.png){kind=icon}
返回
Redeployable, 4D printed wave spring actuators
.png){kind=icon}
OA
AI
DOI：10.1016/j.matdes.2023.112163.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
Wave springs are a novel type of axial compression spring that offer complete axial load transmission and a significant free height reduction when compared to coil springs. In this paper, it is shown that direct 4D printing using bilayers on a fused filament fabrication system can be used to create deployable, polymer wave springs that do not suffer from layering effects, as is common in other cyclically loaded additively manufactured parts. Bilayer actuators enable a flat print configuration and subsequent deployment by a thermal stimulus that then aligns the layers in the direction of the wave in the spring. Due to this, the springs exhibit exceptional performance under cyclic loading, reaching 10(4) cycles without failure. After plastic deformation caused by extended cyclic loading, the springs can be redeployed to recover their original mechanical properties using cold programming. These findings show the great potential of direct 4D printing in fused filament fabrication to create functional, 4D printed components with complex geometry and greatly increased lifespan compared to conventional 3D printed parts. The presented approach to compression spring fabrication further provides a standard component that enables the design of highly integrated, monolithically printed, and tunable mechanical systems.
Keyword:
4D Printing
Wave Springs
Cyclic Properties
Fatigue
Multimaterial additive manufacturing
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
M
IF:
7.9
论文数:
1.9W
被引数:
9.8W
机构
引用论文
A new trend of using poly(vinyl alcohol) in 3D and 4D printing technologies: Process and applications在3D和4D打印技术中使用聚乙烯醇的新趋势: 工艺和应用
PREAI
分享收藏分享收藏Design and Computational Modeling of a 3D Printed Pneumatic Toolkit for Soft Robotics.png)
SOFT ROBOTICSOAAI
SOFT ROBOTICSIF6.1
OAAI分享收藏3D-Printed Programmable Mechanical Metamaterials for Vibration Isolation and Buckling ControlSUSTAINABILITY
OAAI
SUSTAINABILITYIF3.3
OAAI分享收藏
查看更多内容