Werner Daves - Publications, H-index & Citations

Werner Daves

material center leoben forschung gmbh

24H指数

80论文数

1.4K被引数

收录论文 31

发表时间

Efficient 3D finite element modeling of elasto-plastic Hertzian contact of two crossed cylinders with varying contact ellipses after high cycles 高周循环后，两交叉圆柱体弹塑性赫兹接触的3D有限元高效建模，其中接触椭圆随循环变化。

Tribology International

IF6.9

2025-06-20

PREAI

Sebastian Gapp; Dominik Otipka; Jürgen Maierhofer; Werner Daves; Thomas Antretter

Wear mechanisms and transitions in advanced railway materials- a twin disc benchmark of Mn13, CrB1400 and R400HT

WEAR

IF6.1

2025-03-01

PREAI

Gapp, Sebastian; Schnalzger, Georg; Maierhofer, Juergen; Daves, Werner; Yildirimli, Kazim; Lewis, Roger; Ossberger, Uwe; Bucher, Christian; Titze, Thomas

A whole system model framework to predict damage in turnouts

VEHICLE SYSTEM DYNAMICS

IF3.9

2021-10-24

OAAI

Six, K.; Sazgetdinov, K.; Kumar, N.; Muller, G.; Velic, D.; Daves, W.; Skrypnyk, R.; Palsson, B. A.

Thermal crack formation in TiCN/α-Al2O3 bilayer coatings grown by thermal CVD on WC-Co substrates with varied Co content 通过热CVD在Co含量变化的wc-co衬底上生长的TiCN/α-Al2O3双层涂层中的热裂纹形成

SURFACE & COATINGS TECHNOLOGY

IF6.1

2020-06-01

PREAI

Stylianou, Rafael; Velic, Dino; Daves, Werner; Ecker, Werner; Tkadletz, Michael; Schalk, Nina; Czettl, Christoph; Mitterer, Christian

Experimentally validated calculation of the cutting edge temperature during dry milling of Ti6Al4V

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2020-04-01

PREAI

Nemetz, A. W.; Daves, W.; Kluensner, T.; Praetzas, C.; Liu, W.; Teppernegg, T.; Czettl, C.; Haas, F.; Boelling, C.; Schaefer, J.

Stress relaxation through thermal crack formation in CVD TiCN coatings grown on WC-Co with different Co contents

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2020-01-01

PREAI

Stylianou, Rafael; Velic, Dino; Daves, Werner; Ecker, Werner; Stark, Andreas; Schell, Norbert; Tkadletz, Michael; Schalk, Nina; Czettl, Christoph; Mitterer, Christian

Shot peening-induced plastic deformation of individual phases within a coated WC-Co hard metal composite material including stress-strain curves for WC as a function of temperature

SURFACE & COATINGS TECHNOLOGY

IF6.1

2019-12-01

PREAI

Faksa, Lukas; Daves, Werner; Kluensner, Thomas; Maier, Kathrin; Antretter, Thomas; Czettl, Christoph; Ecker, Werner

Analysis of rail milling as a rail maintenance process: Simulations and experiments

WEAR

IF6.1

2019-11-01

PREAI

Kubin, Wilhelm; Daves, Werner; Stock, Richard

Investigation of deformation mechanisms in manganese steel crossings using FE models

TRIBOLOGY INTERNATIONAL

IF6.9

2019-10-01

PREAI

Wiedorn, Julian; Daves, Werner; Ossberger, Uwe; Ossberger, Heinz; Pletz, Martin

Cyclic plastic deformation of rails in rolling/sliding contact -quasistatic FE calculations using different plasticity models

WEAR

IF6.1

2019-10-01

PREAI

Pletz, Martin; Meyer, Knut Andreas; Kunstner, David; Scheriau, Stephan; Daves, Werner

Advanced maintenance strategies for improved squat mitigation

WEAR

IF6.1

2019-10-01

PREAI

Stock, Richard; Kubin, Wilhelm; Daves, Werner; Six, Klaus

Effect of shot peening on residual stresses and crack closure in CVD coated hard metal cutting inserts

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2019-08-01

PREAI

Faksa, Lukas; Daves, Werner; Ecker, Werner; Kluensner, Thomas; Tkadletz, Michael; Czettl, Christoph

Analysis of crack growth under rolling-sliding contact

INTERNATIONAL JOURNAL OF FATIGUE

IF6.8

2019-04-01

PREAI

Daves, W.; Kracalik, M.; Scheriau, S.

Cyclic heat-up and damage-relevant substrate plastification of single- and bilayer coated milling inserts evaluated numerically

SURFACE & COATINGS TECHNOLOGY

IF6.1

2019-02-01

PREAI

Nemetz, Andreas W.; Daves, Werner; Kluensner, Thomas; Ecker, Werner; Schaefer, Jonathan; Czettl, Christoph; Antretter, Thomas

Numerical assessment of materials used in railway crossings by predicting damage initiation - Validation and application

WEAR

IF6.1

2018-11-01

PREAI

Wiedorn, Julian; Daves, Werner; Ossberger, Uwe; Ossberger, Heinz; Pletz, Martin

FE temperature- and residual stress prediction in milling inserts and correlation with experimentally observed damage mechanisms

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2018-06-01

PREAI

Nemetz, Andreas W.; Daves, Werner; Kluensner, Thomas; Ecker, Werner; Teppernegg, Tamara; Czettl, Christoph; Krajinovic, Ivan

Simplified explicit finite element model for the impact of a wheel on a crossing - Validation and parameter study

TRIBOLOGY INTERNATIONAL

IF6.9

2017-07-01

PREAI

Wiedorn, Julian; Daves, Werner; Ossberger, Uwe; Ossberger, Heinz; Pletz, Martin

A finite element model to simulate the physical mechanisms of wear and crack initiation in wheel/rail contact

WEAR

IF6.1

2016-11-01

PREAI

Daves, W.; Kubin, W.; Scheriau, S.; Pletz, M.

Finite element study of the influence of hard coatings on hard metal tool loading during milling

SURFACE & COATINGS TECHNOLOGY

IF6.1

2016-10-01

OAAI

Krajinovic, Ivan; Daves, Werner; Tkadletz, Michael; Teppernegg, Tamara; Kluensner, Thomas; Schalk, Nina; Mitterer, Christian; Tritremmel, Christian; Ecker, Werner; Czettl, Christoph

Application of 2D finite element analysis to compare cracking behaviour in twin-disc tests and full scale wheel/rail experiments

WEAR

IF6.1

2016-01-01

PREAI

Kracalik, M.; Trummer, G.; Daves, W.

研究方向