.png){kind=icon}
返回
Metalens-based stereoscopic microscope
.png){kind=icon}
PRE
AI
DOI：10.1364/PRJ.456638.png)
.png){kind=icon}
原文求助.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Stereoscopic microscopy is a promising technology to obtain three-dimensional microscopic images. Such microscopes are based on the parallax effect, and as such require two lenses to focus at two different points. Geometrical constraints, however, restrict their numerical apertures to about 0.2, thus limiting the system's resolution. Higher numerical apertures (similar to 0.35) can be achieved with designs using only one bulk lens, but such systems are similar to 10 times more costly than the conventional ones. Thus, there is a pressing need for alternative solutions to improve the resolution of stereoscopic systems. Here, we show that high-resolution and low-cost stereoscopic systems can be obtained using birefringent single-layer metalenses. We design and fabricate a birefringent metalens operating at 532 nm with a numerical aperture as high as 0.4. The metalens is then used to demonstrate high-resolution stereoscopic imaging of biological samples. The microscopic images are further displayed and perceived vividly in an autostereoscopic display. Our demonstration paves the way to a new strategy to achieve high-resolution and low-cost stereoscopic microscopes. (C) 2022 Chinese Laser Press.
Keyword:
VISIBLE WAVELENGTHS
DIELECTRIC METASURFACES
POLARIZATION
RESOLUTION
DISPLAY
OPTICS
LENSES
ABERRATIONS
PHASE
期刊
IF:
7.2
论文数:
2.4K
被引数:
1.3W
机构
引用论文
Characterization of Biocompatible Materials Using Stereo Microscope 3D Digital Image Correlation
PREAI
分享收藏Dielectric longitudinal bifocal metalens with adjustable intensity and high focusing efficiency.png)
OPTICS EXPRESS
OAAI
OPTICS EXPRESSIF3.3
OAAI分享收藏Varifocal Metalens for Optical Sectioning Fluorescence Microscopy用于光学切片荧光显微镜的变焦超透镜NANO LETTERS
OAAI
NANO LETTERSIF9.1
OAAI分享收藏
查看更多内容