A. Bedolla-Jacuinde

universitat politecnica de catalunya

27H指数

124论文数

2.1K被引数

收录论文 37

发表时间

Modeling of the hot flow behavior and processing maps of an austenitic Fe-30Mn-8Al-1C low-density steel 奥氏体Fe-30Mn-8Al-1C低密度钢的热流行为建模及加工图

Materialwissenschaft und Werkstofftechnik

IF1.1

2026-05-01

PREAI

Garcia-Dominguez, M.; Mejia, I.; Bedolla-Jacuinde, A.; Cabrera, J. M.

Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Medium Mn Steel Sheet with Nb Addition 添加铌的中锰钢板的微观结构和力学性能受热机械加工的影响

Metal Science and Heat Treatment

IF0.5

2026-02-01

PREAI

Hernandez-Rivera, J. L.; Azpeitia, M. O. Ramos; Garay-Reyes, C. G.; Bedolla-Jacuinde, A.

Microstructural optimization and heat treatment of high-chromium white cast irons as an alternative to powder metallurgy for engine valve seats 高铬白口铸铁的微观结构优化与热处理作为粉末冶金在发动机气门座应用的替代方案

MRS Advances

IF0.9

2025-12-01

PREAI

Beltz-Perez, M. T.; Bedolla-Jacuinde, A.; Quintero-Ortiz, Josue; Guerra, F. V.; Zarate-Rangel, A.

Characterization of Cr, Nb, V, and W-modified carbidic ductile iron for enhanced wear resistance Cr, Nb, V, 和 W 改性碳化物球墨铸铁的表征以提高耐磨性

MRS Advances

IF0.9

2025-12-01

PREAI

Zarate-Rangel, A.; Bedolla-Jacuinde, A.; Guerra, F. V.; Pacheco-Cedeno, J. S.; Castro-Roman, M.

Microstructural and mechanical characterization of a liquid-liquid casting bimetallic composite of HY-80 steel and high-chromium white cast iron HY-80钢和高铬白口铸铁液液铸造双金属复合材料的微观结构与力学表征

MRS Advances

IF0.9

2025-12-01

PREAI

Quintero-Ortiz, Josue; Bedolla-Jacuinde, Arnoldo; Beltz-Perez, Maria Trinidad; Guerra-Lopez, Francisco Vapeani; Zarate-Rangel, Adan

Effect of dynamic solidification and titanium additions on the microstructure and abrasion resistance of high-chromium white cast iron 动态凝固和钛添加对高铬白口铸铁显微组织和耐磨性的影响

MRS ADVANCES

IF0.9

2025-11-01

PREAI

Arredondo-Flores, V.; Bedolla-Jacuinde, A.; Del Pozo, A.; Cortes-Carrillo, E.

The influence of processing routes on the microstructure and mechanical properties of Fe-Mn-Al-C steels with Ni additions 加工路径对添加Ni的Fe-Mn-Al-C钢微观结构和力学性能的影响

materials science materials in engineering

IF0

2025-08-08

PREAI

J.S. Rodríguez; J.F. Duran; O.A. Zambrano; A. Bedolla-Jacuinde

Microstructure, texture and magnetic properties of Si-Sb ultra-low carbon electrical steels, hot-rolled at temperatures below AC1 and subjected to annealing before to cold rolling Si-Sb超低碳电工钢的显微组织、织构和磁性能，该钢在低于AC1温度下进行热轧，并在冷轧前进行退火处理。

MATERIALS LETTERS

IF2.7

2025-04-01

PREAI

Hernandez, Fernando; Torres, Alberto; Hernandez, Lorena; Bedolla, Arnoldo; Deaquino, Rogelio; Salinas, Armando; Altamirano, Gerardo

Evaluation of Hydrogen Embrittlement's Effects on the Impact Toughness of Martensitic Ultra-High-Strength Steels as a Function of the Cathodic Charging Time

MATERIALS

IF3.2

2025-02-09

OAAI

Villalobos, Julio C.; Bedolla-Jacuinde, Arnoldo; Torres-Islas, Alvaro; Velasco-Plascencia, Melina; Villanueva, Heriberto; Rojas, Hugo; Del-Pozo, Adrian

Tribological assessment of a water-based nanofluid containing CeO2 nanoparticles supported on multiwalled carbon nanotubes

JOURNAL OF MATERIALS SCIENCE

IF3.9

2023-09-30

PREAI

Castro-Cedeno, Baltazar; Lopez-Tinoco, Julian; Rangel, R.; Suarez-Martinez, Reynier; Bedolla-Jacuinde, Arnoldo; Lara-Romero, Javier

The effect of small additions of Nb and Ti on the sliding wear behavior of a Co-30Cr-5Mo alloy

WEAR

IF6.1

2023-06-01

PREAI

Guerra-Lopez, F. V.; Bedolla-Jacuinde, A.; Leon-Patino, C. A.; Vazquez-Ramos, M.

Sliding wear behavior of Co-Cr-Mo alloys with C and B additions for wear applications

WEAR

IF6.1

2023-06-01

PREAI

Quintero-Ortiz, Josue; Guerra, F. V.; Bedolla-Jacuinde, Arnoldo; Leon-Patino, Carlos Alberto; Pacheco-Cedeno, Jose Sergio

Low hydrogen pressure effect over microhardness and impact toughness of an experimental X-120 microalloyed steel

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING

IF3.5

2023-06-01

PREAI

Del-Pozo, Adrian; Villalobos, Julio C.; Bedolla-Jacuinde, Arnoldo; Vergara-Hernandez, Hector J.; Vazquez-Gomez, Octavio; Campillo, Bernardo

Effect of load and sliding velocity on the wear behaviour of infiltrated TiC/Cu-Ni composites

WEAR

IF6.1

2021-11-01

PREAI

Tellez-Villasenor, M. A.; Leon-Patino, C. A.; Aguilar-Reyes, E. A.; Bedolla-Jacuinde, A.

Effect of amount and distribution of primary TiC on the wear behavior of a 12%Cr-3%C white iron under dry sliding conditions'

WEAR

IF6.1

2021-07-01

PREAI

Reyna, S.; Bedolla-Jacuinde, A.; Guerra, F. V.; Mejia, I.; Garcia, M.

Microstructural effect and wear performance of high chromium white cast iron modified with high boron contents

WEAR

IF6.1

2021-07-01

PREAI

Bedolla-Jacuinde, A.; Guerra, F., V; Guerrero-Pastran, A. J.; Sierra-Cetina, M. A.; Valdez-Medina, S.

An approach for the design of multiphase advanced high-strength steels based on the behavior of CCT diagrams simulated from the intercritical temperature range

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

IF7

2020-01-01

PREAI

Contreras, A.; Lopez, A.; Gutierrez, E. J.; Fernandez, B.; Salinas, A.; Deaquino, R.; Bedolla, A.; Saldana, R.; Reyes, I.; Aguilar, J.; Cruz, R.

Dry sliding wear behavior of infiltrated particulate reinforced Ni/TiC composites

WEAR

IF6.1

2019-04-01

PREAI

Leon-Patino, C. A.; Braulio-Sanchez, M.; Aguilar-Reyes, E. A.; Bedolla-Becerril, E.; Bedolla-Jacuinde, A.

Comminution effect on surface roughness and flotation behavior of malachite particles

MINERALS ENGINEERING

IF5

2019-03-01

PREAI

Li, Zhili; Rao, Feng; Corona-Arroyo, Mario A.; Bedolla-Jacuinde, Arnoldo; Song, Shaoxian

Effects of tungsten on the microstructure and on the abrasive wear behavior of a high-chromium white iron

WEAR

IF6.1

2017-04-01

PREAI

Cortes-Carrillo, E.; Bedolla-Jacuinde, A.; Mejia, I.; Zepeda, C. M.; Zuno-Silva, J.; Guerra-Lopez, F. V.

研究方向