Reliability and lifetime of lithium disilicate, 3Y-TZP, and 5Y-TZP zirconia crowns with different occlusal thicknessesCLINICAL ORAL INVESTIGATIONSIF3.12023-04-0610OA
Effect of sintering temperature on microstructure, flexural strength, and optical properties of a fully stabilized monolithic zirconiaJOURNAL OF PROSTHETIC DENTISTRYIF4.82020-11-0131PREAI
The mechanical behavior of high-translucent monolithic zirconia after adjustment and finishing procedures and artificial agingJOURNAL OF PROSTHETIC DENTISTRYIF4.82020-02-0133PREAI
Does airborne-particle abrasion before, rather than after, zirconia sintering lead to higher mechanical strength even under aging challenge?JOURNAL OF PROSTHETIC DENTISTRYIF4.82020-01-012OAAI
Effect of the aging of titanium and zirconia abutment surfaces on the viability, adhesion, and proliferation of cells and the adhesion of microorganismsJOURNAL OF PROSTHETIC DENTISTRYIF4.82019-12-0116PREAI
Effect of grinding and polishing on the roughness and fracture resistance of cemented CAD-CAM monolithic materials submitted to mechanical agingJOURNAL OF PROSTHETIC DENTISTRYIF4.82019-05-0121PREAI
Effect of surface treatments on repair with composite resin of a partially monoclinic phase transformed yttrium-stabilized tetragonal zirconiaJOURNAL OF PROSTHETIC DENTISTRYIF4.82018-02-0119OAAI
Influence of Particle and Air-Abrasion Moment on Y-TZP Surface Characterization and Bond StrengthJOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRYIF3.62017-12-1310OAAI
Effect of surface treatments on the shear bond strength of luting cements to Y-TZP ceramicJOURNAL OF PROSTHETIC DENTISTRYIF4.82015-03-0136PREAI
IMPROVEMENT TO THE MARGINAL COPING FIT OF COMMERCIALLY PURE TITANIUM CAST IN PHOSPHATE-BONDED INVESTMENT BY USING A SIMPLE PATTERN COATING TECHNIQUEJOURNAL OF PROSTHETIC DENTISTRYIF4.82012-07-013PREAI
THE INFLUENCE OF SHORT-HEATING-CYCLE INVESTMENTS ON THE QUALITY OF COMMERCIALLY PURE TITANIUM CASTINGSJOURNAL OF PROSTHETIC DENTISTRYIF4.82010-10-0111PREAI
The Effect of Coating Patterns with Spinel-Based Investment on the Castability and Porosity of Titanium Cast into Three Phosphate-Bonded InvestmentsJOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRYIF3.62010-08-1611PREAI
EFFECT OF METAL PRIMERS ON BOND STRENGTH OF RESIN CEMENTS TO BASE METALSJOURNAL OF PROSTHETIC DENTISTRYIF4.82009-04-0146PREAI
Evaluation of the thermal shrinkage of titanium and the setting and thermal expansion of phosphate-boded investmentsJOURNAL OF PROSTHETIC DENTISTRYIF4.82007-07-0110PREAI
Shear bond strength of metal-ceramic repair systemsJOURNAL OF PROSTHETIC DENTISTRYIF4.82006-09-0170PREAI
Effect of thermal treatments on tensile strength of commercially cast pure titanium and Ti-6Al-4V alloysJOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINEIF4.52005-08-0112PREAI
Comparison of the tensile bond strengths of cast metal crowns luted with resin cementsJOURNAL OF ORAL REHABILITATIONIF42004-11-0115PREAI
Effect of disinfectant agents on dimensional stability of elastomeric impression materialsJOURNAL OF PROSTHETIC DENTISTRYIF4.81999-05-0152PREAI