.png){kind=icon}
返回
A simulation method to estimate task-specific uncertainty in 3D microscopy
.png){kind=icon}
OA
AI
DOI：10.1016/j.measurement.2018.01.026.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Traceability in micro-metrology requires an infrastructure of accredited metrology institutes, effective performance verification procedures, and task specific uncertainty estimation. Focusing on the latter, this paper proposes an approach for the task specific uncertainty estimation based on simulation for a generic 3D microscope. The proposed simulation approach is based on the identification and a successive parameter estimation of an empirical model of measured points. The model simulates the probing error of the 3D microscope based on a Gaussian process model, thus including the correlation among close points. Parameters for the error simulation are estimated by a deep analysis of error sources of the 3D microscope. Validations of the proposed simulation approach are carried out in the case of focus variation microscopy (FVM), considering several case studies. The procedure proposed in the ISO/TS 15530-4 standard are applied for validation.
Keyword:
Uncertainty
3D microscopy
Geometrical metrology
Micro-metrology
ISO/TS 15530-4
Focus-variation
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
5.6
论文数:
2.1W
被引数:
5.4W
机构
引用论文
A SUSTENTABILIDADE SOB A PERSPECTIVA DO TRIPLE BOTTOM LINE NAS PEQUENAS EMPRESAS DE PRODUTOS VEGANOS
OAAI
.png){kind=icon}
OAAI分享收藏分享收藏分享收藏Uncertainty determination for CMMs by Monte Carlo simulation integrating feature form deviations
PREAI
分享收藏
查看更多内容