返回
An agile layer-resolved SOFC stack model using physics-informed neural network
DOI:10.1016/j.ijhydene.2023.06.258.png)
摘要
En 中文
Solid Oxide Fuel Cell (SOFC) stacks are one of the most critical modules in industrial SOFC energy conversion systems. Although the detailed multiphysics distribution has been elaborately studied with accurate 3-dimensional (3D) models, development and validation of agile stack model is yet inadequate. Due to slow and tedious meshing and simulation, fast prototyping of stacks remains a challenge. Therefore, a 30-cell stack was tested at varied temperatures and gas flowrates and a real-time transient layer-resolved stack model is established and calibrated using the measured data, which gives a Root-MeanSquare (RMS) prediction error of 2.21% for measured voltages and 1.53 degrees C for measured temperatures. With layer resolution, the stack model shows the voltage, average temperature, as well as fuel and air flowrates of each cell. Moreover, the stack model reveals the relation of voltage distribution at varied fuel flowrates with temperature distribution. Furthermore, the stack model is potentially applicable to stack scaling effects, or designing Balance of Plant (BoP). (c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Keyword:
Solid oxide fuel cell
Stack
Model
Inhomogeneity
Balance of plant
期刊
IF:
8.3
论文数:
5.5W
被引数:
23.1W
机构
引用论文
Oxidation-induced degradation and performance fluctuation of solid oxide fuel cell Ni anodes under simulated high fuel utilization conditions模拟高燃料利用率条件下固体氧化物燃料电池Ni阳极的氧化诱导降解和性能波动
Solid oxide fuel cell (SOFC) performance evaluation, fault diagnosis and health control: A review固体氧化物燃料电池 (SOFC) 性能评估,故障诊断和健康控制: 综述
Electrochemical performance of solid oxide fuel cell: Experimental study and calibrated model
ENERGY
IF9.4

