3-D Objects Detection and Tracking Using Solid-State LiDAR and RGB Camera

doi:10.1109/JSEN.2023.3279500

2023-07-01

PRE

DOI：10.1109/JSEN.2023.3279500

原文链接

原文求助

摘要

En 中文

Objects detection and tracking using 3-D LiDAR has gained momentum lately while it has not been extensively applied, and the main challenge is that conventional mechanical LiDAR is expensive and it is difficult for single sensor to obtain good tracking performance over a long period of time. In this article, we propose a multisensor fusion 3-D objects detection and tracking framework using solid-state LiDAR and RGB camera. We use a low-cost solid-state LiDAR with irregular scan pattern and propose a universal clustering method which determines the searching radius by laser density and range. To improve the overall tracking performance, range and visual information are both utilized to associate 3-D objects across different frames. We avoid introducing odometry errors into the system and use visual difference rather than estimated trajectory to distinguish between closely located objects. And we have designed a re-detection process to locate objects that were missed by the clustering algorithm. We evaluated the proposed method on five sequences captured by our ego-vehicle and three additional sequences from open-source datasets. Our results demonstrate that the adaptive searching radius enhances recall and the overall tracking performance is improved by fusing LiDAR and camera.

Keyword:

Laser radar

Three-dimensional displays

Object detection

Sensors

Point cloud compression

Feature extraction

Cameras

3-D object detection

multi-object tracking (MOT)

object tracking

point cloud clustering