arrow
返回

Quantitative microbolometer-based thermoelastic stress analysis

delete2023-01-01
delete6
delete
OA
AI
I
Irene Jiménez-Fortunato *
D
Daniel Bull
O
O.T. Thomsen
J
J.M. Dulieu‐Barton
DOI:10.1016/j.optlaseng.2022.107276delete
delete原文链接
delete分享
delete收藏
查看原文
摘要

摘要

En 中文
The use of microbolometers for Thermoelastic Stress Analysis (TSA) has the potential of substantially reducing deployment costs, as well as providing more compact and lightweight solutions in comparison to more costly, bulky and less rugged photon detector based infrared cameras. However, microbolometer performance in terms of response time and sensitivity is less than what can be achieved with photon detectors. As the use of mi-crobolometers for TSA is becoming more widespread, it is timely to devise a means of assessing microbolometer performance and identifying the limitations of using such a system for TSA. A simulation approach is devised that enables the effect of the microbolometer response time on transient signals (such as that from TSA) to be investigated. As the TSA involves measuring a small transient temperature change, usually induced by sinusoidal cyclic loading, the simulation approach also includes the effect of a noisy non-sinusoidal signal. To identify any deleterious effects cause by a cyclic load, the transient temperature change is also generated using an optical chopper and a black body source. The variables studied are the Signal-to-Noise Ratio (SNR), the impact of dif-ferent waveforms, variation in the signal mean, as well as in-built system features such as the noise reduction. A new experimentally validated calibration approach is presented that accounts for the microbolometer response time and rolling averages introduced by inbuilt noise reduction features. It is shown the calibration approach is independent of specimen material and camera frame rates, and it is demonstrated on a CFRP test specimen containing a hidden crack.
Keyword:
Infrared cameras
Thermoelastic stress analysis
Microbolometers
AI总结

AI总结

对已上传原文的论文进行重点信息的提取,主要内容包括:简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。

期刊

Optics and Lasers in Engineering 封面图
Optics and Lasers in Engineering
IF:
3.7
论文数:
7.3K
被引数:
1.7W

机构

U
university of southampton
学者数:
3.3W
论文数: 3.2W
被引数: 52
U
University of Bristol
学者数:
3.1W
论文数: 3.0W
被引数: 5.3W
引用论文

引用论文

Macrolides: A Canadian Infectious Disease Society Position Paper
err2001-08-01
err0
errOAAI
errS McKenna; GA Evans; Canadian Infectious Disease Society Antimicrobial Agents Com
err分享
err收藏
Flow instability analysis of supercritical water-cooled reactor CSR1000 based on frequency domain
err2012-11-01
err0
PREAI
errXiaoyan Tian; Wenxi Tian; Dahuan Zhu; Suizheng Qiu; Guanghui Su; Bangyang Xia
err分享
err收藏
Time calibration of thermal rolling shutter infrared cameras热卷帘式红外相机的时间标定
err2017-01-01
err4
errOAAI
errPeeters, J.; Louarroudi, E.; De Greef, D.; Vanlanduit, S.; Dirckx, J. J. J.; Steenackers, G.
err分享
err收藏
Follow-up cancer care: perspectives of Aboriginal and Torres Strait Islander cancer survivors
err2017-01-12
err0
PREAI
errJ. A. Meiklejohn; G. Garvey; R. Bailie; E. Walpole; J. Adams; D. Williamson; J. Martin; C. M. Bernardes; B. Arley; B. Marcusson; P. C. Valery
err分享
err收藏
On the source of the thermoelastic response from orthotropic fibre reinforced composite laminates
err2021-10-01
err20
errOAAI
errJimenez-Fortunato, Irene; Bull, Daniel J.; Thomsen, Ole T.; Dulieu-Barton, Janice M.
err分享
err收藏
学者 查看更多内容