.png){kind=icon}
返回
Atomic force microscope for accurate dimensional metrology
.png){kind=icon}
PRE
AI
DOI：10.1016/j.precisioneng.2008.04.007.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Our prototype atomic force microscope (AFM) uses a piezoelectric tube to scan a probe tip over a sample surface, while a PC-based digital controller maintains a constant tip-sample separation based on feedback from a quartz tuning fork proximity sensor. We have successfully run the AFM in both the shear and tapping modes, using optical fibers as probe tips. The AFM utilizes a set of capacitance sensors with a spherical target for direct measurement of probe tip displacements. We have used this system to image localized surface topography of a square wave silicon calibration grating with localized step height accuracy of 1 nm in the vertical direction and vertical RMS noise less than 4 nm. The lateral accuracy is on the order of 100 nm, and our largest lateral measurement scans have been performed on 20 mu m x 20 mu m regions with step heights of 26.5 nm and a modest scan speed of 0.8 mu m/s. (C) 2008 Published by Elsevier Inc.
Keyword:
Atomic force microscope
Capacitance sensors
Probe
Metrology
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
机构
引用论文
分享收藏Computer Simulation of the Incorporation of V2+, V3+, V4+, V5+ and Mo3+, Mo4+, Mo5+, Mo6+ Dopants in LiNbO3.png)
Crystals
OAAI
CrystalsIF0
OAAI分享收藏
查看更多内容