Srdjan Simunovic

oak ridge national laboratory

H指数:27

被引数:2,682

个人简介

暂无内容

教育背景

暂无内容

工作经历

暂无内容

荣誉奖项

暂无内容

Validation Data for Benchmarking Wire Arc Additive Manufacturing Process Simulations

用于基准测试的丝材电弧增材制造过程模拟验证数据

Advances in Simulation

IF4.7

2026-07-090

PRE

Efficient Simulation of Cascading Outages Using an Energy Function-Embedded Quasi-Steady-State Model

基于能量函数嵌入的准稳态模型的级联故障高效仿真

IEEE Transactions on Power Systems

IF7.2

2025-07-010

PRE

Integrated top-down process and voxel-based microstructure modeling for Ti-6Al-4V in laser wire direct energy deposition process

MATERIALS & DESIGN

IF7.9

2024-11-010

OAAI

Analysis and Mitigation of Cascading Failures Using a Stochastic Interaction Graph With Eigen-Analysis

郭, Z.; 苏, X.; 孙, K.; Park, B.; Simunovic, S. 基于随机交互图与特征值分析的级联故障分析与缓解。IEEE Trans. Power Syst. 2025, 40, 1675–1685. [Google Scholar] [CrossRef]

IEEE Transactions on Power Systems

IF7.2

2024-01-010

OAAI

Prediction and understanding of non-linear distortion on large curved wall manufactured by wire-arc direct energy deposition

ADDITIVE MANUFACTURING LETTERS

IF4.7

2023-12-013

OAAI

Parallel-in-Time Power System Simulation Using a Differential Transformation Based Adaptive Parareal Method

IEEE OPEN ACCESS JOURNAL OF POWER AND ENERGY

IF3.2

2023-01-013

Resilient Adaptive Parallel sImulator for griD (RAPID): An Open Source Power System Simulation Toolbox

IEEE OPEN ACCESS JOURNAL OF POWER AND ENERGY

IF3.2

2022-01-012

Examination of Semi-Analytical Solution Methods in the Coarse Operator of Parareal Algorithm for Power System Simulation

IEEE TRANSACTIONS ON POWER SYSTEMS

IF7.2

2021-11-0119

OAAI

Powder spreading, densification, and part deformation in binder jetting additive manufacturing

粘合剂喷射增材制造中的粉末铺展，致密化和零件变形

PROGRESS IN ADDITIVE MANUFACTURING

IF5.4

2021-07-2724

OAAI

Effective residual stress prediction validated with neutron diffraction method for metal large-scale additive manufacturing

MATERIALS & DESIGN

IF7.9

2021-07-0147

OAAI

Mechanical Modeling and Testing of Pouch Cells under Various Loading Conditions

袋状电池在各种负载条件下的机械建模和测试

JOURNAL OF THE ELECTROCHEMICAL SOCIETY

IF3.3

2020-10-096

PRE

Microscopic analysis of copper current collectors and mechanisms of fragmentation under compressive forces

压缩力下铜集电器的微观分析和碎裂机理

MATERIALS TODAY ENERGY

IF8.6

2020-09-019

OAAI

Modeling of deformation of battery cells using thick shell element formulation

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

IF7.3

2020-04-011

OAAI

Features of mechanical behavior of EV battery modules under high deformation rate

高变形率下电动汽车电池模块的力学行为特征

EXTREME MECHANICS LETTERS

IF4.5

2019-10-0141

OAAI

Towards an integrated experimental and computational framework for large-scale metal additive manufacturing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2019-07-0119

OAAI

Groundwater Flow Modeling in Karst Aquifers: Coupling 3D Matrix and 1D Conduit Flow via Control Volume Isogeometric AnalysisExperimental Verification with a 3D Physical Model

WATER

IF3

2018-12-0524

OAAI

Effect of packaging and cooling plates on mechanical response and failure characteristics of automotive Li-ion battery modules

封装和冷却板对汽车锂离子电池模块机械响应和失效特性的影响

JOURNAL OF POWER SOURCES

IF7.9

2018-11-0122

OAAI

Strain distribution and failure mode of polymer separators for Li-ion batteries under biaxial loading

双轴加载下锂离子电池用聚合物隔膜的应变分布和失效模式

JOURNAL OF POWER SOURCES

IF7.9

2018-02-0148

OAAI

Limiting Internal Short-Circuit Damage by Electrode Partition for Impact-Tolerant Li-Ion Batteries

通过电极隔板限制耐冲击锂离子电池的内部短路损坏

JOULE

IF35.4

2018-01-0152

OAAI

Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing (vol 112, pg 303, 2016)

ACTA MATERIALIA

IF9.3

2017-11-012

PREAI

Srdjan Simunovic

个人简介

教育背景

工作经历

荣誉奖项

研究方向