The Influence of Process Parameters in Radial Ring Rolling on Steel Ring OvalizationMaterialsIF3.22026-01-260OAAI
Research the Dimensional Accuracy of C45 Steel Ring Forgings Produced by Radial RollingMATERIALSIF3.22023-12-194OAAI
Evaluation of the impact of electron beam welding parameters on the mechanical properties and microstructure of the resulting joint for 39CrMoV13 and M50NiL steel gradesARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42022-09-120OA
Determination of the Critical Value of Material Damage in a Cross Wedge Rolling TestMATERIALSIF3.22021-03-245OAAI
The Influence of the Drawing Process on the Mechanical Properties of TRIP Steel Wires with 0.4% C ContentMATERIALSIF3.22020-12-174OAAI
Theoretical and Experimental Analysis of a New Process for Forming Flanges on Hollow PartsMATERIALSIF3.22020-09-1510OAAI
Effect of the Forming Zone Length on Helical Rolling Processes for Manufacturing Steel BallsMATERIALSIF3.22019-09-095OAAI
Flange formation in aluminium alloy EN AW 6060 tubes by radial extrusion with the use of a limit ring使用限位环通过径向挤压在铝合金EN AW 6060管中形成法兰ARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42019-08-0117PREAI
Recent development trends in metal formingARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42019-05-01124PREAI
Critical Damage Values of R200 and 100Cr6 Steels Obtained by Hot Tensile TestingMATERIALSIF3.22019-03-275OAAI
Forging of Mg/Al bimetallic handle using explosive welded feedstockARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42018-02-0115PREAI
The influence of tool geometry on the course of flanges radial extrusion in hollow partsARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42017-09-0112PREAI
A new process for the forming of a triangular flange in hollow shafts from Ti6Al4V alloyARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42015-09-0113PREAI
Producing hollow drive shafts by rotary compressionARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42015-09-0139PREAI
Theoretical analysis of rolling-extrusion process of axi-symmetrical partsARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42008-01-016PREAI
Cross rolling of parts with non-circular cross section非圆截面零件的交叉轧制ARCHIVES OF CIVIL AND MECHANICAL ENGINEERINGIF4.42008-01-019PREAI
Forming process of valve drop forging with three cavitiesJOURNAL OF MATERIALS PROCESSING TECHNOLOGYIF7.52006-07-0123PREAI
The research of forging process of eccentric part on three slide forging pressJOURNAL OF MATERIALS PROCESSING TECHNOLOGYIF7.52006-07-018PREAI