.png){kind=icon}
返回
Interactive infill topology optimisation guided by user drawn patterns
.png){kind=icon}
OA
AI
DOI：10.1080/17452759.2024.2361864.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Widespread use of topology optimisation as a design tool for additive manufacturing faces major inhibiting obstacles, such as high computational costs and complexity, concern for other failure modes, and manufacturability. Interactive infill topology optimisation presents an alternative approach to circumvent some of these barriers. The novel contribution of the present work prompts the user to draw a tailored infill pattern, specify regions of interest to locate the infill, and control how strictly the pattern is replicated in the material layout of the design using appearance constraints. This approach improves engineering metrics not directly included in the optimisation formulation by incorporating the user's engineering experience, thereby avoiding increased computational costs, parameter tuning, and numerical artifacts associated with complex objective functions and constraints. Two 2D benchmark examples increase the linear buckling resistance and energy absorption, respectively, and a 2.5D example minimises compliance while reducing the quantity of overhang supports for additive manufacturing.
Keyword:
Topology optimisation
iterative user interaction
infill
appearance constraint
期刊
IF:
8.8
论文数:
1.1K
被引数:
4.9K
机构
暂无机构信息
引用论文
Topology optimization with linearized buckling criteria in 250 lines of Matlab在Matlab的250线中使用线性化屈曲准则进行拓扑优化
.png){kind=icon}
PREAI
分享收藏Stiffness design of geometrically nonlinear structures using topology optimization基于拓扑优化的几何非线性结构刚度设计
PREAI
分享收藏
分享收藏Design of buckling-induced mechanical metamaterials for energy absorption using topology optimization屈曲诱导的机械超材料吸能拓扑优化设计
PREAI
分享收藏
查看更多内容