Quantitative microbolometer-based thermoelastic stress analysisOPTICS AND LASERS IN ENGINEERINGIF3.72023-01-016OAAI
Characterisation of strain localisation under cyclic loading at 450 °C by SEM-DIC in a PM Ni-based superalloyMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF72022-08-015OAAI
DRAM: A three-dimensional analytical model for the mobilisation of root reinforcement in direct shear conditionsECOLOGICAL ENGINEERINGIF4.12022-06-0111OAAI
On the source of the thermoelastic response from orthotropic fibre reinforced composite laminatesCOMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURINGIF8.92021-10-0120OAAI
Data rich imaging approaches assessing fatigue crack initiation and early propagation in a DS superalloy at room temperatureMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSINGIF72021-02-016OAAI
Real-time through-thickness and in-plane strain measurement in carbon fibre reinforced polymer composites using planar optical Bragg gratingsOPTICS AND LASERS IN ENGINEERINGIF3.72020-10-0119OAAI
Strain accumulation and fatigue crack initiation at pores and carbides in a SX superalloy at room temperatureINTERNATIONAL JOURNAL OF FATIGUEIF6.82018-09-0160OAAI
Image-enhanced modelling of residual compressive after impact strength in laminated compositesCOMPOSITE STRUCTURESIF7.12018-05-0114OAAI
Effects of oxygen-related damage on dwell-fatigue crack propagation in a P/M Ni-based superalloy: From 2D to 3D assessmentINTERNATIONAL JOURNAL OF FATIGUEIF6.82017-06-0143OAAI
Residual strength and damage characterization of repaired glass/epoxy composite laminates using AE and DICCOMPOSITE STRUCTURESIF7.12016-09-0172OAAI
Investigation of the response to low velocity impact and quasi-static indentation loading of particle-toughened carbon-fibre composite materialsCOMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURINGIF8.92015-07-0160OAAI
Cure cycle effect on impact resistance under elevated temperatures in carbon prepreg laminates investigated using acoustic emissionCOMPOSITES PART B-ENGINEERINGIF14.22015-06-0124PREAI
Effect of temperature on low velocity impact damage and post-impact flexural strength of CFRP assessed using ultrasonic C-scan and micro-focus computed tomographyCOMPOSITES PART B-ENGINEERINGIF14.22014-11-0162PREAI
The influence of toughening-particles in CFRPs on low velocity impact damage resistance performanceCOMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURINGIF8.92014-03-0161OAAI
Three-dimensional assessment of low velocity impact damage in particle toughened composite laminates using micro-focus X-ray computed tomography and synchrotron radiation laminographyCOMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURINGIF8.92013-09-0198PREAI