.png){kind=icon}
返回
Redundancy Reduction for Sensor Deployment in Prosthetic Socket: A Case Study
.png){kind=icon}
OA
AI
DOI：10.3390/s22093103.png)
.png){kind=icon}
.png){kind=icon}
分享.png){kind=icon}
收藏
摘要
En 中文
The irregular pressure exerted by a prosthetic socket over the residual limb is one of the major factors that cause the discomfort of amputees using artificial limbs. By deploying the wearable sensors inside the socket, the interfacial pressure distribution can be studied to find the active regions and rectify the socket design. In this case study, a clustering-based analysis method is presented to evaluate the density and layout of these sensors, which aims to reduce the local redundancy of the sensor deployment. In particular, a Self-Organizing Map (SOM) and K-means algorithm are employed to find the clustering results of the sensor data, taking the pressure measurement of a predefined sensor placement as the input. Then, one suitable clustering result is selected to detect the layout redundancy from the input area. After that, the Pearson correlation coefficient (PCC) is used as a similarity metric to guide the removal of redundant sensors and generate a new sparser layout. The Jenson-Shannon Divergence (JSD) and the mean pressure are applied as posterior validation metrics that compare the pressure features before and after sensor removal. A case study of a clinical trial with two sensor strips is used to prove the utility of the clustering-based analysis method. The sensors on the posterior and medial regions are suggested to be reduced, and the main pressure features are kept. The proposed method can help sensor designers optimize sensor configurations for intra-socket measurements and thus assist the prosthetists in improving the socket fitting.
Keyword:
pressure sensor system
prosthetic socket
redundancy detection
redundancy reduction
selforganizing map
Pearson correlation coefficient
AI总结
对已上传原文的论文进行重点信息的提取，主要内容包括：简要概述、研究摘要、背景介绍、关键亮点、图文解析、展望与总结。
期刊
IF:
3.5
论文数:
7.2W
被引数:
20.9W
机构
引用论文
Stabilization of Non-holonomic 03 DOF Hovercraft using Robust RST Control Design非完整3自由度气垫船的鲁棒RST控制设计稳定化
OAAI
OAAI分享收藏分享收藏Techniques for Interface Stress Measurements within Prosthetic Sockets of Transtibial Amputees: A Review of the Past 50 Years of Research经胫骨截肢者假体内的界面应力测量技术: 过去50年的研究回顾.png)
SENSORSOAAI
SENSORSIF3.5
OAAI分享收藏分享收藏In-Socket Sensory System for Transfemoral Amputees Using Piezoelectric Sensors: An Efficacy Study
PREAI
分享收藏
查看更多内容