Luís A.G. Bitencourt - Publications, H-index & Citations

Luís A.G. Bitencourt

university of são paulo

17H指数

60论文数

1.1K被引数

收录论文 30

发表时间

A nonlinear evolutionary topology optimization framework for concrete structures based on Ottosen and principal stress sensitivities 基于Ottosen和主应力灵敏度的混凝土结构非线性进化拓扑优化框架

COMPUTERS & STRUCTURES

IF4.8

2026-09-15

OAAI

Rodrigo Reis Amaral; Amanda Tafuri Costa; Herbert Martins Gomes; Luís Antônio Guimarães Bitencourt

Correlation between inductive fiber-orientation measurements and DEWS post-cracking response in conventional and recycled-aggregate steel fiber-reinforced concrete 传统和再生骨料钢纤维增强混凝土中感应纤维取向测量与DEWS开裂后响应的相关性

Construction and Building Materials

IF8

2026-07-27

OAAI

Leonardo P.M.A. Godoy; Thomaz E.T. Buttignol; Leandro M. Trautwein; Amanda T. Costa; Luís A.G. Bitencourt

Effect of DEWS test simplification on the design post-crack parameters of steel fiber reinforced concrete with different fiber contents DEWS测试简化对含不同纤维含量的钢纤维增强混凝土开裂后参数设计的影响

CONSTRUCTION AND BUILDING MATERIALS

IF8

2025-04-01

PREAI

Coronel, Stefany dos Anjos; Serafini, Ramoel; Rambo, Dimas Alan Strauss; Salvador, Renan Picolo; Bitencourt Junior, Luis Antonio Guimaraes

Steel fiber reinforced recycled aggregate concrete as structural material: From predicting post-cracking parameters to designing beams aided by FEM-based model

STRUCTURES

IF4.3

2025-01-01

PREAI

Costa, Amanda T.; de Figueiredo, Antonio D.; Monte, Renata; Bitencourt Jr, Luis A. G.

Experimental and numerical investigation of flexural behavior of precast tunnel segments with hybrid reinforcement 混合加固预制隧道管片抗弯性能的试验与数值研究

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY

IF7.4

2024-12-01

PREAI

de Andrade, Guilherme G.; de Figueiredo, Antonio D.; Galobardes, Isaac; da Silva, Marco A. A. P.; de la Fuente, Albert; Bitencourt Jr, Luis A. G.

Generative design framework for RC deep beams using topology optimization and generative tie method: Experimental and numerical investigation

ENGINEERING STRUCTURES

IF6.4

2024-10-01

PREAI

Silveira, Marcos V. G.; Bitencourt Jr, Luis A. G.; Das, Sreekanta

Influence of fiber orientation on the behavior of macro synthetic fiber in short- and long-term pullout tests

MATERIALS AND STRUCTURES

IF3.9

2024-09-04

PREAI

Rocha, Thais S.; Cardoso, Daniel C. T.; Bitencourt Jr, Luis A. G.

Transient-pressure modelling in fractured porous media with a new embedded finite element approach 使用新的嵌入式有限元方法在破裂的多孔介质中进行瞬态压力建模

ADVANCES IN WATER RESOURCES

IF4.2

2024-08-01

OAAI

Damirchi, Behnam, V; Behnoudfar, Pouria; Bitencourt Jr, Luis A. G.; Manzoli, Osvaldo L.; Dias-da-Costa, Daniel

3D DEWS digital parametric modeling and manufacturing for obtaining the post-cracking parameters of SFRC

CONSTRUCTION AND BUILDING MATERIALS

IF8

2024-05-01

PREAI

Buttignol, Thomaz E. T.; dos Santos, Antonio C.; Bitencourt Jr, Luis A. G.

Experimental and numerical investigation of large-scale reinforced concrete deep beams designed with the Generative Tie Method

STRUCTURES

IF4.3

2023-12-01

PREAI

Silveira, Marcos V. G.; Bitencourt Jr, Luis A. G.; Das, Sreekanta

Macro synthetic fiber pullout behavior in short- and long-term tests

CONSTRUCTION AND BUILDING MATERIALS

IF8

2023-06-01

PREAI

Rocha, Thais da S.; Cardoso, Daniel C. T.; Bitencourt, Luis A. G., Jr.

2D mesoscale modeling of compressive fracture in concrete using a mesh fragmentation technique

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

IF3.8

2023-01-01

PREAI

Gimenes, Marcela; Rodrigues, Eduardo A.; Bitencourt Jr, Luis A. G.; Manzoli, Osvaldo L.

An integrated experimental and multiscale numerical methodology for modeling pullout of hooked-end steel fiber from cementitious matrix

CONSTRUCTION AND BUILDING MATERIALS

IF8

2022-08-01

PREAI

Mineiro, Maria L. R.; Monte, Renata; Manzoli, Osvaldo L.; Bitencourt, Luis A. G.

A performance-based optimization framework applied to a classical STM-designed deep beam

STRUCTURES

IF4.3

2022-07-01

PREAI

Silveira, Marcos V. G.; Bitencourt, Luis A. G.; Das, Sreekanta

Coupled hydro-mechanical modelling of saturated fractured porous media with unified embedded finite element discretisations

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

IF7.3

2022-04-01

PREAI

Damirchi, Behnam, V; Bitencourt, Luis A. G., Jr.; Manzoli, Osvaldo L.; Dias-da-Costa, Daniel

Design and experimental investigation of deep beams based on the Generative Tie Method

ENGINEERING STRUCTURES

IF6.4

2022-03-01

OAAI

Silveira, Marcos V. G.; Paini, Bruno; Bitencourt Jr, Luis A. G.; Das, Sreekanta

Computational modeling of 2D frictional contact problems based on the use of coupling finite elements and combined contact/friction damage constitutive model 基于耦合有限元和组合接触/摩擦损伤本构模型的二维摩擦接触问题计算建模

FINITE ELEMENTS IN ANALYSIS AND DESIGN

IF3.5

2022-02-01

PREAI

Manzoli, Osvaldo L.; Tosati, Marco; Rodrigues, Eduardo A.; Bitencourt Jr, Luis A. G.

A transient creep investigation applied to the mesoscopic analysis of plain concrete under uniaxial compression at high temperature

FIRE SAFETY JOURNAL

IF3.3

2021-12-01

PREAI

Buttignol, Thomaz E. T.; Bitencourt Jr, Luis A. G.

A new discrete fracture approach based on the use of coupling finite elements for modeling fluid transport in naturally fractured porous media

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

IF7.3

2021-12-01

PREAI

Manzoli, Osvaldo L.; Borges, Livia F. A.; Rodrigues, Eduardo A.; Cleto, Pedro R.; Maedo, Michael A.; Bitencourt, Luis A. G., Jr.

A concurrent multiscale approach for modeling recycled aggregate concrete

CONSTRUCTION AND BUILDING MATERIALS

IF8

2021-01-01

PREAI

Rodrigues, Eduardo A.; Gimenes, Marcela; Bitencourt Jr, Luis A. G.; Manzoli, Osvaldo L.

研究方向