.png){kind=icon}
返回
A performance-based optimization framework applied to a classical STM-designed deep beam
.png){kind=icon}
PRE
AI
DOI：10.1016/j.istruc.2022.05.035.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The outcomes of experimental and numerical investigations on the design of a classical deep beam with a large opening are presented in this paper. Two structural members were designed using the strut-and-tie method (STM) and the elastic-plastic stress fields method, respectively. In this study, a performance-based optimization framework, called strut-and-tie performance-based optimization, was developed. The method and its application are presented in this paper. The method applies a performance-based optimization process in an STM-designed structural member. The finite element method was used to measure the performance along the optimization process. A large-scale experimental test was conducted on the first specimen. The modified compression-field theory (MCFT) and the digital image correlation technique were used to investigate the failures of the tested specimen. In addition, a numerical simulation strategy that combines damage theory with MCFT was used. The numerical results showed good agreement with the experimental results of the STM-designed specimen. Finally, the same numerical approach was utilized to predict the behavior of the other two members. Comparisons in terms of the use of materials and structural performance demonstrated that the proposed method for the design of deep beams is promising.
Keyword:
Strut-and-tie method
Stress fields method
Strut-and-tie performance-based optimization
D-regions
Deep beam
Digital image correlation
Large-scale test
期刊
IF:
4.3
论文数:
1.2W
被引数:
2.7W
机构
引用论文
.png){kind=icon}
Convergent and mesh-independent solutions for the bi-directional evolutionary structural optimization method双向进化结构优化方法的收敛和网格无关解
PREAI
分享收藏SURF: A connectivity-based space filling curve construction algorithm in high genus 3D surface WSNsSURF: 一种基于连通性的高属三维曲面WSNs空间填充曲线构建算法
PREAI
分享收藏Topology optimization with nozzle size restrictions for material extrusion-type additive manufacturing材料挤压型增材制造中喷嘴尺寸约束的拓扑优化
PREAI
分享收藏Modeling reinforced concrete structures using coupling finite elements for discrete representation of reinforcements使用耦合有限元对钢筋混凝土结构进行建模，以离散表示钢筋
OAAI
OAAI分享收藏分享收藏
查看更多内容