logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
M

Mohammed M. Gad

Imam Abdulrahman Bin Faisal University

35H指数
170论文数
4.4K被引数
收录论文 75
发表时间
logo
3D assessment of the marginal and internal gap and fracture load of ceramic surveyed inlays designed for removable partial denture support: An in vitro comparative study三维评估用于可摘局部义齿支持的陶瓷嵌体边缘和内部间隙及断裂载荷：一项体外比较研究
errJournal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry
IF3.6
err2026-09-07
err0
errOAAI
errMohammed M. Gad BDS, MSc; Amr A. Mahrous BDS, MSc, PhD; Shorooq K. Almajhad BDS; Amjaad M. Almarzoogi BDS; Majd A. Alotaibi BDS; Haidar Alalawi BDS, CAGS, DScD, FACP, FRCD (C); Ahmad M. Al-Thobity; Passent Ellakany BDS, MSc, PhD; Shaimaa M. Fouda BDS, MSc, PhD; Moamen A. Abdalla BDSm, MSc, PhD; Nadim Z. Baba DMD, MSD, FACP; Fahad A. Al-Harbi BDS,MSD, DScD, FACP
err分享
err收藏
3D-printed full-arch denture teeth: impact of printing orientation on the trueness and precision in vitro3D打印全口义齿牙：打印方向对体外真实度和精确度的影响
errBMC Oral Health
IF3.1
err2026-07-16
err0
errOAAI
errDanah F. Almaskin; Reem Abualsaud; Haidar Alalawi; Ahmad M. Al-Thobity; Ashwin C Shetty; Mohammed M. Gad
err分享
err收藏
Effect of Various Solutions on the Color Stability of 3D-Printed Provisional Fixed Dental Prostheses: A Systematic Review不同溶液对3D打印临时固定义齿颜色稳定性的影响：一项系统综述
errJournal of Esthetic and Restorative Dentistry
IF4.1
err2026-04-20
err0
PREAI
errMohammed M. Gad; Abdulrahman A. Balhaddad; Essam A. Nassar; Reem Abualsaud; Nadim Z. Baba; Fahad A. AlHarbi
err分享
err收藏
Comparative Effect of Different Nanoparticles with Different Concentrations on Fracture Toughness and Elastic Modulus of Restorative Dental Composite Resin不同纳米粒子在不同浓度下对修复用牙科复合树脂断裂韧性和弹性模量的比较效应
errDentistry Journal
IF3.1
err2026-03-01
err0
errOAAI
errMohamed Ahmed Helal; Emad Amin Azmy; Amal Al-Faraj; Faris A. Alshahrani; Firas K. Alqarawi; Hamad S. AlRumaih; Mohammed M. Gad; Mostafa I. Fayad
err分享
err收藏
Herbal and Alcohol-Free Mouthwashes as Chlorhexidine Alternatives for Preventing Enamel Demineralization in Orthodontic Patients: An In Vitro Study草本和无酒精漱口水作为氯己定替代品预防正畸患者牙釉质脱矿：一项体外研究
errDentistry Journal
IF3.1
err2026-02-27
err0
errOAAI
errNyema A. Abualsaud; Shahad T. Alameer; Lama M. Alshamrani; Abdulaziz S. Alamri; Naif N. Almasoud; Suliman Y. Shahin; Mohammed M. Gad; Osama A. Alsulaiman; Abdulrahman A. Balhaddad; Ahmed A. Alsulaiman
err分享
err收藏
Comparative Evaluation of Commercial Bulk-Fill Resin-Based Composites: Flexural Properties, Roughness, Water Sorption and Solubility, and Color Stability商业大体积填充树脂基复合材料的比较评价：弯曲性能、表面粗糙度、吸水性和溶解性以及颜色稳定性
errDentistry Journal
IF3.1
err2026-02-27
err0
errOAAI
errKhalid S. Almulhim; Sarah M. Alghamdi; Raghad S. Alqahtani; Jood K. Alsahiem; Afnan O. Al-Zain; Mohammed M. Gad; Abdulrahman A. Balhaddad
err分享
err收藏
Impact of Printing Orientations on the Trueness and Precision of Additively Fabricated Complete Denture Base Before and After Thermal Aging热处理前后打印方向对增材制造全口义齿基托准确度和精密度的影响
errDentistry Journal 2025, Vol. 13, Page 598
IF3.1
err2025-12-13
err0
errOAAI
errSara Tarq AL-Zayyat; Turki Alshehri; Shahad T. Alameer; Sarah Hajaj Althunayyan; Reem A. Aldhafiri; Zainab Albasry; Abdulrahman A. Balhaddad; Haidar Alalawi; Mohammed M. Gad
err分享
err收藏
Internal fit and fracture resistance of different CAD-CAM surveyed ceramic crowns: In vitro comparative analysis不同CAD-CAM可摘式陶瓷冠的内适合性与断裂强度：体外比较分析
errJOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY
IF3.6
err2025-12-01
err0
errOAAI
errAlshahrani, Faris A.; Alalawi, Haidar; Al-thobity, Ahmad M.; Ibn Shamsah, Abdulmohsen S.; Almusallam, Moath I.; Alfaraj, Amal; Alzoubi, Fawaz; Alrumaih, Hamad S.; Gad, Mohammed M.; Baba, Nadim Z.
err分享
err收藏
Impact of silicon dioxide and hydroxyapatite nanoparticles on the flexural strength and surface properties of 3D-printed denture base resins: An in vitro study二氧化硅和羟基磷灰石纳米粒子对3D打印义齿基托树脂弯曲强度及表面性能的影响：一项体外研究
errJournal of Prosthodontics
IF1.5
err2025-11-03
err0
PREAI
errTahani Abushowmi BDS; Haidar Alalawi BDS, CAGS, DScD, FACP, FRCD(C); Reem Abualsaud BDS, DScD; Doha Alramadan BDS; Neveen M. Ayad BDS, MSc, PhD; Sultan Akhtar MSc, PhD; Abdul Samad Khan BDS, MSc, PhD; Nadim Z. Baba DMD, MSD, FACP; Mohammed M. Gad BDS, MSc
err分享
err收藏
Fracture strength of repaired 3D-printed interim fixed dental prostheses: In vitro comparison of repair material type and surface treatment修复型3D打印临时固定义齿的断裂强度：修复材料类型和表面处理的体外比较
errJournal of Prosthodontics
IF1.5
err2025-10-10
err0
PREAI
errFaisal D. Al-Qarni; Alanoud Albarrak; Shahad Alhamid; Sultan Akhtar; Soban Q. Khan; Mohammed Al-Nefaiee; Yousif Al-Dulaijan; Mohammed M. Gad
err分享
err收藏
In vitro study on the effect of Halloysite Nanotubes (HNTs) on flexural properties of 3D-printed dental resins after thermal aging体外研究Halloysite Nanotubes (HNTs) 对热老化后3D打印牙科树脂弯曲性能的影响
errJournal of Prosthodontics
IF0
err2025-07-24
err0
PREAI
errMohammed M. Gad BDS, MSc; Ali Alkhathami BDS; Shahad T. Alameer BDS; Turki Alshehri BDS; Mohammed Alotaibi BDS; Soban Q. Khan BSc, MSc, PhD; Sultan Akhtar MSc, PhD; Yousif A. Al-Dulaijan BDS, MDS, FRCD(C), PhD
err分享
err收藏
High-speed sintering on monolithic zirconia: Effects on surface and antagonist wear in vitro单晶氧化锆的高温烧结：对体外表面磨损和对颌面磨损的影响
errJournal of Prosthodontics
IF0
err2025-06-06
err0
PREAI
errTurki Alsubaie; Rayan Ahmed Alhebshi; Abdul Samad Khan; Mohammed M. Gad; Abdulrahman A. Balhaddad; Haidar Alalawi
err分享
err收藏
Antifungal Efficacy and Surface Properties of Conventional and 3D-Printed Denture Base Materials Modified with Titanium Tetrafluoride (TiF4): In Vitro Study抗真菌功效及表面性质研究：经四氟化钛（TiF4）改性的传统与3D打印义齿基托材料体外研究
errPOLYMERS
IF4.9
err2025-05-20
err0
errOAAI
errAlzaher, Zahra A.; Aldobais, Fatimah A.; Albazroun, Zainab; Alatiyyah, Fatimah M.; Abualsaud, Reem; Alalawi, Haidar; Al-Thobity, Ahmad M.; Khan, Soban Q.; Gad, Mohammed M.
err分享
err收藏
The Effects of Different Chemical Disinfectants on the Strength, Surface, and Color Properties of Conventional and 3D-Printed Fabricated Denture Base Materials不同化学消毒剂对传统及3D打印制备义齿基托材料强度、表面及颜色性能的影响
errPROSTHESIS
IF4.5
err2025-02-21
err0
errOAAI
errAhmed Fathey Elhagali; Mohamed Y. Sharaf; Mahmoud El-Said Ahmed Abd El-Aziz; Ali Sayed Ali Bayiumy; Mahmoud Abdellah Ahmed Refaei; Ahmed Hassan Al-Agamy; Ahmed Ali; Ahmed Elakel; Raand Altayyar; Riham Alzahrani; Mohammed M. Gad; Mohamed Aboshama
err分享
err收藏
Flexural Strength and Surface Properties of 3D-Printed Denture Base Resins-Effect of Build Angle, Layer Thickness and Aging
errMATERIALS
IF3.2
err2025-02-19
err0
errOAAI
errFouda, Shaimaa; Ji, Wenjie; Gad, Mohammed M.; Alghamdi, Maram A.; Rohr, Nadja
err分享
err收藏
Nanocomposites soft and hard denture liners containing ZrO2 nanoparticles: An in vitro evaluation of surface roughness and Candida albicans adhesion
errJOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY
IF3.6
err2025-02-03
err0
PREAI
errAlshahrani, Faris A.; Albazroun, Zainab; Alabdullatif, Atheer; Aldehaileb, Sarah; Khan, Soban Q.; Fouda, Shaimaa M.; Balhaddad, Abdulrahman A.; Abdelfattah, Mohamed Y.; Gad, Mohammed M.
err分享
err收藏
Dental Students' Awareness Regarding the Implementation of Digital Dentistry in Prosthodontics-A Questionnaire-Based Study关于数字牙科在修复牙科中实施情况的牙科学生意识——一项基于问卷调查的研究
errPROSTHESIS
IF4.5
err2025-01-10
err0
errOAAI
errGad, Mohammed M.; Al Shehab, Sujood S.; Alshaikhnasser, Farah Y.; Alboryh, Shaymaa Y.; Alkhalaf, Ali I.; Khan, Soban Q.; Alakloby, Basmah O.; Alharbi, Hind M.; Alhorish, Nada; Alrajhi, Shoug; Al-Abidi, Khalid S.; Ali, Mohamed S.; Al-Dulaijan, Yousif A.; Fouda, Shaimaa M.
err分享
err收藏
Predicting Water Saturation in a Greek Oilfield with the Power of Artificial Neural Networks
errACS OMEGA
IF4.3
err2025-01-03
err0
errOAAI
errGad, Mohammed; Mahmoud, Ahmed Abdulhamid; Panagopoulos, George; Kiomourtzi, Paschalia; Kirmizakis, Panagiotis; Elkatatny, Salaheldin; bin Waheed, Umair; Soupios, Pantelis
err分享
err收藏
Internal and marginal fits of 3D-printed provisional prostheses: comparative effect of different printing parameters3d打印的临时假体的内部和边缘配合: 不同打印参数的比较效果
errFRONTIERS IN ORAL HEALTH
IF3.1
err2024-12-12
err0
errOAAI
errAl-Dulaijan, Yousif A.; Aldamanhori, Rand; Algaoud, Hadeel; Alshubaili, Rand; Alkhateeb, Reem; Alalawi, Haidar; Abualsaud, Reem; Alqarawi, Firas K.; Al-Qarni, Faisal D.; Gad, Mohammed M.
err分享
err收藏
Effect of daily immersion of different beverages on the surface roughness and color stability of 3D-printed denture base resins每日浸泡不同饮料对3d打印义齿基托树脂表面粗糙度和颜色稳定性的影响
errJOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY
IF3.6
err2024-11-26
err0
PREAI
errGad, Mohammed M.; Alramadan, Hassan; Alkoudemi, Mohammed; Aljubran, Hussain; Altayyar, Raand; Alghamdi, Deena; Baba, Nadim Z.; Khan, Soban Q.; Abualsaud, Reem; Elhagali, Ahmed Fathey; Al-Harbi, Fahad A.
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
M
Mutlu Özcan
H 指数: 86 · 论文数: 1.0K
S
Salaheldin Elkatatny
H 指数: 49 · 论文数: 565
M
Mary Anne S. Melo
H 指数: 48 · 论文数: 216
S
Sultan Akhtar
H 指数: 48 · 论文数: 259
B
Burak Yılmaz
H 指数: 46 · 论文数: 414
查看更多