返回
Distributed feedback transistor laser
DOI:10.1063/1.3453656.png)
摘要
En 中文
Single longitudinal mode operation of an InGaP/GaAs/InGaAs quantum well heterojunction bipolar transistor laser is reported. A third order distributed feedback surface grating is fabricated in the top emitter AlGaAs confining layers using soft photocurable nanoimprint lithography. The device produces continuous wave laser operation with a peak wavelength lambda=959.75 nm and threshold current I(B)=13 mA operating at -70 degrees C. For devices with cleaved ends a sidemode suppression ratio >25 dB has been achieved. (C) 2010 American Institute of Physics. [doi:10.1063/1.3453656]
Keyword:
bipolar transistors
distributed feedback lasers
III-V semiconductors
indium compounds
nanolithography
semiconductor lasers
期刊
IF:
3.6
论文数:
10.4W
被引数:
17.8W
机构
引用论文
The effect of metallurgical condition and irradiation on strength and ductility of Zr-1.14% Cr-0.1% Fe冶金状态和辐照对Zr-1.14% Cr-0.1% Fe强度和韧性的影响

