Ali Hosseini - Publications, H-index & Citations

Ali Hosseini

ontario tech university

17H指数

75论文数

1.0K被引数

收录论文 18

发表时间

Constitutive modelling and machining behavior of wrought and FFF-produced stainless steels via direct and inverse parameter identification 冷轧和熔融沉积成型不锈钢的构型建模与加工行为：基于直接和逆向参数识别

CIRP Journal of Manufacturing Science and Technology

IF5.4

2026-09-29

OAAI

Mohammad Valiyan; Muhammad Asim Ghaffar; Jannis Saelzer; Ahmad Barari; Dirk Biermann; Ali Hosseini

Automated failure detection and resumption after power interruption for FFF additively manufactured parts FFF增材制造零件在断电后的自动故障检测与恢复

International Journal of Advanced Manufacturing Technology

IF3.1

2026-08-18

PREAI

Izzy Cossarin; Tim Clarke; Fereydoon Diba; Ali Hosseini

Effect of process-induced anisotropy on flow stress characterization and chip formation in the machining of extrusion-based additively manufactured stainless steels 挤压增材制造不锈钢加工中工艺诱导各向异性对流动应力表征和切屑形成的影响

CIRP Annals

IF0

2026-05-01

OAAI

Ali Hosseini; Mohammad Valiyan; Muhammad Asim Ghaffar; Jannis Saelzer; Sebastian Berger; Ahmad Barari; Hossam A. Kishawy; Dirk Biermann

Evaluating different methods to measure porosity in fused filament fabricated metals 评估不同测量熔融沉积成型金属孔隙率的方法

TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING

IF1

2025-12-01

PREAI

Porrang, Bita; Ghaffar, Muhammad Asim; Hosseini, Ali

Enhancing yield prediction of FFF materials with modified Tsai–Wu failure criterion 采用改进的Tsai–Wu失效准则提升FFF材料的产量预测

The International Journal of Advanced Manufacturing Technology

IF0

2025-11-06

PREAI

Tim Clarke; Ali Hosseini

Look-ahead stress-oriented trajectory planning to improve the strength of fused filament fabricated parts 前瞻性应力导向轨迹规划以提升熔融堆积成型零件的强度

CIRP Journal of Manufacturing Science and Technology

IF5.4

2025-06-24

OAAI

Mehrdad Sadeghieh; Jannis Saelzer; Ali Hosseini; Hossam Kishawy; Dirk Biermann

Modeling the effect of microstructural porosity on the material behavior of fused filament fabricated 17-4PH stainless steel

PROGRESS IN ADDITIVE MANUFACTURING

IF5.4

2025-03-01

PREAI

Porrang, Bita; Srivastava, Surbhi; Hosseini, Ali

Modelling of yielding in additively manufactured materials using modified Tsai-Hill criterion

PROGRESS IN ADDITIVE MANUFACTURING

IF5.4

2024-06-17

PREAI

Clarke, Tim; Hosseini, Ali

Milling of additively manufactured AlSi10Mg with microstructural porosity defects, finite element modeling and experimental analysis 具有微结构孔隙缺陷的增材制造AlSi10Mg的铣削，有限元建模和实验分析

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2024-05-01

OAAI

Narayanan, Yatin Shankar; Nguyen, Nam; Hosseini, Ali

Model predictive control of an active ankle-foot orthosis with non-linear actuation constraints

CONTROL ENGINEERING PRACTICE

IF4.6

2023-07-01

PREAI

DeBoer, Benjamin; Hosseini, Ali; Rossa, Carlos

Direct calculation of Johnson-Cook constitutive material parameters for oblique cutting operations

JOURNAL OF MANUFACTURING PROCESSES

IF6.8

2023-04-01

PREAI

Nguyen, Nam; Hosseini, Ali

Machining characteristics of additively manufactured titanium, cutting mechanics and chip morphology

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2023-01-01

PREAI

Kishawy, Hossam A.; Nguyen, Nam; Hosseini, Ali; Elbestawi, Mohamed

An analytical model for the optimized design of micro-textured cutting tools

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2022-01-01

PREAI

Kishawy, Hossam A.; Salem, Amr; Hegab, Hussien; Hosseini, Ali; Elbestawi, Mohamed

Intelligent machining: a review of trends, achievements and current progress

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING

IF4

2021-02-25

PREAI

Imad, M.; Hopkins, C.; Hosseini, A.; Yussefian, N. Z.; Kishawy, H. A.

Micro-textured cutting tools: Phenomenological analysis and design recommendations

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2021-01-01

PREAI

Kishawy, Hossam A.; Salem, Amr; Hegab, Hussien; Hosseini, Ali; Balazinski, Marek

Application of a new thick zone model to the cutting mechanics during end-milling

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

IF9.4

2015-06-01

PREAI

Pang, L.; Hosseini, A.; Hussein, H. M.; Deiab, I.; Kishawy, H. A.

A low complexity DFT-matrix based pilot allocation algorithm for sparse channel estimation in OFDM systems OFDM系统中基于低复杂度DFT矩阵的稀疏信道估计导频分配算法

AEU-INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATIONS

IF3.2

2014-02-01

PREAI

Kamali, Abbas; Sahaf, Masoud Reza Aghabozorgi; Hosseini, Ali Mohammad Doost; Tadaion, Ali Akbar

An energy based analysis of broaching operation: Cutting forces and resultant surface integrity

CIRP ANNALS-MANUFACTURING TECHNOLOGY

IF3.6

2012-01-01

PREAI

Kishawy, Hossam A.; Hosseini, Ali; Moetakef-Imani, Behnam; Astakhov, Viktor P.

研究方向