6.8

2026-07-22

PREAI

Elen Regitz; Marek Smaga; Tilmann Beck; Georg Veile; Stefan Weihe

Investigation of the deformation-induced α′-martensite formation of metastable austenitic stainless steel AISI 347 by high-velocity particle collisions 通过高速粒子碰撞对AISI 347奥氏体不锈钢变形诱导α′-马氏体形成的研究

Advanced Powder Technology

IF4.2

2025-10-23

OAAI

M. Bozoglu; D. Misiulia; Y. Sinnwell; T. Zhu; M. Smaga; T. Beck; S. Antonyuk

High cycle fatigue behavior and magnetic domain structure of non-oriented and grain-oriented electrical steels at Rσ = 0.1 and Rσ = −1 高周疲劳行为及无取向和取向电工钢在Rσ = 0.1和Rσ = −1时的磁畴结构

International Journal of Fatigue

IF6.8

2025-08-22

OAAI

C. Backes; M. Smaga; T. Beck

Comparison of experimental and numerical fatigue life of austenitic stainless steel components at 300 °C with idealized and scanned weld geometries 在300 °C下具有理想和扫描的焊缝几何形状的奥氏体不锈钢部件的实验和数值疲劳寿命的比较

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2025-06-01

OAAI

Veile, Georg; Lotz, Julius; Rudolph, Juergen; Regitz, Elen; Smaga, Marek; Weihe, Stefan; Beck, Tilmann

Characterization of the milling-induced hardness gradient in the near-surface material volume of high manganese TWIP steel 1.7401 by nanoindentation 通过纳米压痕法表征高锰TWIP钢1.7401近表面材料体积中铣削诱导的硬度梯度

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2025-06-01

PREAI

Wolke, S.; Smaga, M.; Beck, T.

Influence of surface morphologies and defects on the high cycle fatigue life of high manganese TWIP steel 表面形貌和缺陷对高锰TWIP钢高周疲劳寿命的影响

International Journal of Fatigue

IF6.8

2025-05-29

PREAI

Stefan Wolke; Marek Smaga; Tilmann Beck

Influences of the metastability of austenitic stainless steels on the wear behavior in a radial shaft seal system 奥氏体不锈钢亚稳态对其在径向轴封系统中的磨损行为的影响

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2025-05-01

OAAI

Zhu, Tong; Smaga, Marek; Schollmayer, Tim; Burkhart, Christoph; Koch, Oliver; Thielen, Stefan; Beck, Tilmann

Very high cycle fatigue of austenitc stainless steels and their welds for reactor internals at ambient trmperature and 300 °C

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING

IF3.5

2024-12-01

OAAI

Smaga, Marek; Daniel, Tobias; Regitz, Elen; Beck, Tilmann; Schopf, Tim; Veile, Georg; Weihe, Stefan; Rudolph, Juergen; Fischer, Udo

Influence of the as-built surface and a T6 heat treatment on the fatigue behavior of additively manufactured AlSi10Mg

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-10-01

OAAI

Lehner, Patrick; Blinn, Bastian; Zhu, Tong; Al-Zuhairi, Ali; Smaga, Marek; Teutsch, Roman; Beck, Tilmann

Experimental investigation of fracture mechanism in organically modified silica-based coating applied on austenitic stainless steel AISI 904L under monotonic and very high cycle fatigue loading

THEORETICAL AND APPLIED FRACTURE MECHANICS

IF5.6

2024-10-01

OAAI

Falakboland, Shirin; Szczurek, Jolanta; Krzak, Justyna; Lesiuk, Grzegorz; Smaga, Marek

Bending fatigue behavior of metastable and stable austenitic stainless steels with different surface morphologies

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2024-09-30

OAAI

Zhu, Tong; Smaga, Marek; Bozoglu, Mustafa; Sala, Siva Teja; Kashaev, Nikolai; Antonyuk, Sergiy; Beck, Tilmann

Investigations of Metallurgical Differences in AISI 347 and Their Influence on Deformation and Transformation Behaviour and Resulting Fatigue Life

MATERIALS

IF3.2

2024-09-16

OAAI

Veile, Georg; Regitz, Elen; Smaga, Marek; Weihe, Stefan; Beck, Tillmann

Mechanical and functional fatigue of non-oriented and grain-oriented electrical steels 无取向和晶粒取向电工钢的机械和功能乏力

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2024-09-01

OAAI

Backes, Constanze; Smaga, Marek; Beck, Tilmann

Microstructure and magnetic domain structure of additively manufactured Fe-Si soft magnetic alloys with 3 and 9 wt.-% Si

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-03-01

OAAI

Backes, C.; Kahlertb, M.; Vollmer, M.; Smaga, M.; Niendorf, T.; Beck, T.

Plasticity in cyclic indentation of a Cu-Zr-based bulk metallic glass after tensile loading: An experimental and molecular dynamics simulation study

JOURNAL OF NON-CRYSTALLINE SOLIDS

IF3.5

2023-10-01

PREAI

Avila, Karina E.; Vardanyan, Vardan Hoviki; Zhu, Tong; Kuechemann, Stefan; Smaga, Marek; Urbassek, Herbert M.

Nano-twinning and uncommon ??-martensite formation as a result of very high cycle fatigue of metastable austenitic stainless steel at 573 K 纳米孪生和不常见？？-由于亚稳态奥氏体不锈钢在573 K时的高循环乏力而形成马氏体

SCRIPTA MATERIALIA

IF5.6

2023-07-01

OAAI

Smaga, Marek; Sorich, Andreas; Daniel, Tobias; Beck, Tilmann; Kohler, Christopher; Soppa, Ewa; Speicher, Magdalena

Fatigue behavior and lifetime assessment of an austenitic stainless steel in the VHCF regime at ambient and elevated temperatures

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

IF3.2

2023-02-08

OAAI

Schopf, Tim; Weihe, Stefan; Daniel, Tobias; Smaga, Marek; Beck, Tilmann

Detection of Microstructural Changes in Metastable AISI 347, HSS Z-M4 and Tool Steel Ferrotitanit WFN by Mechanical Loss Coefficient at Ultrasonic Frequencies

MATERIALS

IF3.2

2022-08-30

OAAI

Liesegang, Moritz; Daniel, Tobias; Jaeckels, Benedikt; Smaga, Marek; Beck, Tilmann

Micromagnetic and Microstructural Characterization of Ferromagnetic Steels in Different Heat Treatment Conditions

SENSORS

IF3.5

2022-06-11

OAAI

Ankener, Werner; Boettger, David; Smaga, Marek; Gabi, Yasmine; Strass, Benjamin; Wolter, Bernd; Beck, Tilmann

On the influence of cyclic loadings on the magnetic permeability of ferritic-pearlitic AISI 1045 steel

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2022-06-01

PREAI

Deldar, S.; Smaga, M.; Beck, T.

研究方向