Frequency-Controlled Fluidic Oscillators for Soft Robots

doi:10.1002/advs.202408879

2024-10-08

DOI：10.1002/advs.202408879

原文链接

原文求助

摘要

En 中文

Electronic-free controls have recently emerged as one of the main topics in soft robotics. However, electronic-free fluidic circuits still lack controllability and reconfigurability to achieve different functions. Here, reconfigurable pneumatic valves that widen the design space of fluidic circuits are presented. The significance of two parameters on the valve's operation: a pre-defined manufacturing parameter that sets the initial operational range of the valve, and a second, on-the-fly modifiable geometric parameter that shifts the behavior of the valve during operation is shown. It is demonstrated that equipping the valve with these reconfigurable features enables the tuning of fluidic oscillatory circuits as illustrated by two examples: a frequency-controlled relaxation oscillator and a reconfigurable ring oscillator. The relaxation oscillator is employed to control the actuation frequency of a soft hopper, which is able to achieve 80 to 125 hops min-1 and a hopping speed ranging from approximate to 1 to approximate to 1.185 BL s-1. Additionally, the reconfigurable ring oscillator is used to demonstrate how each output frequency can be controlled independently, via a soft robotic crawler that can navigate in three directions, and a volume-controlled fluidic pump able to achieve mixing of solutions in environments where electronic components cannot operate. This work investigates how reconfigurability enables better control of soft robots. By embedding reconfigurable geometric parameters in fluidic valves' design, soft robots can operate in different modes without replacing circuit components or introducing new pressure inputs. This is showcased by a soft hopper that hops at different speeds, a soft crawler that locomotes in different directions, and an electronic-free fluidic pump. image

Keyword:

electronic-free circuits

pneumatic control

soft robotics