logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
P

Przemysław Podulka

rzeszow university of technology

18H指数
67论文数
693被引数
收录论文 28
发表时间
logo
Nonlinear Vibration of Temperature-Dependent FGM Beams with Symmetric and Asymmetric Boundary Conditions via the Generalized Differential Quadrature Method基于广义微分求积法的温度相关FGM梁在对称和非对称边界条件下的非线性振动
errComputation
IF1.9
err2026-05-18
err0
PREAI
errAltaee, Malik K.; Hamad, Azhar G.; Alhussein, Thamer H.; Al Rjoub, Yousef S.; Firouzi, Nasser; Podulka, Przemyslaw
err分享
err收藏
Nonlinear Deformation Analysis of Sandwich Timoshenko Beams with Carbon Nanotube Reinforced Face Sheets and Re-Entrant Core Using GDQ Method基于GDQ方法对碳纳米管增强面板和凹入芯层的夹层Timoshenko梁的非线性变形分析
errMathematics
IF2.2
err2026-02-11
err0
errOAAI
errHamad, Azhar G.; Aswed, Khaldon K.; Al Rjoub, Yousef; Firouzi, Nasser; Podulka, Przemyslaw
err分享
err收藏
The effect of chemical treatment on contact angle and surface roughness parameters化学处理对接触角和表面粗糙度参数的影响
errJournal of Adhesion
IF2.3
err2026-01-01
err0
PREAI
errRudawska, Anna; Miturska-Baranska, Izabela; Szabelski, Jakub; Podulka, Przemyslaw; Olewnik-Kruszkowska, Ewa; da Silva, Lucas F. M.; Wahab, Magd A.
err分享
err收藏
Flow and Heat Transfer in Porous Media Under Non-Standard Asymmetric Boundary Conditions多孔介质中非标准不对称边界条件下的流动与传热
errSymmetry-Basel
IF2.2
err2025-12-18
err0
PREAI
errFirouzi, Nasser; Djuansjah, Joy; Podulka, Przemyslaw
err分享
err收藏
A combined strain energy density and entire fracture surface approach for life prediction of short carbon fibre reinforced PEEK一种结合应变能密度和完整断裂表面方法用于短碳纤维增强PEEK的寿命预测
errInternational Journal of Structural Integrity
IF3
err2025-10-13
err0
PREAI
errWojciech Macek; Aleksandra Mirowska; Przemysław Podulka; Cho-Pei Jiang; Andrea Avanzini; Filippo Berto
err分享
err收藏
Investigating the Performance of Longitudinal Groove on Noise Reduction in a NACA0015 Hydrofoil Using Computational Fluid Dynamics使用计算流体动力学研究NACA0015翼型上纵向沟槽的降噪性能
errMATHEMATICS
IF2.2
err2025-09-30
err0
PREAI
errRaju, S. Suresh Kumar; Firouzi, Nasser; Al Mukahal, Fatemeh H. H.; Podulka, Przemyslaw
err分享
err收藏
Roughness evaluation of machined Ti-6Al-4V alloys with a study of surface topography measurement noise加工态Ti-6Al-4V合金的表面粗糙度评价及表面形貌测量噪声研究
errMeasurement
IF5.6
err2025-08-09
err0
errOAAI
errPrzemysław Podulka; Csaba Felho; Istvan Sztankovics; Lucia Knapčíková
err分享
err收藏
Fractography of Haynes 282 alloy manufactured by DMLS after tensile and HCF拉伸和HCF后DMLS制造的Haynes 282合金的断口形貌
errJOURNAL OF CONSTRUCTIONAL STEEL RESEARCH
IF4.3
err2025-06-06
err0
PREAI
errMacek, Wojciech; Sitek, Ryszard; Podulka, Przemyslaw; Lesiuk, Grzegorz; Zhu, Shun-Peng; Liu, Xiaochuan; Kopec, Mateusz
err分享
err收藏
Measurement Technique Comparison in the Entire Fracture Surface Topography Assessment for Additively Manufactured Materials
errMATERIALS
IF3.2
err2025-03-19
err0
errOAAI
errZielinski, Dawid; Mirowska, Aleksandra; Podulka, Przemyslaw; Jiang, Cho-Pei; Macek, Wojciech
err分享
err收藏
Study of vibrational surface topography measurement errors of LPBF Inconel 718 alloy after shot peening processLPBF Inconel 718合金喷丸后振动表面形貌测量误差的研究
errMEASUREMENT
IF5.6
err2025-02-01
err0
PREAI
errPodulka, Przemyslaw; Rudawska, Anna; Macek, Wojciech
err分享
err收藏
Study of etched surface topography with the compensation of contactless vibrational measurement errors
errMEASUREMENT
IF5.6
err2025-01-01
err0
PREAI
errPodulka, Przemyslaw; Knapcikova, Lucia; Tauberova, Rebeka; Marticek, Mattis; Sukic, Enes
err分享
err收藏
Roughness measurement results evaluation of 6082 aluminium alloy specimens after fatigue bending tests
errPRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
IF3.7
err2024-12-01
err2
errOAAI
errPodulka, Przemyslaw; Macek, Wojciech; Owsinski, Robert; Branco, Ricardo; Trembacz, Jaroslaw
err分享
err收藏
The Smith-Watson-Topper parameter and fracture surface topography relationship for additively manufactured 18Ni300 steel subjected to uniaxial variable-amplitude loading
errTHEORETICAL AND APPLIED FRACTURE MECHANICS
IF5.6
err2024-10-01
err8
errOAAI
errMacek, Wojciech; Marciniak, Zbigniew; Lesiuk, Grzegorz; Podulka, Przemyslaw; Jiang, Cho-Pei
err分享
err收藏
Laser-textured cross-hatched surface topography analysis with evaluation of high-frequency measurement noise带有高频测量噪声评估的激光纹理交叉阴影表面形貌分析
errMEASUREMENT
IF5.6
err2024-08-01
err5
errOAAI
errPodulka, Przemyslaw; Macek, Wojciech; Branco, Ricardo; Kubit, Andrzej
err分享
err收藏
Fracture surface topography measurements analysis of low-alloyed corrosion resistant steel after bending-torsion fatigue tests
errPRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY
IF3.7
err2024-08-01
err4
PREAI
errPodulka, Przemyslaw; Macek, Wojciech; Zima, Beata; Kopec, Mateusz; Branco, Ricardo; Achtelik, Henryk
err分享
err收藏
Evaluation of high-frequency roughness measurement errors for composite and ceramic surfaces after machining
errJOURNAL OF MANUFACTURING PROCESSES
IF6.8
err2024-07-01
err8
errOAAI
errPodulka, Przemyslaw; Macek, Wojciech; Szala, Miroslaw; Kubit, Andrzej; Das, Kinkar Chandra; Krolczyk, Grzegorz
err分享
err收藏
Saint-Venant torsion based on strain gradient theory
errINTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
IF9.4
err2024-05-01
err3
PREAI
errPodulka, Przemyslaw; Macek, Wojciech
err分享
err收藏
Evaluation of High-Frequency Measurement Errors from Turned Surface Topography Data Using Machine Learning Methods
errMATERIALS
IF3.2
err2024-03-22
err4
errOAAI
errPodulka, Przemyslaw; Kulisz, Monika; Antosz, Katarzyna
err分享
err收藏
Topography measurement methods evaluation for entire bending-fatigued fracture surfaces of specimens obtained by explosive welding
errMEASUREMENT
IF5.6
err2024-01-01
err13
errOAAI
errPodulka, Przemyslaw; Macek, Wojciech; Rozumek, Dariusz; Zak, Krzysztof; Branco, Ricardo
err分享
err收藏
Roughness evaluation of turned composite surfaces by analysis of the shape of autocorrelation function
errMEASUREMENT
IF5.6
err2023-11-01
err14
errOAAI
errPodulka, Przemyslaw; Macek, Wojciech; Zima, Beata; Lesiuk, Grzegorz; Branco, Ricardo; Krolczyk, Grzegorz
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
G
Grzegorz Królczyk
H 指数: 72 · 论文数: 379
S
Shun‐Peng Zhu
H 指数: 68 · 论文数: 321
F
F. Berto
H 指数: 59 · 论文数: 291
J
J.A.M. Ferreira
H 指数: 46 · 论文数: 468
J
J.D. Costa
H 指数: 43 · 论文数: 232
查看更多