Mustafa Borga Dönmez - Publications, H-index & Citations

Surface properties of additively manufactured biobased dental cast resins cleaned with nonhazardous postprocessing solutions 增材制造生物基牙科铸模树脂的表面性质：使用非危害性后处理溶液清洗

IF0

2026-06-15

OAAI

Mustafa Borga Donmez; Pedro Molinero-Mourelle; Gülce Çakmak; Martin Schimmel; Burak Yilmaz

Digital fit and positional trueness analysis of a crown seated on additively manufactured casts fabricated using different manufacturing trinomials and build orientations 数字化适合度和位置精确性分析：比较不同制造工艺参数和构建方向下增材制造铸模上冠座的适配性

IF0

2026-05-14

OAAI

Dr Mustafa Borga Donmez; Emilli Pantelić; Ece Ersöz; Almira Ada Diken Türksayar; Burak Yilmaz; Gülce Çakmak

The effect of toothpaste and thermal aging on extrinsically stained additively manufactured zirconia: A comparative study on surface roughness and stain durability 牙膏和热老化对增材制造氧化锆外源性着色的影响：表面粗糙度和着色耐久性的比较研究

IF5.5

2026-05-06

OAAI

Bahtınur Şencan; Mustafa Borga Dönmez; Almira Ada Diken Türksayar; Münir Demirel

Roughness and stain durability of additively manufactured zirconia after simulated erosive, abrasive, and thermal intraoral challenges 增材制造氧化锆在模拟侵蚀性、磨耗性和热性口腔环境挑战后的粗糙度和抗染色耐久性

IF1.5

2026-05-04

OAAI

Cecilia Santos Galvao DDS, MSc; Ediz Kale DDS, PhD; Mustafa Borga Donmez DDS, PhD; Özgür Ozan Tanrıkut DDS, MScD; Adriana da Fonte Porto Carreiro DDS, PhD; Richard Johannes Wierichs DDS, MHBA; Hanan Al-Johani BDS, MSD, PG Cert, PhD; Burak Yilmaz DDS, PhD

Digital fabrication accuracy and fit analysis of additively and subtractively manufactured zirconia fixed dental prostheses 增材与减材制造氧化锆固定牙科修复体的数字化制造精度及匹配性分析

IF0

2026-04-30

OAAI

Cecilia Santos Galvao; Mustafa Borga Donmez; Ediz Kale; Hanan Al-Johani; Özgür Ozan Tanrıkut; Adriana da Fonte Porto Carreiro; Burak Yilmaz

Surface roughness, stainability, and translucency of an additively manufactured interim resin reinforced with a commercially available ceramic composite concentrate after coffee thermal cycling 咖啡热循环后，增材制造临时树脂（用商用陶瓷复合浓缩物增强）的表面粗糙度、染色性和半透明性

IF5.5

2026-04-19

PREAI

Eleni Trikoili; Mustafa Borga Dönmez; null BegümÜnlü Kurşun; Zeynep Yertutan; Gülce Çakmak; Çiğdem Kahveci; Burak Yilmaz

Trueness and stability of additively manufactured removable dies: An in vitro study on plant-based resins and alcohol-free cleaning solutions 增材制造可移除印模的准确性和稳定性：一项关于植物基树脂和无酒精清洁溶液的体外研究

IF1.5

2026-04-16

OAAI

Mustafa Borga Donmez DDS, PhD; Nicolas Michel Rotter Dr med dent; Gabriela Panca Sabatini Dr med dent, MSc, PhD; Almira Ada Diken Türksayar DDS; Hyung-In Yoon DDS, PhD; Burak Yilmaz DDS, PhD

Wear, fracture strength, and reliability of three-unit definitive fixed dental prostheses fabricated with different vat polymerization methods 磨损、断裂强度和三种不同料盘聚合方法制备的固定最终义齿修复体的可靠性

IF0

2026-04-03

OAAI

Mustafa Borga Donmez; Karaca Rojan Erbil; Almira Ada Diken Tüksayar; Gülce Çakmak; Burak Yilmaz

Evaluation of surface and positional trueness of removable dies fabricated through fused filament fabrication 通过熔融丝材制造方法制备的可移除印模的表面和位置准确度评估

IF5.5

2026-03-09

OAAI

Betül Arslan Acicbe; Sevda Deniz; Mustafa Borga Dönmez; Almira Ada Diken Türksayar; Münir Demirel

Fracture strength of additively manufactured one-piece endodontic crowns in resins for definitive use: Effect of material type, margin configuration, and pulp chamber depth 增材制造的一体式根管牙冠在用于最终修复的树脂中的断裂强度：材料类型、边缘配置和髓腔深度的影响

IF5.5

2026-02-11

OAAI

Gülce Çakmak; Mustafa Borga Dönmez; Ece Ersöz; Almira Ada Diken Türksayar; Hakan Arınç; Ufuk Adali; Burak Yilmaz; Stefano Pieralli

Additively manufactured water-washable resin dies cleaned with nonhazardous solutions: Can dimensional and positional trueness be ensured?

IF0

2025-12-09

OAAI

Mustafa Borga Donmez; Ece Ersöz; Gülce Çakmak; Almira Ada Diken Türksayar; Pinar Altinci; Burak Yilmaz

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY

IF3.6

2025-12-01

OAAI

Seifert, Andre Peter; Molinero-mourelle, Pedro; Cakmak, Gulce; De Paula, Marcella Silva; Kahveci, Cigdem; Yilmaz, Burak; Donmez, Mustafa Borga

Flexural and structural behavior of additively manufactured zirconia: Influence of firing process and build orientation 增材制造氧化锆的弯曲和结构行为：烧制工艺和构建方向的影响

Trueness of merging partial arch scans using different intraoral scanners for diagnostic casts: A proof of concept 使用不同口内扫描仪合并部分牙弓扫描的准确性：一项概念验证

IF0

2025-11-10

OAAI

Gabriela Panca Sabatini; Mustafa Borga Donmez; Pedro Molinero-Mourelle; Gülce Çakmak; Mehmet Esad Güven; Ahmet Burçin Batıbay; Newton Sesma; Burak Yilmaz

Impact of plant-based resins and alcohol-free cleaning solutions on the dimensional stability of additively manufactured dental casts 植物基树脂和无酒精清洁溶液对增材制造牙科印模尺寸稳定性的影响

IF5.5

2025-11-04

OAAI

Mustafa Borga Dönmez; Christian Eng; Münir Demirel; Gülce Çakmak; Çiğdem Kahveci; Klaus Wen Lung Neuhaus; Burak Yilmaz

Are bio-based resins suitable alternatives for additively manufactured removable dies? An in vitro study on dimensional and positional trueness and stability 生物基树脂是否适用于增材制造的临时模具替代品？一项关于尺寸和位置准确性与稳定性的体外研究

IF5.5

2025-09-10

OAAI

Mustafa Borga Donmez; Isabelle Kaspari; Münir Demirel; Çiğdem Kahveci; Burak Yilmaz

Effect of material, prosthesis height, and aging on the fracture strength of additively and subtractively manufactured implant-supported cantilevered prostheses 材料、假体高度及老化对增材制造和减材制造种植体支持的悬臂式假体断裂强度的影响

IF0

2025-09-08

OAAI

Mustafa Borga Dönmez DDS, PhD; Clara Lisa Soliva Med dent; Hanan Al-Johani BDS, MSD, PG Cert, PhD; Ahmet Orgev DDS, MSc, MS; Martin Schimmel Prof Dr med dent; Gülce Çakmak DDS, PhD; Burak Yilmaz DDS, PhD

Fabrication and fit accuracy of definitive resin fixed partial dentures additively manufactured using different vat polymerization technologies 采用不同vat聚合技术的最终树脂固定局部义齿的制造与适配精度

IF0

2025-09-08

OAAI

Mustafa Borga Dönmez DDS, PhD; Paola Maldonado Dr med dent; Çiğdem Kahveci DDS, PhD; Ahmet Orgev DDS, MSc, MS; Marta Revilla-León DDS, MSD, PhD; Burak Yilmaz DDS, PhD; Gülce Cakmak DDS, PhD

Dimensional stability of additively manufactured dental casts in bio-based resins: Influence of cast base design and storage conditions 基于生物基树脂的增材制造牙科铸模的尺寸稳定性：铸模基底设计和存储条件的影响

IF5.5

2025-08-20

OAAI

Betül Arslan Acicbe; Sevda Deniz; Almira Ada Diken Türksayar; Mustafa Borga Dönmez; Münir Demirel