.png){kind=icon}
返回
Bio-inspired bimaterial composites patterned using three-dimensional printing
.png){kind=icon}
PRE
AI
DOI：10.1016/j.compositesb.2019.02.008.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Multi-material composite structures exhibit highly enhanced mechanical properties by mimicking natural hierarchical materials such as nacre, crocodiles, armadillos, and turtles. Such composites have been reported to overcome the limitations of a single material. Numerous studies have developed bio-inspired composites with improved mechanical properties by using the patterns of natural materials. However, optimization of the patterns and configurations has not been studied comprehensively thus far. In this study, nacre-like laminated composites are designed, fabricated, and tested both experimentally and numerically to explore their energy absorption capacity. Nacre-like patterns are made by employing the Voronoi diagram, and produced into three-dimensional (3D) specimens of the structures by use of a dual extrusion 3D printer with two different plastic materials. Three-point bending tests are conducted to evaluate the energy absorption capacity of the specimen, which is found to be 11% larger than that of a single plastic specimen. The nacre-like structures are modeled reflecting the experimentally determined material properties, and the three-point bending tests are simulated by the finite element method. The experiment and numerical results of the tests are in good agreement. Multi material composites with the natural hierarchical patterns are very promising to provide enhancement in mechanical properties. However, the adhesion between different materials in 3D printing still needs to be improved to fully harness the potential for further development.
Keyword:
Layered structures
Mechanical properties
Mechanical testing
Finite element analysis (FEA)
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
14.2
论文数:
1.2W
被引数:
8.9W
机构
暂无机构信息
引用论文
Bone-Inspired Materials by Design: Toughness Amplification Observed Using 3D Printing and Testing
OAAI
OAAI分享收藏
Numerical simulation of ballistic impact behavior of bio-inspired scale-like protection system.png)
MATERIALS & DESIGN
MATERIALS & DESIGNIF7.9
PREAI
分享收藏
查看更多内容