Amol A. Gokhale - Publications, H-index & Citations

Amol A. Gokhale

indian institute of technology bombay

29H指数

132论文数

2.5K被引数

收录论文 39

发表时间

Strain-Induced Martensitic Transformation During Uniaxial Tension and Low Cycle Fatigue in a 0.4% C Direct Quenched and Partitioned Martensitic Steel 应变诱导的马氏体相变在0.4% C直接淬火和分配马氏体钢的单轴拉伸和低周疲劳过程中的表现

Advanced Engineering Materials

IF3.3

2026-07-05

PREAI

Dipak Dhanke; Tanmayee Bhadange; Sushil K. Mishra; Mainak Saha; T. Sasaki; Sumit Ghosh; Mahesh C. Somani; Amol A. Gokhale

Analysis of laser-induced surface damage of single-crystal Ni-based superalloy towards improving machinability 单晶镍基高温合金表面激光损伤改善切削加工性分析

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2024-05-01

PREAI

Nandam, Srinivasa Rao; Rao, A. Venugopal; Marla, Deepak; Gokhale, Amol A.; Joshi, Suhas S.

Investigation of shock transmission and amplification/mitigation in aluminium foams

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

IF0

2023-06-04

PREAI

Dey, Chitralekha; Gokhale, Amol A. A.; Sahu, Shiba N. N.

Surface hardening through oxygen diffusion in niobium: The defining role of stress inhomogeneity in tensile embrittlement

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2023-04-01

PREAI

Dhole, Ashish; Patra, Anirban; Gupta, Rohit Kumar; Gokhale, Amol; Samajdar, Indradev

Orientation dependent interface morphology and oxide stability in a commercial niobium alloy: Explaining experimental results with density functional theory

ACTA MATERIALIA

IF9.3

2022-05-01

PREAI

Dhole, Ashish; Bhattacharya, Amrita; de Kloe, Rene; Gupta, Rohit Kumar; Gokhale, Amol A.; Samajdar, I

Fracture toughness characteristics of thermo-mechanically rolled direct quenched and partitioned steels

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2022-04-01

PREAI

Kumar, Gaurav; Ghosh, Sumit; Pallaspuro, Sakari; Somani, Mahesh C.; Komi, Jukka K.; Mishra, Sushil A.; Gokhale, Amol

Elimination of Composition Segregation in 33Al-45Cu-22Fe (at.%) Powder by Two-Stage High-Energy Mechanical Alloying

MATERIALS

IF3.2

2022-03-11

OAAI

Tikhov, Serguei; Valeev, Konstantin; Cherepanova, Svetlana; Zaikovskii, Vladimir; Salanov, Aleksei; Sadykov, Vladislav; Dudina, Dina; Lomovsky, Oleg; Petrov, Sergey; Smorygo, Oleg; Gokhale, Amol

The role of the metal-oxide Interface's terminating layer on the selective cold cracking of a commercial Niobium-Hafnium-Titanium (C-103) alloy

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2021-03-01

PREAI

Dhole, Ashish; Bhattacharya, Amrita; Gupta, Rohit Kumar; Gokhale, Amol A.; Samajdar, I

Laser surface treatment of α-β titanium alloy to develop a β -rich phase with very high hardness

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2021-02-01

PREAI

Chauhan, Alok Singh; Jha, Jyoti S.; Telrandhe, Sagar; Srinivas, V; Gokhale, Amol A.; Mishra, Sushil K.

Evaluation of optimum foam density for effective design of blast absorbers

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

IF0

2020-06-04

PREAI

Dey, Chitralekha; Thorat, Mahesh; Sahu, Shiba N.; Akella, Kiran; Gokhale, Amol A.

Additive laser deposition of compositionally graded NiCrAlY-YSZ multi-materials on IN625-NiCrAlY substrate 在IN625-NiCrAlY衬底上添加激光沉积成分梯度的NiCrAlY-YSZ多材料

MATERIALS CHARACTERIZATION

IF5.5

2020-06-01

PREAI

Savitha, U.; Reddy, G. Jagan; Singh, Vajinder; Gokhale, A. A.; Sundararaman, M.

Ultra-low density epoxy/polystyrene foam composite with high specific strength and pseudo-plastic behavior

COMPOSITES COMMUNICATIONS

IF7.7

2019-10-01

PREAI

Smorygo, Oleg; Gokhale, Amol A.; Vazhnova, Anastasia; Stefan, Adriana

Additive laser deposition of YSZ on Ni base superalloy for thermal barrier application

SURFACE & COATINGS TECHNOLOGY

IF6.1

2018-11-01

PREAI

Savitha, U.; Srinivas, V.; Reddy, G. Jagan; Gokhale, Amol A.; Sundararaman, M.

Effect of TiB2 and ZrB2 additions on structure and properties of Fe-7Al based light weight steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2017-06-01

PREAI

Khaple, Shivkumar; Prasad, V. V. Satya; Golla, Brahma Raju; Baligidad, R. G.; Gokhale, A. A.

Bubble Size Distribution in Foaming of Liquid Aluminum and the Role of Coarsening and Coalescence

ADVANCED ENGINEERING MATERIALS

IF3.3

2017-04-07

PREAI

Sahu, Shiba Narayan; Gokhale, Amol Anant; Mehra, Anurag

Microstructure, oxidation resistance and tensile properties of silicide coated Nb-alloy C-103

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2015-10-01

PREAI

Sankar, M.; Prasad, V. V. Satya; Baligidad, R. G.; Alam, Md. Z.; Das, D. K.; Gokhale, A. A.

Chemical analysis, structure and mechanical properties of discrete and compositionally graded SS316-IN625 dual materials 离散和组成分级的SS316-IN625二元材料的化学分析，结构和力学性能

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2015-10-01

PREAI

Savitha, U.; Reddy, G. Jagan; Venkataramana, A.; Rao, A. Sambasiva; Gokhale, A. A.; Sundararaman, M.

Effect of vacuum arc remelting and processing parameters on structure and properties of high purity niobium

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

IF4.6

2015-05-01

PREAI

Sankar, M.; Prasad, V. V. Satya; Baligidad, R. G.; Gokhale, A. A.

Effect of SiC particle content on foaming and mechanical properties of remelted and diluted A356/SiC composite

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2014-03-01

PREAI

Kumar, N. V. Ravi; Rao, N. Ramachandra; Gokhale, A. A.

Modeling nucleation and growth of bubbles during foaming of molten aluminum with high initial gas supersaturation

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

IF7.5

2014-01-01

PREAI

Sahu, S. N.; Gokhale, A. A.; Mehra, Anurag

研究方向