Zhimin Zhang

north university of china

H指数:27

被引数:1,945

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Effect of strain-gradient-driven heterogeneous evolution of LPSO phases on dynamic recrystallization and strengthening of a Mg-RE alloy

应变梯度驱动的LPSO相异质演化对Mg-RE合金动态再结晶和强化的影响

Journal of Rare Earths

IF7.2

2026-09-050

PRE

The influence of multi-scale initial secondary phases on the microstructure and mechanical properties of extruded VW124A alloy

多尺度初始次生相对挤压VW124A合金微观结构和力学性能的影响

Journal of Alloys and Compounds

IF6.3

2025-10-270

PRE

Microstructural evolution and mechanical properties of an Al-10Zn-3Mg-2.5Cu alloy processed by stress-aging coupled artificial aging

应力时效与人工时效耦合处理的Al-10Zn-3Mg-2.5Cu合金微观结构演化及力学性能

Materials & Design

IF7.9

2025-10-220

OAAI

Correlation of breakage characteristics between single-particle and uniformly-graded volcanic soil: Insights from compression tests

单颗粒与均质级配火山土壤破碎特性之间的相关性：压缩试验的见解

Powder Technology

IF4.6

2025-09-030

PRE

Effect of different preheating treatments on dynamic recrystallization behavior of hot-compressed Mg−Gd−Y−Zn−Zr alloy

不同预热处理对热压缩Mg−Gd−Y−Zn−Zr合金动态再结晶行为的影响

Transactions of Nonferrous Metals Society of China

IF4.7

2025-08-290

OAAI

The analysis of fracture toughness and fracture mechanism of Mg-Gd-Y-Zn-Zr alloy under different temperatures

在不同温度下Mg-Gd-Y-Zn-Zr合金的断裂韧性及断裂机制分析

Journal of Alloys and Compounds

IF6.3

2025-08-040

PRE

Preparation of ultra-high strength Mg-12.8Gd-3.8Y-1.9Zn-0.5Zr alloys by varying the extrusion temperature combined with pre-deformation-ageing treatment

通过改变挤压温度并结合预变形-时效处理制备超高强度Mg-12.8Gd-3.8Y-1.9Zn-0.5Zr合金

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2025-06-030

PRE

Equivariant graph neural network-based accurate and ultra-fast virtual screening of small molecules targeting miRNA-protein complex

基于等变图神经网络的高精度、超快速小分子靶向miRNA-蛋白质复合物的虚拟筛选

Journal of Pharmaceutical Analysis

IF8.9

2025-05-150

OAAI

The twinning and DRX mechanisms of AZ31 Mg alloy by comparing compressive/shear/compressive-shear deformation

通过比较压缩/剪切/压缩-剪切变形，研究AZ31 Mg合金的孪生和DRX机制。

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-05-010

PRE

Effect of different temperature on the fracture toughness and fracture behavior of Mg-9.46Gd-3.96Y-2.34Zn-0.42Zr alloy cylindrical component for aerospace applications

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2025-03-010

PRE

High strength and high ductility Mg-Gd-Y-Zn-Zr alloys obtained by controlling texture and dynamic precipitation through LPSO phase structure of different initial morphologies

JOURNAL OF RARE EARTHS

IF7.2

2024-12-010

PRE

Synergistic enhancement of strength and ductility of Mg-12.8Gd-3.8Y-1.9Zn-0.5Zr alloy by low-temperature solid solution treatment during forging process

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2024-12-010

PRE

Enhancement of hardness and high-temperature wear resistance of laser-clad CoAlTiWTa RHEA coating on inconel 718 superalloy by addition of TiC

JOURNAL OF MATERIALS SCIENCE

IF3.9

2024-09-261

PRE

Effect of annealing treatment on the homogeneity of microstructure and mechanical properties in Mg-Gd-Y-Zn-Zr rotary backward extruded tubular

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2024-03-014

PRE

Influence of laser power on microstructure and high-temperature tribological properties of CoAlTiWTa RHEA coating on Inconel 718 superalloy

SURFACE & COATINGS TECHNOLOGY

IF6.1

2024-03-0112

PRE

Deformation behavior of LPSO phases, grain refinement mechanism, and texture evolution of a Mg-Gd-Y-Zn-Zr alloy processed by forward extrusion combined with dual-directional angular deformation

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2024-01-019

OAAI

The effect of hydrostatic pressure on grain refinement and deformation behaviors of Mg-Gd-Y-Zn-Zr alloy under complex shear stress

复杂剪切应力下静水压力对mg-gd-y-zn-zr合金晶粒细化及变形行为的影响

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-09-019

OAAI

Optimization in strength-ductility of Mg-RE-Zn alloy based on different repetitive upsetting extrusion deformation paths

基于不同重复镦粗挤压变形路径的mg-re-zn合金强韧性优化

MATERIALS & DESIGN

IF7.9

2023-08-0116

OAAI

Evolution of microstructure, texture and mechanical properties of AZ80 Mg alloy tubular produced by rotating backward extrusion with modified open punch

改进开式冲头旋转反挤压AZ80镁合金管材的组织、织构和力学性能演变

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T

IF6.6

2023-05-017

OAAI

Texture evolution and effect on mechanical properties of repetitive upsetting-extruded and heat treatment Mg-Gd-Y-Zn-Zr alloy containing LPSO phases

JOURNAL OF ALLOYS AND COMPOUNDS

IF6.3

2023-03-0125

PRE

Zhimin Zhang

个人简介

教育背景

工作经历

荣誉奖项

研究方向