logo
科言猫学术研究的AI总结
language
手机端手机端
  • Phone Feature微信小程序
简体中文简体中文
notice消息通知
博客博客
delete
arrow
返回
J

Jamie J. Kruzic

university of new south wales

58H指数
271论文数
1.1W被引数
收录论文 159
发表时间
logo
Comparative creep–fatigue assessment of a representative intermediate heat exchanger in a high-temperature gas-cooled reactor system高温气冷堆系统中代表性中间换热器的蠕变-疲劳评估比较
errNuclear Engineering and Technology
IF2.6
err2026-05-26
err0
errOAAI
errJ. Lum; M.N. Tran; J.J. Kruzic; M.C. Messner; O. Muránsky
err分享
err收藏
Corrigendum to “The importance of fracture toughness evaluation for additively manufactured metals” [Acta Materialia 276 (2024) 120061]勘误：“The importance of fracture toughness evaluation for additively manufactured metals” [Acta Materialia 276 (2024) 120061]
errActa Materialia
IF9.3
err2026-03-12
err0
errOAAI
errMoses J. Paul; Jamie J. Kruzic; Upadrasta Ramamurty; Bernd Gludovatz
err分享
err收藏
Correlations between Microstructure and Mechanical Properties for Laser Powder Bed Fusion Fabricated Ta/Fe–Mn-Si Metal Matrix Composites Revealed by Machine Learning机器学习揭示激光粉末床熔融制备的Ta/Fe–Mn-Si金属基复合材料微观结构与力学性能之间的相关性
errShape Memory and Superelasticity
IF2.4
err2026-03-06
err0
errOAAI
errZi Li; Zhuohan Cao; Zuhao Zhang; Michael Ferry; Jamie J. Kruzic; Xiaopeng Li
err分享
err收藏
Effect of melt pool interference modes on mesostructure and microstructure of laser powder bed fusion fabricated Ti-6Al-4V alloy熔池干扰模式对激光粉末床熔融制备的Ti-6Al-4V合金的亚结构及微观结构的影响
errmaterials science and engineering: a
IF0
err2026-02-16
err0
errOAAI
errZhuohan Cao; Yi Liu; Jingyuan Shen; Zi Li; Yupei Tian; Yi Xiong; Jamie J. Kruzic; Xiaopeng Li
err分享
err收藏
Multi-Objective Surrogate-Assisted Calibration of CPFEM Models Using Macroscopic Response and In Situ EBSD Measurements of Grain Reorientation Trajectories基于宏观响应和原位EBSD测量的晶粒再定向轨迹的多目标代理辅助CPFEM模型校准
errActa Materialia
IF9.3
err2025-12-05
err0
errOAAI
errJ. Choi; O. Muránsky; M.C. Messner; T. Wei; T. Hu; J.J. Kruzic; M.D. McMurtrey
err分享
err收藏
Improved anisotropic elastic properties evaluation of cancellous bone using novel experimental and image-based fabric tensor analysis改进松质骨各向异性弹性性能的评估：采用新颖的实验和基于图像的结构张量分析
errJournal of the Mechanical Behavior of Biomedical Materials
IF3.5
err2025-09-23
err0
PREAI
errJiapeng He; Guowei Zhou; Yiwei Xie; Zhuohan Cao; Zi Li; Jamie J. Kruzic; Xiaopeng Li; Dayong Li; Jiangming Yu
err分享
err收藏
Significant enhancement of room-temperature shape recovery properties of Ta-modified Fe-Mn-Si shape memory alloys fabricated by laser powder bed fusion采用激光粉末床熔融制备的Ta改性Fe-Mn-Si形状记忆合金，其室温形状恢复性能得到显著提升。
errAdditive Manufacturing
IF11.1
err2025-09-05
err0
errOAAI
errZi Li; Zhuohan Cao; Qian Liu; Wenliang Chen; Zuhao Zhang; Richard F. Webster; Yu Wang; Jiawen Xu; Xiebin Wang; Michael Ferry; Jamie J. Kruzic; Xiaopeng Li
err分享
err收藏
Revealing Nanoscale Solute-Rich Clusters in Bulk Metallic Glasses by Atom Probe Tomography通过原子探针断层术揭示块体金属玻璃中的纳米尺度溶质富集团簇
errSmall Methods
IF9.1
err2025-08-14
err0
PREAI
errKeita Nomoto; Huma Bilal; Bosong Li; Bernd Gludovatz; Christoph Gammer; Anton Hohenwarter; Jürgen Eckert; Jamie J. Kruzic; Simon P. Ringer
err分享
err收藏
Inelastic and fracture behaviour of nuclear graphite核石墨的弹塑性和断裂行为
errINTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
IF9.4
err2025-06-01
err0
errOAAI
errIrman, K.; Flores-Johnson, E. A.; Kruzic, J. J.; Windes, W. E.; Marrow, T. J.; Muransky, O.
err分享
err收藏
Multi-objective calibration of elastic-viscoplastic models to capture the elevated-temperature creep and tensile behaviour of alloy 617对弹性-粘塑性模型的多目标校准，以捕捉合金617的高温蠕变和拉伸行为
errInternational Journal of Pressure Vessels and Piping
IF3.5
err2025-05-26
err0
PREAI
errJ. Choi; O. Muránsky; M.C. Messner; J.J. Kruzic; M.D. McMurtrey
err分享
err收藏
Stretch activated molecule immobilization in disulfide linked double network hydrogels二硫键交联双网络水凝胶中拉伸激活分子的固定化
errACTA BIOMATERIALIA
IF9.6
err2025-05-01
err0
errOAAI
errHuang, Yuwan; Li, Zihao; Ranaweera, Chavinya D.; Jayathilaka, Pavithra B.; Islam, Md Shariful; Ajam, Alaa; Silberstein, Meredith N.; Kilian, Kristopher A.; Kruzic, Jamie J.
err分享
err收藏
Crack growth in laser powder bed fusion fabricated alloy 718 at 650 °C under static and cyclic loading
errINTERNATIONAL JOURNAL OF FATIGUE
IF6.8
err2025-04-01
err0
errOAAI
errOstergaard, Halsey E.; Pribe, Joshua D.; Hasib, M. Tarik; Siegmund, Thomas; Kruzic, Jamie J.
err分享
err收藏
Introduction of sulfur into an eutectic of the Zr-Ti-Ni-Cu system: Alloy development and characterization of the (Zr50Ti16.6Ni18.3Cu15)100-xSx bulk metallic glasses向Zr-Ti-Ni-Cu系共晶中引入硫：合金开发与(Zr50Ti16.6Ni18.3Cu15)100-xSx块体金属玻璃的表征
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2025-04-01
err0
PREAI
errAdam, Bastian; Kruse, Oliver; Ruschel, Lucas Matthias; Neuber, Nico; Frey, Maximillian; Gross, Oliver; Jiang, Hao-Ran; Li, Bosong; Gludovatz, Bernd; Kruzic, Jamie J.; Busch, Ralf
err分享
err收藏
Discussing possible futures to neutralise nuclear energy discourse讨论可能的未来以中和核能话语
errRENEWABLE & SUSTAINABLE ENERGY REVIEWS
IF16.3
err2025-03-01
err0
errOAAI
errGilmore, N.; Burr, P. A.; Obbard, E.; Stockings, C.; Kruzic, J. J.; Seitenzahl, I.; Ata, S.; Maartensson, E.; Niven, R. K.
err分享
err收藏
Magnetoactive Nanotopography on Hydrogels for Stimulated Cell Adhesion and Differentiation基于水凝胶的磁致活性纳米拓扑结构用于刺激细胞粘附与分化
errSMALL SCIENCE
IF8.3
err2025-01-27
err0
errOAAI
errIslam, Md Shariful; Molley, Thomas G.; Jalandhra, Gagan K.; Fang, Jason; Kruzic, Jamie J.
err分享
err收藏
Critical damage events of 3D printed AlSi10Mg alloy via in situ synchrotron X-ray tomography原位同步辐射x射线断层扫描3D打印AlSi10Mg合金临界损伤事件
errACTA MATERIALIA
IF9.3
err2025-01-01
err1
PREAI
errWu, Zhengkai; Wu, Shengchuan; Kruzic, Jamie J.; Hu, Yanan; Yu, Huan; Zhang, Xingxing; Li, Xiaopeng; Wang, Qingyuan; Kang, Guozheng; Withers, Philip J.
err分享
err收藏
Fracture behavior of NiNb and NiNbP bulk metallic glasses
errJOURNAL OF ALLOYS AND COMPOUNDS
IF6.3
err2025-01-01
err2
errOAAI
errLi, Bosong; Ruschel, Lucas M.; Nomoto, Keita; Gross, Oliver; Adam, Bastian; Neuber, Nico; Frey, Maximilian; Ringer, Simon P.; Gludovatz, Bernd; Busch, Ralf; Kruzic, Jamie J.
err分享
err收藏
The effect of micro- and mesoscale heterogeneity on the fracture of laser powder bed fusion processed duplex stainless steels微观和介观尺度异质性对激光粉末床熔融加工双相不锈钢断裂的影响
errSCRIPTA MATERIALIA
IF5.6
err2025-01-01
err2
errOAAI
errPaul, Moses J.; Li, Huikai; Brodie, Erin G.; Kruzic, Jamie J.; Hutchinson, Christopher; Gludovatz, Bernd
err分享
err收藏
Improving the bioactivity and mechanical properties of poly(ethylene glycol)-based hydrogels through a supramolecular support network通过超分子支持网络改善基于聚乙二醇的水凝胶的生物活性和机械性能
errJOURNAL OF MATERIALS CHEMISTRY B
IF5.7
err2025-01-01
err1
PREAI
errLiu, Yuzhu; Islam, Md Shariful; Bakker, Anna; Li, Zihao; Ajam, Alaa; Kruzic, Jamie J.; Kilian, Kristopher A.
err分享
err收藏
Improved mechanical and electrochemical properties of seed-assisted reaction-sintered Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 solid electrolytes种子辅助反应烧结Li 1.3 Al 0.3 Ti 1.7 (PO 4) 3固体电解质的改善的机械和电化学性能
errCERAMICS INTERNATIONAL
IF5.6
err2025-01-01
err0
PREAI
errKim, Dong Gyu; Kruzic, Jamie J.; Kim, Do Kyung
err分享
err收藏

研究方向

暂无研究方向
合作学者
合作期刊
R
Robert O. Ritchie
H 指数: 147 · 论文数: 1.0K
王庆 封面图
王庆 (Qing Wang)
H 指数: 123 · 论文数: 1.5K
C
C.T. Liu
H 指数: 123 · 论文数: 913
J
Joel W. Ager
H 指数: 122 · 论文数: 909
J
J. Eckert
H 指数: 114 · 论文数: 1.8K
查看更多