logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
J

Joaquim Ciurana

University of Girona

41H指数
199论文数
6.6K被引数
收录论文 78
发表时间
logo
The influence of post-curing methods on mechanical properties of photosensitive resins using vat photopolymerization for stents利用 vat 光聚合工艺制备支架时，后固化方法对光敏树脂机械性能的影响
errMaterials Today Communications
IF4.5
err2025-11-24
err0
errOAAI
errAniol Bosch; Pauline Champion; Quim Tarrés; Marc Delgado-Aguilar; Antonio J. Guerra; Joaquim Ciurana
err分享
err收藏
A new multitech bioprinter for high precision triple negative breast cancer modeling一种新型多技术生物打印机用于高精度三阴性乳腺癌建模
errThe International Journal of Advanced Manufacturing Technology
IF0
err2025-11-06
err0
errOAAI
errSira Ausellé-Bosch; Jesús Manuel Rodríguez-Rego; Laura Mendoza-Cerezo; Antonio Jesús Guerra; Aniol Bosch; Enric Casanova-Batlle; Joaquim Ciurana; Teresa Puig
err分享
err收藏
Powder-reinforced photosensible resins with magnesium and barite to enhance performance of stents manufactured via vat photopolymerization镁和重晶石增强型粉末光敏树脂，用于提升通过vat光聚合制造支架的性能
errinternational journal of advanced manufacturing technology
IF0
err2025-08-23
err0
PREAI
errAniol Bosch; Samuel Montero-Coedo; Genís Portas; Joaquim Ciurana; Antonio J. Guerra
err分享
err收藏
Elucidating the Role of FASN in Lung Cancer Stem Cells in Sensitive and Resistant EGFR-Mutated Non-Small Cell Lung Cancer Cells阐明FASN在敏感和耐药EGFR突变非小细胞肺癌细胞中的肺癌干细胞中的作用
errlung cancer targets and therapy
IF0
err2025-05-27
err0
errOAAI
errEmma Polonio-Alcalá; Sira Ausellé-Bosch; Gerard Riesco-Llach; Pablo Novales; Lidia Feliu; Marta Planas; Joaquim Ciurana; Teresa Puig
err分享
err收藏
Analysis of printing and post-curing parameters to enhance physicochemical and biomechanical properties of polymeric stents produced by tubular vat photopolymerization
errPROGRESS IN ADDITIVE MANUFACTURING
IF5.4
err2025-01-24
err0
PREAI
errBosch, A.; Auselle-Bosch, S.; Ponce, C.; Rubio, C.; Puig, T.; Ciurana, J.; Guerra, A. J.
err分享
err收藏
Polyvinyl alcohol-silk fibroin composite stents: A comprehensive investigation into biocompatibility and mechanical performance
errINTERNATIONAL JOURNAL OF BIOPRINTING
IF6
err2024-07-10
err0
errOAAI
errCasanova-Batlle, Enric; Ros, Maria; Polonio-Alcala, Emma; Auselle-Bosch, Sira; Puig, Teresa; Guerra, Antonio; Ciurana, Joaquim
err分享
err收藏
Feasibility assessment of polyvinyl alcohol-based bioresorbable cardiovascular stents manufactured via solvent-cast direct writing extrusion
errPOLYMER TESTING
IF6
err2024-05-01
err4
errOAAI
errCasanova-Batlle, Enric; Montero-Coedo, Samuel; Bosch, Aniol; Guerra, Antonio J.; Ciurana, Joaquim
err分享
err收藏
AZ12756122, a novel fatty acid synthase inhibitor, decreases resistance features in EGFR-TKI resistant EGFR-mutated NSCLC cell modelsAZ12756122是一种新型脂肪酸合成酶抑制剂，可降低egfr-tki耐药EGFR突变NSCLC细胞模型的耐药特征
errBIOMEDICINE & PHARMACOTHERAPY
IF7.5
err2022-12-01
err5
errOAAI
errPolonio-Alcala, Emma; Porta, Rut; Ruiz-Martinez, Santiago; Vasquez-Dongo, Carmen; Relat, Joana; Bosch-Barrera, Joaquim; Ciurana, Joaquim; Puig, Teresa
err分享
err收藏
Characterization of direct ink write pure silk fibroin based on alcohol post-treatments基于酒精后处理的直墨写纯丝素蛋白的表征
errPOLYMER TESTING
IF6
err2022-12-01
err8
errOAAI
errCasanova-Batlle, Enric; Guerra, Antonio J.; Ciurana, Joaquim
err分享
err收藏
The solvent chosen for the manufacturing of electrospun polycaprolactone scaffolds influences cell behavior of lung cancer cells
errSCIENTIFIC REPORTS
IF3.9
err2022-11-14
err2
errOAAI
errPolonio-Alcala, Emma; Casanova-Batlle, Enric; Puig, Teresa; Ciurana, Joaquim
err分享
err收藏
Fatty acid synthase as a feasible biomarker for triple negative breast cancer stem cell subpopulation cultured on electrospun scaffolds脂肪酸合酶作为在电纺支架上培养的三阴性乳腺癌干细胞亚群的可行生物标志物
errMATERIALS TODAY BIO
IF10.2
err2021-09-01
err8
errOAAI
errRabionet, Marc; Polonio-Alcala, Emma; Relat, Joana; Yeste, Marc; Sims-Mourtada, Jennifer; Kloxin, April M.; Planas, Marta; Feliu, Lidia; Ciurana, Joaquim; Puig, Teresa
err分享
err收藏
Cancer Cell Direct Bioprinting: A Focused Review癌细胞直接生物打印: 重点综述
errMICROMACHINES
IF3
err2021-06-28
err6
errOAAI
errLobo, David Angelats; Ginestra, Paola; Ceretti, Elisabetta; Miquel, Teresa Puig; Ciurana, Joaquim
err分享
err收藏
Inhibition of fatty acid synthase (FASN) activity induces cytotoxicity on gefitinib- and osimertinib-resistant EGFR-mutated non-small cell lung cancer cells
errANNALS OF ONCOLOGY
IF65.4
err2020-09-01
err0
errOAAI
errPolonio, E.; Palomeras, S.; Bosch-Barrera, J.; Porta-Balanya, R.; Relat, J.; Ciurana, J.; Ruiz-Martinez, S.; Puig, T.
err分享
err收藏
Optimization of photocrosslinkable resin components and 3D printing process parameters光交联树脂组分及3D打印工艺参数的优化
errACTA BIOMATERIALIA
IF9.6
err2019-10-01
err49
errOAAI
errGuerra, Antonio J.; Lammel-Lindemann, Jan; Katko, Alex; Kleinfehn, Alex; Rodriguez, Ciro A.; Catalani, Luiz H.; Becker, Matthew L.; Ciurana, Joaquim; Dean, David
err分享
err收藏
EGCG-Derivative G28 Shows High Efficacy Inhibiting the Mammosphere-Forming Capacity of Sensitive and Resistant TNBC ModelsEGCG衍生物G28显示出抑制敏感和抗性TNBC模型的乳腺球形成能力的高功效
errMOLECULES
IF4.6
err2019-03-15
err29
errOAAI
errGiro-Perafita, Ariadna; Rabionet, Marc; Planas, Marta; Feliu, Lidia; Ciurana, Joaquim; Ruiz-Martinez, Santiago; Puig, Teresa
err分享
err收藏
3D-Printed PCL/PLA Composite Stents: Towards a New Solution to Cardiovascular Problems3d打印PCL/PLA复合支架: 心血管问题的新解决方案
errMATERIALS
IF3.2
err2018-09-11
err127
errOAAI
errGuerra, Antonio J.; Cano, Paula; Rabionet, Marc; Puig, Teresa; Ciurana, Joaquim
err分享
err收藏
Effect of the main process parameters on the mechanical strength of polyphenylsulfone (PPSU) in ultrasonic micro-moulding process超声微成型中主要工艺参数对聚苯砜 (PPSU) 机械强度的影响
errULTRASONICS SONOCHEMISTRY
IF9.7
err2018-09-01
err28
PREAI
errDorf, Tomasz; Perkowska, Katarzyna; Janiszewska, Magdalena; Ferrer, Ines; Ciurana, Joaquim
err分享
err收藏
Design of a Scaffold Parameter Selection System with Additive Manufacturing for a Biomedical Cell Culture用于生物医学细胞培养的具有增材制造的支架参数选择系统的设计
errMATERIALS
IF3.2
err2018-08-14
err18
errOAAI
errRabionet, Marc; Polonio, Emma; Guerra, Antonio J.; Martin, Jessica; Puig, Teresa; Ciurana, Joaquim
err分享
err收藏
Effects of different sterilization processes on the properties of a novel 3D-printed polycaprolactone stent不同灭菌工艺对新型3d打印聚己内酯支架性能的影响
errPOLYMERS FOR ADVANCED TECHNOLOGIES
IF3.4
err2018-05-28
err30
PREAI
errGuerra, Antonio J.; Cano, Paula; Rabionet, Marc; Puig, Teresa; Ciurana, Joaquim
err分享
err收藏
Customized cranial implant manufactured by incremental sheet forming using a biocompatible polymer使用生物相容性聚合物通过增量片材成型制造的定制颅骨植入物
errRAPID PROTOTYPING JOURNAL
IF3.6
err2018-01-02
err25
PREAI
errBagudanch, Isabel; Luisa Garcia-Romeu, Maria; Ferrer, Ines; Ciurana, Joaquim
err分享
err收藏

研究方向

暂时未获取到该数据
合作学者
合作期刊
L
Luigi Ambrosio
H 指数: 80 · 论文数: 622
P
Paulo Bártolo
H 指数: 64 · 论文数: 496
M
Matthew L. Becker
H 指数: 61 · 论文数: 322
P
P. M. Champion
H 指数: 56 · 论文数: 873
K
K. P. Rajurkar
H 指数: 54 · 论文数: 276
查看更多