.png){kind=icon}
返回
Matching kit interface for building refurbishment processes with 2D modules
.png){kind=icon}
OA
AI
DOI：10.1016/j.autcon.2019.103003.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
A need exists for faster installation of prefabricated modules in the refurbishment market. Current solutions for installing and fitting prefabricated modules on existing buildings are time consuming. The objective of this research is to reduce the time currently required for the installation of timber-based 2D modules by using innovative technologies while improving placement accuracy. A novel installation concept was proposed based on a digitally produced matching kit interface that corrects existing building's irregularities and connector placement deviations. This solution was tested, validated, and compared in several manufacturing contexts. The tests recorded measurable variables such as the manufacturing time and placement accuracy of the modules. The results demonstrate decreases up to 73% in installation time and placement deviations of less than 2 mm.
Keyword:
Automated
Customization
Installation
Refurbishing
Prefabrication
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
11.5
论文数:
6.3K
被引数:
4.2W
机构
引用论文
.png){kind=icon}
Surveying and digital workflow in energy performance retrofit projects using prefabricated elements
PREAI
分享收藏Accuracy of implant placement based on pre-surgical planning of three-dimensional cone-beam images: a pilot study基于三维锥形束图像的术前计划的植入物放置精度: 一项初步研究OAAI
OAAI分享收藏 没有更多内容
没有更多内容